INTEGRATED CIRCUITS DIVISION
www.ixysic.com
DS-LCA710-R10 1
LCA710
Single Pole, Normally Open
OptMOS® Relay
Applications
Features
Description
Parameter Rating Units
Blocking Voltage 60 VP
Load Current 1 Arms / ADC
On-Resistance (max) 0.5
Pin Configuration Switching Characteristics of
Normally Open Devices
Low On-Resistance: 0.5
High Current Handling Capability: 1A
3750Vrms Input/Output Isolation
Low Drive Power Requirements
High Reliability
Arc-Free With No Snubbing Circuits
No EMI/RFI Generation
Small 6-Pin Packages
Flammability Rating UL 94 V-0
Surface Mount and Tape & Reel Versions Available
Instrumentation
Multiplexers
Data Acquisition
Electronic Switching
I/O Subsystems
Meters (Watt-Hour, Water, Gas)
Medical Equipment—Patient/Equipment Isolation
Security
Aerospace
Industrial Controls
Approvals
UL Recognized Component: File E76270
CSA Certified Component: Certificate 1175739
EN/IEC 60950-1 Certified Component:
Certificate available on our website
Ordering Information
Part # Description
LCA710 6-Pin DIP (50/Tube)
LCA710R 6-Pin Lo-Profile Surface Mount (50/Tube)
LCA710RTR 6-Pin Lo-Profile Surface Mount (1000/Reel)
LCA710S 6-Pin Surface Mount (50/Tube)
LCA710STR 6-Pin Surface Mount (1000/Reel)
Form-A
IF
ILOAD
10%
90%
ton toff
1
3
2
4
5
6
+ Control
– Control
Do Not Use
Load
Do Not Use
Load
AC/DC Configuration
1
3
2
4
5
6
+ Control
– Control
Do Not Use
+ Load
– Load
DC Only Configuration
The LCA710 is a 60V, 1A, 0.5, normally open
(1-Form-A) solid state relay featuring low
on-resistance and high current handling capability. It
uses optically coupled MOSFET technology to provide
3750Vrms of input to output isolation.
Its optically coupled outputs, which use the patented
OptoMOS architecture, are controlled by a highly
efficient infrared LED.
The LCA710 can be used to replace mechanical
relays, and offers the superior reliability associated
with semiconductor devices. Because it has no moving
parts, it can offer faster, bounce-free switching in a
more compact surface mount or thru-hole package.
INTEGRATED CIRCUITS DIVISION
www.ixysic.com
2R10
LCA710
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Typical values are characteristic of the device at +25°C,
and are the result of engineering evaluations. They are
provided for information purposes only, and are not part of
the manufacturing testing requirements.
Parameter Ratings Units
Blocking Voltage 60 VP
Reverse Input Voltage 5 V
Input Control Current 50 mA
Peak (10ms) 1 A
Input Power Dissipation 1150 mW
Total Power Dissipation 2800 mW
Isolation Voltage, Input to Output 3750 Vrms
Operational Temperature -40 to +85 °C
Storage Temperature -40 to +125 °C
1 Derate linearly 1.33 mW / ºC
2 Derate linearly 6.67 mW / ºC
Absolute Maximum Ratings @ 25ºC
Parameter Conditions Symbol Min Typ Max Units
Output Characteristics
Load Current, Continuous
AC/DC Configuration -I
L-- 1A
rms / ADC
DC Configuration 1.8 ADC
Peak Load Current t<10ms ILPK --±5A
P
On-Resistance
AC/DC Configuration IL=1A RON
- 0.3 0.5
DC Configuration IL=1.8A - 0.1 0.15
Off-State Leakage Current VL=60VPILEAK -- 1A
Switching Speeds
Turn-On IF=10mA, VL=10V ton - - 2.5 ms
Turn-Off toff - - 0.25
Output Capacitance IF=0mA, VL=0V, f=1MHz - - 105 - pF
Input Characteristics
Input Control Current to Activate IL=1A IF- - 10 mA
Input Control Current to Deactivate - IF0.4 0.7 - mA
Input Voltage Drop IF=10mA VF0.9 1.35 1.56 V
Reverse Input Current VR=5V IR--10A
Common Characteristics
Input to Output Capacitance VIO=0V, f=1MHz CIO -3 -pF
Electrical Characteristics @ 25ºC
INTEGRATED CIRCUITS DIVISION
LCA710
www.ixysic.com 3
R10
35
30
25
20
15
10
5
0
1.17 1.19 1.21 1.23 1.25
LED Forward Voltage (V)
Device Count (N)
Typical LED Forward Voltage Drop
(N=50, IF=10mA)
0.27 0.33 0.390.24 0.30 0.36
Turn-On Time (ms)
Device Count (N)
25
20
15
10
5
0
Typical Turn-On Time
(N=50, IF=10mA, IL=1ADC)
0.083 0.093 0.1030.078 0.088 0.098
Turn-Off Time (ms)
Device Count (N)
25
20
15
10
5
0
Typical Turn-Off Time
(N=50, IF=10mA, IL=1ADC)
0.90 1.00 1.100.95 1.05 1.15
LED Current (mA)
Device Count (N)
25
20
15
10
5
0
Typical IF for Switch Operation
