Rev: 1.02 3/2002 1/15 © 2001, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS74116ATP/J/X
256K x 16
4Mb Asynchronous SRAM
6, 7, 8, 10, 12 ns
3.3 V VDD
Center VDD and VSS
SOJ, TSOP, FP-BGA
Commercial Temp
Industrial Temp
Features
• Fast access time: 6, 7, 8, 10, 12 ns
• CMOS low power operation: 170/150/130/105/95 mA at
minimum cycle time
• Single 3.3 V power supply
• All inputs and outputs are TTL-compatible
• Byte control
• Fully static operation
• Industrial Temperature Option: –40° to 85°C
• Package line up
J: 400 mil, 44-pin SOJ package
TP: 400 mil, 44-pin TSOP Type II package
X: 6 mm x 10 mm Fine Pitch Ball Grid Array
package
Description
The GS74116A is a high speed CMOS Static RAM organized
as 262,144 words by 16 bits. Static design eliminates the need
for external clocks or timing strobes. The GS operates on a
single 3.3 V power supply and all inputs and outputs are TTL-
compatible. The GS74116A is available in a 6 x 10 mm Fine
Pitch BGA package, 400 mil SOJ and 400 mil TSOP Type-II
packages.
Pin Descriptions
SOJ 256K x 16-Pin Configuration (Package J)
FP-BGA 256K x 16 Bump Configuration (Package X)
6 x 10 mm Bump Pitch
Symbol Description
A0–A17 Address input
DQ1–DQ16 Data input/output
CE Chip enable input
LB Lower byte enable input
(DQ1 to DQ8)
UB Upper byte enable input
(DQ9 to DQ16)
WE Write enable input
OE Output enable input
VDD +3.3 V power supply
VSS Ground
NC No connect
1 2 3 4 5 6
ALB OE A0A1A2NC
BDQ16 UB A3A4CE DQ1
CDQ14 DQ15 A5A6DQ2DQ3
DVSS DQ13 A17 A7DQ4VDD
E VDD DQ12 NC A16 DQ5VSS
FDQ11 DQ10 A8A9DQ7DQ6
GDQ9NC A10 A11 WE DQ8
HNC A12 A13 A14 A15 NC
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
A4
A3
A2
A1
A0
CE
DQ1
DQ2
DQ3
DQ4
VDD
VSS
DQ5
DQ6
DQ7
DQ8
WE
A15
A14
A13
A5
A6
A7
OE
UB
LB
DQ16
DQ15
DQ14
DQ13
VSS
VDD
DQ12
DQ11
DQ10
DQ9
NC
A8
A9
A10
Top view
21
22
24
23
A12 A11
44-pin
SOJ
A17A16
Rev: 1.02 3/2002 2/15 © 2001, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS74116ATP/J/X
Top View
TSOP-II 256K x 16 Pin Configuration (Package TP)
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
A4
A3
A2
A1
A0
CE
DQ1
DQ2
DQ3
DQ4
VDD
VSS
DQ5
DQ6
DQ7
DQ8
WE
A15
A14
A13
A5
A6
A7
OE
UB
LB
DQ16
DQ15
DQ14
DQ13
VSS
VDD
DQ12
DQ11
DQ10
DQ9
NC
A8
A9
A10
Top view
21
22
24
23
A12 A11
44 pin
TSOP II
A17A16
Memory Array
Row
Decoder
Column
Decoder
Address
Input
Buffer
Control I/O Buffer
A0
CE
WE
OE
DQ1
A17
Block Diagram
DQ16
UB _____
LB _____
Rev: 1.02 3/2002 3/15 © 2001, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS74116ATP/J/X
Note: X: “H” or “L”
Note:
Permanent device damage may occur if Absolute Maximum Ratings are exceeded. Functional operation shall be restricted to Rec-
ommended Operating Conditions. Exposure to higher than recommended voltages for extended periods of time could affect device
reliability.
