Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94086
Tel:408.523.8200 • Fax:408.733.1287 • email@purdyelectronics.com • www.purdyelectronics.com
6-1-99
AND190HAP
Ultra Bright LED Lamps: Type 3
Weight: 1.0 g Unit: mm
1.0 MIN
2.0±0.2
13.5±0.3 11.0±0.3
10.0±0.2
Cathode Index
26.4 MIN.
1. Anode
2. Cathode
0.5
0.5
2.54
12
AND190HAP
InGaAlP High Brightness Amber Light Emission
T-3 Package (10 mm)
Features
•New emission material (InGaAlP) amber LED
•Peak wavelength (
λ
p = 612 nm) high bright emission
•All plastic mold type, clear colorless lens
•Low drive current, (forward current = 1 to 20 mA)
•Excellent On-Off contrast ratio
•Fast response time, capable of pulse operation
•High power luminous intensity
•Suitable for Outdoor Message Signboards
Maximum Ratings (T
a
= 25°C)
Characteristics Symbol Rating Unit
Forward Current
I
F
50 mA
Re verse Voltage
V
R
5V
Power Dissipation
P
D
125 mW
Operating Temper ature Range
T
Opr
-40 to 100 °C
Storage Temper ature Range
T
Stg
-40 to 100 °C
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max
Soldering time: 5 sec. max
Soldering portion of lead: up to 1.6 mm from the body of the device
2. The lead can be formed up to 5 mm from the body of the device without forming stress.
Soldering should be performed after the lead forming.
Electro-Optical Characteristics (T
a
= 25°C)
Characteristics Symbol Test Condition Minimum Typical Maximum Unit
F orward V oltage
V
F
I
F
= 20 mA –2.1 2.8 V
Reverse Current
I
R
V
R
= 4 V ––50 µA
Luminous Intensity
I
V
I
F
= 20 mA 4,500 8,000 –mcd
Peak Emission Wavelength
l
P
I
F
= 20 mA –612 –nm
Spectral Line Half Width
∆
λ
I
F
= 20 mA –15 –nm
Dominant W av elength
λ
dI
F
= 20 mA –605 –nm
Full Viewing Angle
θ
I
V
= 1/2 Peak –6–degree