(N=50, IL=1ADC)
25
20
15
10
5
0
0.90 1.00 1.100.95 1.05 1.15
LED Current (mA)
Device Count (N)
Typical IF for Switch Dropout
(N=50, IL=1ADC)
35
30
25
20
15
10
5
0
0.215 0.197 0.199 0.2030.201 0.205
On-Resistance (:)
Device Count (N)
Typical On-Resistance Distribution
(N=50, IF=10mA, IL=1ADC)
35
30
25
20
15
10
5
0
72 74 76 78 80 82
Blocking Voltage (VP)
Device Count (N)
Typical Blocking Voltage Distribution
(N=50)
LED Forward Current (mA)
Turn-Off Time (ms)
05 1015202530354045
0.09
0.08
0.07
0.06
0.05
0.04
0.03
0.02
0.01
0
50
Typical Turn-Off Time
vs. LED Forward Current
(IL=1ADC)
Temperature (ºC)
LED Forward Voltage Drop (V)
1.8
1.6
1.4
1.2
1.0
0.8
-40 -20 0 20 40 60 80 120100
I
F
=50mA
I
F
=30mA
I
F
=20mA
I
F
=10mA
Typical LED Forward Voltage Drop
vs. Temperature
Forward Current (mA)
Turn-On Time (ms)
05 1015202530354045
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
50
Typical Turn-On Time
vs. LED Forward Current
(IL=1ADC)
PERFORMANCE DATA*
*Unless otherwise noted, data presented in these graphs is typical of device operation at 25ºC.
For guaranteed parameters not indicated in the written specifications, please contact our application department.
INTEGRATED CIRCUITS DIVISION
www.ixysic.com
4R10
LCA710
IF=5mA
Turn-On Time (ms)
-40
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
-20 0 20 40 60 80 100
IF=10mA
Temperature (ºC)
Typical Turn-On Time
vs. Temperature
(IL=1ADC)
Turn-Off Time (ms)
-40
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0
-20 0 20 40 60 80 100
IF=10mA
IF=5mA
Temperature (ºC)
Typical Turn-Off Time
vs. Temperature
(IL=1ADC)
Temperature (ºC)
LED Current (mA)
-40
1.01
1.00
0.99
0.98
0.97
0.96
0.95
0.94
0.93
0.92
0.91
-20 0 20 40 60 80 100
Typical IF for Switch Operation
vs. Temperature
(IL=1ADC)
Temperature (ºC)
On-Resistance (:)
-40
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0
-20 0 20 40 60 80 100
Typical On-Resistance
vs. Temperature
(IF=10mA, IL=1ADC)
Load Voltage (V)
Load Current (mA)
1000
800
600
400
200
0
-200
-400
-600
-800
-1000
-0.3 -0.2 -0.1 0.1 0.2
00.3
Typical Load Current
vs. Load Voltage
(IF=10mA)
Load Current (mA)
Temperature (ºC)
1400
1200
1000
800
600
400
200
0
-40 -20 0 20 40 60 80 120100
I
F
=10mA
I
F
=5mA
Maximum Load Current
vs. Temperature
Temperature (ºC)
Blocking Voltage (VP)
-40
81.0
80.0
79.0
78.0
77.0
76.0
75.0
74.0
73.0
-20 0 20 40 60 80 100
Typical Blocking Voltage
vs. Temperature
Temperature (ºC)
Leakage (PA)
-40
0.019
0.018
0.017
0.016
0.015
0.014
0.013
0.012
-20 0 20 40 60 80 100
Typical Leakage vs. Temperature
Measured Across Pins 4&6
Time
Load Current (A)
8
7
6
5
4
3
2
1
0
10Ps 1ms 100ms 10s100Ps 10ms 1s 100s
Energy Rating Curve
PERFORMANCE DATA*
*Unless otherwise noted, data presented in these graphs is typical of device operation at 25ºC.
For guaranteed parameters not indicated in the written specifications, please contact our application department.
INTEGRATED CIRCUITS DIVISION
LCA710
www.ixysic.com 5
R10
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits classifies its plastic encapsulated devices for moisture sensitivity according to the latest version of
the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of
our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices
when handled according to the limitations and information in that standard as well as to any limitations set forth in the
information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) classification as shown below, and should be handled
according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device Moisture Sensitivity Level (MSL) Classifi cation
LCA710 / LCA710R / LCA710S MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Soldering Profile
Provided in the table below is the Classification Temperature (TC) of this product and the maximum dwell time the
body temperature of this device may be (TC - 5)ºC or greater. The classification temperature sets the Maximum
Body Temperature allowed for this device during lead-free reflow processes. For through-hole devices, and any other
processes, the guidelines of J-STD-020 must be observed.
