LCA710 Single Pole, Normally Open OptMOS(R) Relay INTEGRATED CIRCUITS DIVISION Parameter Blocking Voltage Load Current On-Resistance (max) Rating 60 1 0.5 Units VP Arms / ADC Features * Low On-Resistance: 0.5 * High Current Handling Capability: 1A * 3750Vrms Input/Output Isolation * Low Drive Power Requirements * High Reliability * Arc-Free With No Snubbing Circuits * No EMI/RFI Generation * Small 6-Pin Packages * Flammability Rating UL 94 V-0 * Surface Mount and Tape & Reel Versions Available Applications * * * * * * * * * * Instrumentation Multiplexers Data Acquisition Electronic Switching I/O Subsystems Meters (Watt-Hour, Water, Gas) Medical Equipment--Patient/Equipment Isolation Security Aerospace Industrial Controls Description The LCA710 is a 60V, 1A, 0.5, normally open (1-Form-A) solid state relay featuring low on-resistance and high current handling capability. It uses optically coupled MOSFET technology to provide 3750Vrms of input to output isolation. Its optically coupled outputs, which use the patented OptoMOS architecture, are controlled by a highly efficient infrared LED. The LCA710 can be used to replace mechanical relays, and offers the superior reliability associated with semiconductor devices. Because it has no moving parts, it can offer faster, bounce-free switching in a more compact surface mount or thru-hole package. Approvals * UL Recognized Component: File E76270 * CSA Certified Component: Certificate 1175739 * EN/IEC 60950-1 Certified Component: Certificate available on our website Ordering Information Part # LCA710 LCA710R LCA710RTR LCA710S LCA710STR Description 6-Pin DIP (50/Tube) 6-Pin Lo-Profile Surface Mount (50/Tube) 6-Pin Lo-Profile Surface Mount (1000/Reel) 6-Pin Surface Mount (50/Tube) 6-Pin Surface Mount (1000/Reel) Switching Characteristics of Normally Open Devices Pin Configuration AC/DC Configuration 1 + Control - Control Do Not Use 6 2 5 3 4 Form-A Load Do Not Use IF Load 90% 10% ILOAD DC Only Configuration + Control - Control Do Not Use DS-LCA710-R10 1 6 2 5 3 4 ton toff + Load - Load www.ixysic.com 1 INTEGRATED CIRCUITS DIVISION LCA710 Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Derate linearly 1.33 mW / C 2 Derate linearly 6.67 mW / C Ratings 60 5 50 1 150 800 3750 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Typical values are characteristic of the device at +25C, and are the result of engineering evaluations. They are provided for information purposes only, and are not part of the manufacturing testing requirements. Electrical Characteristics @ 25C Parameter Output Characteristics Load Current, Continuous AC/DC Configuration DC Configuration Peak Load Current On-Resistance AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current to Activate Input Control Current to Deactivate Input Voltage Drop Reverse Input Current Common Characteristics Input to Output Capacitance 2 Conditions Symbol Min Typ Max Units - IL - - 1 1.8 5 Arms / ADC ADC AP t<10ms ILPK - 0.3 0.1 - 0.5 0.15 1 ILEAK - IF=0mA, VL=0V, f=1MHz ton toff - - 105 2.5 0.25 - IL=1A IF=10mA VR=5V IF IF VF IR 0.4 0.9 - 0.7 1.35 - 10 1.56 10 mA mA V A VIO=0V, f=1MHz CIO - 3 - pF IL=1A IL=1.8A VL=60VP IF=10mA, VL=10V RON www.ixysic.com A ms pF R10 INTEGRATED CIRCUITS DIVISION LCA710 PERFORMANCE DATA* Typical Turn-On Time (N=50, IF=10mA, IL=1ADC) Typical LED Forward Voltage Drop (N=50, IF=10mA) Device Count (N) 25 20 15 10 5 1.17 1.19 1.21 1.23 LED Forward Voltage (V) 20 15 10 5 0.27 0.30 0.33 0.36 Turn-On Time (ms) Device Count (N) 10 5 0.078 0.083 0.088 0.093 0.098 