D-Sub Identification Mounting details Drawing Dimensions in mm Standard Versions plated through hole Mounting height 7.3 mm D-Sub 9-37 way for front panel 4 units of width (TE) only for snap-in-clips version O 3.1 0.1 for connectors see pages 05.180 - 05.181 Low-Profile Versions Mounting height 3.6 mm 9-37 way for front panel 3 units of width (TE) 7,6 O 3.1 0.1 for connectors see pages 05.182 - 05.183 Panel cut out for front/rear mount Values are taken from the CECC 75 301-802 Front mount 9 15 25 37 50 a0.2 22.2 30.5 44.3 60.7 58.3 b0.13 25.0 33.3 47.0 63.5 61.1 Rear mount c0.2 12.3 12.3 12.3 12.3 15.1 9 15 25 37 50 a0.2 20.5 28.8 42.5 59.1 56.3 b0.13 25.0 33.3 47.0 63.5 61.1 c0.2 11.4 11.4 11.4 11.4 14.1 05 177