Datasheet for part number CA3106E22-21SB15 Our Catalog Part Number: CA3106E22-21S-B-15 Brand: Cannon Product Category: Circular Product Line: CA Bayonet Series: CA BAYONET Product Datasheet Bayonet Shell Style Endbell Style Gender Shell Size Contact Arrangement Number of contacts Contact Type Contact Plating Contacts installed Shielding Contact Rating at +20 C (68 F) (Size 15/15S/16/16S) Contact Rating at +20 C (68 F) (Size 500/0) Contact Resistance (Size 15/15S/16/16S) Contact Resistance (Size 500/0) Operating Voltage Insulator Resistance Test Voltage Air and Creepage Paths (Min) Ambient Temperature Safety Provisions Salt Spray Resistance Mating Cycles Sep. Force per Contact (Size 15/15S/16/16S) Sep. Force per Contact (Size 500/0) Gage Coupling Torque Contact Retention (Size 15/15S/16/16S) Contact Retention (Size 500/0) Shell Material Shell Plating Insulator and Grommet Material Contact Material Harnessing Info: Contact Cross-Section Connector with bayonet coupling Plug, straight Shielded connector with endbell for shielded braids and heat shrinkable boots Socket 22 22-21 1 contact size 0, 2 contact size 16 AWG Crimp Hard silver not assembled, packed separately yes 22 A 245 A 6 m 0,2 m In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC 60364-4-41. Acc. To VG95319, part 2, test no. 5.12 and VG95210, part 32, test conditions B, standard insulator material > 1000 M 1600 Vrms 1,1 mm Standard insulator material -55/+125C (-67/257F) IP67 and IP68 (1 bar pressure after 12 hrs) acc. to DIN 40 050 500 hours salt spray resistant 500 min 1,0 N 8,5 N For infos on Gage please see catalog VG95234, part 1 Closing: 11 Nm max / Opening: 0,8 Nm min 35 N 95 N Aluminium alloy Olive drab chromate over cadmium plating (conductive) CR-Elastomere Copper alloy See assembly instruction Specifications and dimensions subject to change. Page 1 of 2 Datasheet for part number CA3106E22-21SB15 Our Catalog Part Number: CA3106E22-21S-B-15 Brand: Cannon Product Category: Circular Product Line: CA Bayonet Series: CA BAYONET Product Datasheet Harnessing Info: Insulator Diameter Wire Stripping (Size 15/15S/16/16S) Wire Stripping (Size 500/0) General Info See assembly instruction 6,2 mm 13,7 mm All tests in accordance with VG95319 and/or if applicable with VG95210 Specifications and dimensions subject to change. Page 2 of 2