Turn-Off Time (ms) 0.103 Typical On-Resistance Distribution (N=50, IF=10mA, IL=1ADC) 35 30 20 15 10 5 25 20 15 10 5 0 0 1.00 1.05 1.10 LED Current (mA) 5 0.39 25 15 0.95 10 Typical IF for Switch Dropout (N=50, IL=1ADC) Typical IF for Switch Operation (N=50, IL=1ADC) 0.90 15 0 0.24 1.25 20 Device Count (N) 20 0 0 25 25 Device Count (N) Device Count (N) 30 25 Device Count (N) 35 Typical Turn-Off Time (N=50, IF=10mA, IL=1ADC) 0 0.90 1.15 0.95 1.00 1.05 1.10 LED Current (mA) 1.15 0.215 0.197 0.199 0.201 0.203 On-Resistance (:) 0.205 Typical Blocking Voltage Distribution (N=50) 35 Device Count (N) 30 25 20 15 10 5 0 72 IF=50mA IF=30mA IF=20mA IF=10mA 1.2 1.0 0.8 -40 -20 0 20 40 60 80 Temperature (C) 100 120 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 Typical Turn-Off Time vs. LED Forward Current (IL=1ADC) 0.09 0.08 Turn-Off Time (ms) Turn-On Time (ms) LED Forward Voltage Drop (V) 1.8 1.4 82 Typical Turn-On Time vs. LED Forward Current (IL=1ADC) Typical LED Forward Voltage Drop vs. Temperature 1.6 74 76 78 80 Blocking Voltage (VP) 0.07 0.06 0.05 0.04 0.03 0.02 0.01 0 0 5 10 15 20 25 30 35 40 Forward Current (mA) 45 50 0 5 10 15 20 25 30 35 40 LED Forward Current (mA) 45 50 *Unless otherwise noted, data presented in these graphs is typical of device operation at 25C. For guaranteed parameters not indicated in the written specifications, please contact our application department. R10 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION LCA710 PERFORMANCE DATA* Typical Turn-On Time vs. Temperature (IL=1ADC) 1.4 0.14 IF=5mA 1.0 0.8 0.6 IF=10mA 0.4 IF=10mA 0.08 0.06 IF=5mA 0.04 0.02 0 -40 -20 0 20 40 60 Temperature (C) 80 0.40 1000 800 600 400 200 0 -200 -400 -600 -800 -1000 -0.3 -20 0 20 40 60 Temperature (C) 80 100 Typical Load Current vs. Load Voltage (IF=10mA) 0.30 0.25 0.20 0.15 0.10 0.05 -20 0 20 40 60 Temperature (C) 80 100 Typical Blocking Voltage vs. Temperature 1.01 1.00 0.99 0.98 0.97 0.96 0.95 0.94 0.93 0.92 0.91 -40 200 -0.2 0 -0.1 0.1 Load Voltage (V) 0.2 0 -40 0.3 -20 0 20 40 60 Temperature (C) 80 100 Load Current (A) Leakage (PA) 7 0.017 0.016 0.015 0.014 0.012 -40 -20 0 20 40 60 80 Temperature (C) 100 120 Energy Rating Curve 0.018 73.0 -40 IF=5mA 400 79.0 0.013 100 IF=10mA 600 80.0 74.0 80 800 8 75.0 20 40 60 Temperature (C) 1000 0.019 76.0 0 1200 81.0 77.0 -20 1400 Typical Leakage vs. Temperature Measured Across Pins 4&6 78.0 Typical IF for Switch Operation vs. Temperature (IL=1ADC) Maximum Load Current vs. Temperature Load Current (mA) 0.35 0 -40 0 -40 100 Typical On-Resistance vs. Temperature (IF=10mA, IL=1ADC) 0.45 On-Resistance (:) 0.10 Load Current (mA) 0.2 LED Current (mA) 0.12 Turn-Off Time (ms) Turn-On Time (ms) 1.2 Blocking Voltage (VP) Typical Turn-Off Time vs. Temperature (IL=1ADC) 6 5 4 3 2 1 -20 0 20 40 60 Temperature (C) 80 100 0 10Ps 100Ps 1ms 10ms 100ms Time 1s 10s 100s *Unless otherwise noted, data presented in these graphs is typical of device operation at 25C. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.ixysic.com R10 INTEGRATED CIRCUITS DIVISION LCA710 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits classifies its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) classification as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Classification LCA710 / LCA710R / LCA710S MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Soldering Profile Provided in the table below is the Classification Temperature (TC) of this product and the maximum dwell time the body temperature of this device may be (TC - 5)C or greater. The