Truth Table
CE OE WE LB UB DQ1 to DQ8DQ9 to DQ16 VDD Current
HXXXX Not Selected Not Selected ISB1, ISB2
L L H
L L Read Read
IDD
LHRead High Z
HLHigh Z Read
LXL
L L Write Write
LHWrite Not Write, High Z
HLNot Write, High Z Write
LH H X X High Z High Z
LX X H H High Z High Z
Absolute Maximum Ratings
Parameter Symbol Rating Unit
Supply Voltage VDD –0.5 to +4.6 V
Input Voltage VIN –0.5 to VDD +0.5
(£ 4.6 V max.) V
Output Voltage VOUT –0.5 to VDD +0.5
(£ 4.6 V max.) V
Allowable power dissipation PD 0.7 W
Storage temperature TSTG –55 to 150 oC
Rev: 1.02 3/2002 4/15 © 2001, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS74116ATP/J/X
Note:
1. Input overshoot voltage should be less than VDD +2 V and not exceed 20 ns.
2. Input undershoot voltage should be greater than –2 V and not exceed 20 ns.
Notes:
1. Tested at TA = 25°C, f = 1 MHz
2. These parameters are sampled and are not 100% tested.
Recommended Operating Conditions
Parameter Symbol Min Typ Max Unit
Supply Voltage for -7/-8/-10/-12 VDD 3.0 3.3 3.6 V
Supply Voltage for -6VDD 3.135 3.3 3.6 V
Input High Voltage VIH 2.0 —VDD +0.3 V
Input Low Voltage VIL –0.3 —0.8 V
Ambient Temperature,
Commercial Range TAc 0—70 oC
Ambient Temperature,
Industrial Range TAI–40 —85 oC
Capacitance
Parameter Symbol Test Condition Max Unit
Input Capacitance CIN VIN = 0 V 5pF
Output Capacitance COUT VOUT = 0 V 7pF
DC I/O Pin Characteristics
Parameter Symbol Test Conditions Min Max
Input Leakage
Current IIL VIN = 0 to VDD – 1 uA 1 uA
Output Leakage
Current ILO Output High Z
VOUT = 0 to VDD –1 uA 1 uA
Output High Voltage VOH IOH = –4 mA 2.4 —
Output Low Voltage VOL ILO = +4 mA —0.4 V
Rev: 1.02 3/2002 5/15 © 2001, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS74116ATP/J/X
AC Test Conditions
Power Supply Currents
Parameter Symbol Test Conditions 0 to 70°C –40 to 85°C Unit
6 ns 7 ns 8 ns 10 ns 12 ns 6 ns 7 ns 8 ns 10 ns 12 ns
Operating
Supply
Current IDD
CE £ VIL
All other inputs
Š VIH or £ VIL
Min. cycle time
IOUT = 0 mA
170 150 130 105 90 180 160 140 115 100 mA
Standby
Current ISB1
CE Š VIH
All other inputs
Š VIH or £VIL
Min. cycle time
40 40 30 25 25 50 50 40 35 35 mA
Standby
Current ISB2
CE Š VDD - 0.2V
All other inputs
Š VDD - 0.2V or £ 0.2V 10 20 mA
DQ
VT = 1.4 V
50W30pF1
DQ
3.3 V
Output Load 1
Output Load 2
589W
434W
5pF1
Note:
1. Include scope and jig capacitance.
2. Test conditions as specified with output loading as shown in Fig. 1
unless otherwise noted.
3. Output load 2 for tLZ, tHZ, tOLZ and tOHZ
Parameter Conditions
Input high level VIH = 2.4 V
Input low level VIL = 0.4 V
Input rise time tr = 1 V/ns
Input fall time tf = 1 V/ns
Input reference level 1.4 V
Output reference level 1.4 V
Output load Fig. 1& 2
Rev: 1.02 3/2002 6/15 © 2001, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS74116ATP/J/X
AC Characteristics
* These parameters are sampled and are not 100% tested.
Read Cycle 1: CE = OE = VIL, WE = VIH, UB and, or LB = VIL
Read Cycle
Parameter Symbol -6 -7 -8 -10 -12 Unit
Min Max Min Max Min Max Min Max Min Max
Read cycle time tRC 6—7—8—10 —12 —ns
Address access time tAA —6—7—8—10 —12 ns
Chip enable access time (CE)tAC —6—7—8—10 —12 ns
Byte enable access time (UB, LB)tAB —3—3—3.5 —4—5ns
Output enable to output valid (OE)tOE —3—3—3.5 —4—5ns
Output hold from address change tOH 3—3—3—3—3—ns
Chip enable to output in low Z (CE)tLZ*3—3—3—3—3—ns
Output enable to output in low Z (OE)tOLZ*0—0—0—0—0—ns
Byte enable to output in low Z (UB, LB)tBLZ*0—0—0—0—0—ns
Chip disable to output in High Z (CE)tHZ*—3—3.5 —4—5—6ns
Output disable to output in High Z (OE)tOHZ*—3—3—3.5 —4—5ns
Byte disable to output in High Z (UB, LB)tBHZ*—3—3—3.5 —4—5ns
tAA
tOH
tRC
Address
Data Out Previous Data Data valid
Rev: 1.02 3/2002 7/15 © 2001, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS74116ATP/J/X
Read Cycle 2: WE = VIH
* These parameters are sampled and are not 100% tested.