Device Classifi cation Temperature (Tc) Dwell Time (tp) Max Refl ow Cycles
LCA710 250ºC 30 seconds 1
LCA710R, LCA710S 250ºC 30 seconds 3
Board Wash
IXYS Integrated Circuits recommends the use of no-clean flux formulations. Board washing to reduce or remove flux
residue following the solder reflow process is acceptable provided proper precautions are taken to prevent damage
to the device. These precautions include, but are not limited to: using a low pressure wash and providing a follow
up bake cycle sufficient to remove any moisture trapped within the device due to the washing process. Due to the
variability of the wash parameters used to clean the board, determination of the bake temperature and duration
necessary to remove the moisture trapped within the package is the responsibility of the user (assembler). Cleaning
or drying methods that employ ultrasonic energy may damage the device and should not be used. Additionally, the
device must not be exposed to flux or solvents that are Chlorine- or Fluorine-based.
INTEGRATED CIRCUITS DIVISION
www.ixysic.com
6R10
LCA710
MECHANICAL DIMENSIONS
Dimensions
mm
(inches)
PCB Hole Pattern
6.350 ± 0.127
(0.250 ± 0.005)
2.540 ± 0.127
(0.100 ± 0.005)
7.620 ± 0.127
(0.300 ± 0.005)
5.080 ± 0.127
(0.200 ± 0.005)
6 - 0.800 DIA.
(6 - 0.031 DIA.)
0.254 ± 0.0127
(0.010 ± 0.0005)
9.144 ± 0.508
(0.360 ± 0.020)
7.239 TYP
(0.285 TYP)
7.620 ± 0.254
(0.300 ± 0.010)
3.302 ± 0.051
(0.130 ± 0.002) 4.064 TYP
(0.160 TYP)
0.457 ± 0.076
(0.018 ± 0.003)
8.382 ± 0.381
(0.330 ± 0.015) 2.54 ± 0.127
(0.100 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
1.651 ± 0.254
(0.065 ± 0.010)
Pin 1
Dimensions
mm
(inches)
PCB Land Pattern
0.254 ± 0.0127
(0.010 ± 0.0005)
7.620 ± 0.254
(0.300 ± 0.010)
0.635 ± 0.127
(0.025 ± 0.005)
3.302 ± 0.051
(0.130 ± 0.002)
4.445 ± 0.254
(0.175 ± 0.010)
2.54
(0.10)
8.90
(0.3503)
1.65
(0.0649)
0.65
(0.0255)
8.382 ± 0.381
(0.330 ± 0.015) 2.54 ± 0.127
(0.100 ± 0.005)
9.524 ± 0.508
(0.375 ± 0.020) 6.350 ± 0.127
(0.250 ± 0.005)
0.457 ± 0.076
(0.018 ± 0.003)
1.651 ± 0.254
(0.065 ± 0.010)
1.651 ± 0.254
(0.065 ± 0.010)
Pin 1
LCA710
LCA710S
LCA710R
Dimensions
mm
(inches)
PCB Land Pattern
8.382 ± 0.381
(0.330 ± 0.015) 2.54 ± 0.127
(0.100 ± 0.005)
9.525 ± 0.254
(0.375 ± 0.010) 6.350 ± 0.127
(0.250 ± 0.005)
1.523 ± 0.051
(0.060 ± 0.002)
1.651 ± 0.254
(0.065 ± 0.010)
0.254 ± 0.0127
(0.010 ± 0.0005)
7.620 ± 0.254
(0.300 ± 0.010)
0.635 ± 0.127
(0.025 ± 0.005)
3.302 ± 0.051
(0.130 ± 0.002) 0.178 ± 0.076
(0.007 ± 0.003)
2.54
(0.10)
8.90
(0.3503)
1.65
(0.0649)
1.70
(0.061)
Pin 1
INTEGRATED CIRCUITS DIVISION
Specification: DS-LCA710-R10
©Copyright 2018, IXYS Integrated Circuits
OptoMOS® is a registered trademark of IXYS Integrated Circuits
All rights reserved. Printed in USA.
6/26/2018
For additional information please visit our website at: www.ixysic.com
7
LCA710
IXYS Integrated Circuits makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes
to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits'
Standard Terms and Conditions of Sale, IXYS Integrated Circuits assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but
not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits' product may result in direct physical harm, injury, or death to a person or severe property
or environmental damage. IXYS Integrated Circuits reserves the right to discontinue or make changes to its products at any time without notice.
NOTES:
1. All dimensions carry tolerances of EIA Standard 481-2
2. The tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2
Dimensions
mm
(inches)
Embossment
Embossed
Carrier
330.2 Dia
(13.00 Dia)
Top Cover
Tape Thickness
0.102 Max
(0.004 Max)
W=16.00
(0.63)
B0 = 10.10
(0.398)
A0 = 10.10
(0.398)
P1 = 12.00
(0.472)
K1 = 3.80
(0.15)
K0 = 4.90
(0.19)
User Direction of Feed
LCA710RTR & LCA710STR Tape & Reel