classification temperature sets the Maximum Body Temperature allowed for this device during lead-free reflow processes. For through-hole devices, and any other processes, the guidelines of J-STD-020 must be observed. Device Classification Temperature (Tc) Dwell Time (tp) Max Reflow Cycles LCA710 LCA710R, LCA710S 250C 250C 30 seconds 30 seconds 1 3 Board Wash IXYS Integrated Circuits recommends the use of no-clean flux formulations. Board washing to reduce or remove flux residue following the solder reflow process is acceptable provided proper precautions are taken to prevent damage to the device. These precautions include, but are not limited to: using a low pressure wash and providing a follow up bake cycle sufficient to remove any moisture trapped within the device due to the washing process. Due to the variability of the wash parameters used to clean the board, determination of the bake temperature and duration necessary to remove the moisture trapped within the package is the responsibility of the user (assembler). Cleaning or drying methods that employ ultrasonic energy may damage the device and should not be used. Additionally, the device must not be exposed to flux or solvents that are Chlorine- or Fluorine-based. R10 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION LCA710 MECHANICAL DIMENSIONS LCA710 8.382 0.381 (0.330 0.015) PCB Hole Pattern 7.239 TYP (0.285 TYP) 2.54 0.127 (0.100 0.005) 6 - 0.800 DIA. (6 - 0.031 DIA.) 2.540 0.127 (0.100 0.005) 9.144 0.508 (0.360 0.020) 6.350 0.127 (0.250 0.005) 7.620 0.127 (0.300 0.005) Pin 1 7.620 0.254 (0.300 0.010) 1.651 0.254 (0.065 0.010) 3.302 0.051 (0.130 0.002) 0.254 0.0127 (0.010 0.0005) 6.350 0.127 (0.250 0.005) 5.080 0.127 (0.200 0.005) 4.064 TYP (0.160 TYP) Dimensions mm (inches) 0.457 0.076 (0.018 0.003) LCA710R 8.382 0.381 (0.330 0.015) 9.525 0.254 (0.375 0.010) PCB Land Pattern 0.635 0.127 (0.025 0.005) 2.54 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) 2.54 (0.10) 7.620 0.254 (0.300 0.010) 8.90 (0.3503) 1.70 (0.061) Pin 1 0.254 0.0127 (0.010 0.0005) 1.523 0.051 (0.060 0.002) 1.65 (0.0649) 1.651 0.254 (0.065 0.010) 3.302 0.051 (0.130 0.002) Dimensions mm (inches) 0.178 0.076 (0.007 0.003) LCA710S 8.382 0.381 (0.330 0.015) 9.524 0.508 (0.375 0.020) Pin 1 0.635 0.127 (0.025 0.005) PCB Land Pattern 2.54 0.127 (0.100 0.005) 2.54 (0.10) 6.350 0.127 (0.250 0.005) 0.457 0.076 (0.018 0.003) 1.651 0.254 (0.065 0.010) 7.620 0.254 (0.300 0.010) 0.254 0.0127 (0.010 0.0005) 8.90 (0.3503) 1.65 (0.0649) 0.65 (0.0255) 3.302 0.051 (0.130 0.002) 4.445 0.254 (0.175 0.010) Dimensions mm (inches) 1.651 0.254 (0.065 0.010) 6 www.ixysic.com R10 INTEGRATED CIRCUITS DIVISION LCA710 LCA710RTR & LCA710STR Tape & Reel 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=16.00 (0.63) B0 = 10.10 (0.398) K0 = 4.90 (0.19) K1 = 3.80 (0.15) A0 = 10.10 (0.398) P1 = 12.00 (0.472) User Direction of Feed Embossed Carrier Embossment Dimensions mm (inches) NOTES: 1. All dimensions carry tolerances of EIA Standard 481-2 2. The tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits' Standard Terms and Conditions of Sale, IXYS Integrated Circuits assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits' product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits reserves the right to discontinue or make changes to its products at any time without notice. 7 Specification: DS-LCA710-R10 (c)Copyright 2018, IXYS Integrated Circuits OptoMOS(R) is a registered trademark of IXYS Integrated Circuits All rights reserved. Printed in USA. 6/26/2018