Q-SERIES Q-SERIES 12mmO O6mm Panel Panel Mounting Mounting LED LED Indicator Indicator Product Specification Distinctive Features and Specifications * * * * * * * * 12mm panel mounting LED indicator 8mm coloured diffused epoxy lens or 8mm water clear super bright LEDs Bright chrome, black chrome or satin grey bezel finish Prominent bezel style 2VDC - 220VAC (2.8 x 0.8) terminals, pins or (200mm long) wire terminations IP67 sealing option (EN60529) Supplied with fixing nut and spring washer O 12,00 0,1 PANEL CUTOUT NB: UL Recognised Component TECHNICAL Specifications Switch Voltage Operating Voltage Vop (Min to Max) 1.8 to 2.5VDC 10.8 to 13.2VDC 21.6 to 26.4VDC 25.2 to 30.8VDC 99 to 121VAC 207 to 253VAC 2VDC (No Resistor) 12VDC 24VDC 28VDC 110VAC 230VAC Operating Current |op (Typical All Types) 20mA 20mA 20mA 20mA 6mA 3mA Intensity (Typical) at |op Standard HE Red Green Yellow Blue White Bi-colour (Typical) (Red/Green) Super Bright HE Red Green Yellow Blue White Prominent Forward Voltage (all voltages) 100mcd 1.9V 50mcd 2.2V 50mcd 2.1V 500mcd 3.3V 350mcd 3.3V 80/50mcd 2.0V/2.2V Bi-colour - The colour is changed by reversing the polarity of the supply voltage. Tri-colour versions are available upon request, please consult Apem. Prominent Forward Voltage (all voltages) 2,700mcd 1.9V 4,200mcd 3.2V 1,400mcd 2.1V 1,500mcd 3.6V 550mcd 3.3V Luminous intensity will be reduced with lower operating current. Max Reverse Voltage: 5V Viewing Angle: 60 Life Expectancy: 100,000 hours Operating Temperature Range: -40 to +85C Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy. The company reserves the right to change specifications without notice. www.apem.com 7 Q-SERIES 12mmO Panel Q-SERIES Mounting LED Indicator 6mmO Panel Technical Mounting Drawings LED Indicator prominent BEZEL SOLDER LUG/FASTONS PINS WIRES 10 Note: The company reserves the right to change specifications without notice. www.apem.com 8 Q-SERIES 12mmO Panel Mounting LED Indicator Order Overview STANDARD OPTIONS The Q12 Series is available with a range of standard options, to specify your LED, simply choose one option from each column. An example is shown below. Q 12 P 1 B XX G 12 SERIES MOUNTING HOLE BEZEL STYLE TERMINALS BEZEL FINISH TYPE OF ILLUMINATION LED COLOUR VOLTAGE Q 12 = O12mm P = Prominent 1 = Solder Lug/ Fastons (2.0 x 0.8) C = Bright Chrome XX = Fixed Light R = Red 02 = 2VDC (Blank) = Unsealed B = Black Chrome G = Green 06 = 6VDC E = IP67 2 = Pins G = Satin Grey KK = Flashing Light (only up to 28VDC) Y = Yellow 12 = 12VDC B = Blue 12A = 12VAC/DC W = White 24 = 24VDC 3 = Wires YY = Bi-colour ZZ = Tri-colour 6 = Short body Pins 24A = 24VAC/DC 7 = Short body Wires SR = Super Bright Red 28 = 28VDC SG = Super Bright Green 28A = 28VAC/DC SY = Super Bright Yellow 110 = 110VAC SB = Super Bright Blue 220 = 220VAC SW = Super Bright White Example Q12P1BXXG12E O12mm, prominent bezel, solder lug terminals, black chrome finish, fixed light, green, 12volt DC LED, IP67 Panel Seal RG = Red/Green RY = Red/Yellow GY = Green/Yellow RYG = Red/Yellow/Green * Gold Faston terminal denotes Anode (+), silver terminal denotes Cathode (-) * Standard wire length is 200mm, 24AWG, red wire denotes Anode (+), black wire denotes Cathode (-) for other wire lengths consult APEM * For LEDs with alternate voltage consult APEM * Bi-colour LEDs, by connecting the gold Faston (+) one colour is produced, by reversing the supply voltage another colour is produced - Bi-colours are available up to 28VDC * Take care when soldering to the Faston terminals * Max voltage for pins and wires is 28V * Maximum panel thickness 7mm * For behind panel epoxy sealed options please consult APEM * Tri-colours are only available behind panel epoxy sealed with wires or pins * 110VAC and 220VAC only available with solder lug/Faston terminals * We recommend using Superbright LEDs for use at 220VAC * For resistorless versions (02) please pay attention to the forward voltage www.apem.com 9 E SEALING