Write Cycle
Parameter Symbol -6 -7 -8 -10 -12 Unit
Min Max Min Max Min Max Min Max Min Max
Write cycle time tWC 6—7—8—10 —12 —ns
Address valid to end of write tAW 5—5—5.5 —7—8—ns
Chip enable to end of write tCW 5—5—5.5 —7—8—ns
Byte enable to end of write tBW 5—5—5.5 —7—8—ns
Data set up time tDW 3—3.5 —4—4.5 —6—ns
Data hold time tDH 0—0—0—0—0—ns
Write pulse width tWP 5—5—5.5 —7—8—ns
Address set up time tAS 0—0—0—0—0—ns
Write recovery time (WE)tWR 0—0—0—0—0—ns
Write recovery time (CE)tWR1 0—0—0—0—0—ns
Output Low Z from end of write tWLZ*3—3—3—3—3—ns
Write to output in High Z tWHZ*—3—3—3.5 —4—5ns
tAA
tRC
Address
tAC
tLZ
tAB
tBLZ
tOE
tOLZ
CE
UB, LB
OE
Data Out
tHZ
tBHZ
tOHZ
Data valid
High impedance
Rev: 1.02 3/2002 8/15 © 2001, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS74116ATP/J/X
Write Cycle 1: WE control
Write Cycle 2: CE control
tWC
Address
CE
UB, LB
WE
Data In
OE
Data Out
tAW
tCW
tBW
tAS tWP
tWR
tDW tDH
tWLZtWHZ
Data valid
High impedance
tWC
Address
CE
UB, LB
WE
Data In
OE
Data Out
tAW
tWP
tAS tCW
tWR1
tDW tDH
Data valid
High impedance
tBW
Rev: 1.02 3/2002 9/15 © 2001, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS74116ATP/J/X
Write Cycle 3: UB, LB control
tWC
Address
CE
UB, LB
WE
Data In
OE
Data Out
tAW
tWP
tAS tCW
tWR1
tDW tDH
Data valid
High impedance
tBW
Rev: 1.02 3/2002 10/15 © 2001, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS74116ATP/J/X
44-Pin, 400 mil SOJ
1 22
2344
e
B1
D
A1 A2
y
E
HE
Q
c
L
GE
Detail A
A
B
A
Notes:
1. Dimension D& E do not include interlead flash
2. Dimension B1 does not include dambar protrusion / intrusion
3. Controlling dimension: inches
Symbol Dimension in inch Dimension in mm
min nom max min nom max
A— — 0.148 — — 3.759
A1 0.025 — — 0.635 — —
A2 0.105 0.110 0.115 2.667 2.794 2.921
B—0.018 — — 0.457 —
B1 0.026 0.028 0.032 0.660 0.711 0.813
c—0.008 — — 0.203 —
D1.120 1.125 1.130 28.44 28.58 28.70
E0.395 0.400 0.405 10.033 10.160 10.287
e—0.05 — — 1.27 —
HE0.435 0.440 0.445 11.049 11.176 11.303
GE0.360 0.370 0.380 9.144 9.398 9.652
L0.082 0.087 0.106 2.083 2.210 2.70
y— — 0.004 — — 0.102
Q0o—7o0o—7o
Rev: 1.02 3/2002 11/15 © 2001, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS74116ATP/J/X
44-Pin, 400 mil TSOP-II
D
1 22
2344
eB
Q
A
A1 A2
y
c
Detail A
E
HE
L
L1
A
Notes:
1. Dimension D& E do not include interlead flash.
2. Dimension B does not include dambar protrusion/intrusion.
3. Controlling dimension: mm
Symbol Dimension in inch Dimension in mm
min nom max min nom max
A— — 0.047 — — 1.20
A1 0.002 — — 0.05 — —
A2 0.037 0.039 0.041 0.95 1.00 1.05
B0.01 0.014 0.018 0.25 0.35 0.45
c—0.006 — — 0.15 —
D0.721 0.725 0.729 18.31 18.41 18.51
E0.396 0.400 0.404 10.06 10.16 10.26
e—0.031 — — 0.80 —
HE0.455 0.463 0.471 11.56 11.76 11.96
L0.016 0.020 0.024 0.40 0.50 0.60
L1 —0.031 — — 0.80 —
y— — 0.004 — — 0.10
Q0o—5o0o—5o
Rev: 1.02 3/2002 12/15 © 2001, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS74116ATP/J/X
6 mm x 10 mm FP-BGA
Pin A1
Index
A1
E
Top View
Side View
D
A
aaa
Pin A1
Index
E1
Bottom View
D1
c
e
e
Solder Ballfb
Symbol Unit: mm
A1.10±0.10
A1 0.20~0.30
fbf0.30~0.40
c 0.36(TYP)
D10.0±0.05
D1 5.25
E6.0±0.05
E1 3.75
e0.75(TYP)
aaa 0.10
A B C D E F G H
1
2
3
4
5
6
Rev: 1.02 3/2002 13/15 © 2001, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS74116ATP/J/X
Ordering Information
Part Number*Package Access Time Temp. Range Status
GS74116ATP-6 400 mil TSOP-II 6 ns Commercial
GS74116ATP-7 400 mil TSOP-II 7 ns Commercial
GS74116ATP-8 400 mil TSOP-II 8 ns Commercial
GS74116ATP-10 400 mil TSOP-II 10 ns Commercial
GS74116ATP-12 400 mil TSOP-II 12 ns Commercial
GS74116ATP-6I 400 mil TSOP-II 6 ns Industrial
GS74116ATP-7I 400 mil TSOP-II 7 ns Industrial
GS74116ATP-8I 400 mil TSOP-II 8 ns Industrial
GS74116ATP-10I 400 mil TSOP-II 10 ns Industrial
GS74116ATP-12I 400 mil TSOP-II 12 ns Industrial
GS74116AJ-6 400 mil SOJ 6 ns Commercial
GS74116AJ-7 400 mil SOJ 7 ns Commercial
GS74116AJ-8 400 mil SOJ 8 ns Commercial
GS74116AJ-10 400 mil SOJ 10 ns Commercial
GS74116AJ-12 400 mil SOJ 12 ns Commercial
GS74116AJ-6I 400 mil SOJ 6 ns Industrial
GS74116AJ-7I 400 mil SOJ 7 ns Industrial
GS74116AJ-8I 400 mil SOJ 8 ns Industrial
GS74116AJ-10I 400 mil SOJ 10 ns Industrial
GS74116AJ-12I 400 mil SOJ 12 ns Industrial
GS74116AX-6 Fine Pitch BGA 6 ns Commercial
GS74116AX-7 Fine Pitch BGA 7 ns Commercial
Rev: 1.02 3/2002 14/15 © 2001, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS74116ATP/J/X
* Customers requiring delivery in Tape and Reel should add the character “T” to the end of the part number. For example:
GS74116ATP-8T
GS74116AX-8 Fine Pitch BGA 8 ns Commercial
GS74116AX-10 Fine Pitch BGA 10 ns Commercial
GS74116AX-12 Fine Pitch BGA 12 ns Commercial
GS74116AX-6I Fine Pitch BGA 6 ns Industrial
GS74116AX-7I Fine Pitch BGA 7 ns Industrial
GS74116AX-8I Fine Pitch BGA 8 ns Industrial
GS74116AX-10I Fine Pitch BGA 10 ns Industrial
GS74116AX-12I Fine Pitch BGA 12 ns Industrial
Ordering Information
Part Number*Package Access Time Temp. Range Status
Rev: 1.02 3/2002 15/15 © 2001, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS74116ATP/J/X
4Mb Asynchronous Datasheet Revision History
Rev. Code: Old;
New Types of Changes
Format or Content Page #/Revisions/Reason
74116A_r1 Format/Content • Created new datasheet
74116A_r1; 74116A_r1_01 Content
• Added 6 ns and 7 ns speed bins
• Updated power numbers
• Changed FPBGA package size from 7.2 x 11.65 mm to 6 x 10 mm
• Changed package designator from “U” to “X” for FPBGA
• Changed D3 on FPBGA pinout to A17 and E3 to NC
74116A_r1_01; 74116A_r1_02 Content • Updated Recommended Operating Conditions on page 4
• Updated Read Cycle and Write Cycle AC Characteristics tables
