PD-2.317 rev. C 06/99 MBR10.. Series MBRB10.. Series SCHOTTKY RECTIFIER 10 Amp Major Ratings and Characteristics Characteristics Description/Features Values Units I F(AV) Rectangular waveform 10 A I FRM @ TC = 135C 20 A VRRM 35/45 V I FSM @ tp = 5 s sine 1060 A VF @ 10 Apk, TJ = 125C 0.57 V TJ range - 65 to 150 C This Schottky rectifier has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 150 C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 150C TJ operation TO-220 and D 2Pak packages Low forward voltage drop High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance High frequency operation Guard ring for enhanced ruggedness and long term reliability Case Styles www.irf.com MBR10.. Series MBRB10.. Series TO-220AC D 2PAK 1 MBR10.. Series, MBRB10.. Series PD-2.317 rev. C 06/99 Voltage Ratings Part number VR MBR1035 / MBRB1035 MBR1045 / MBRB1045 Max. DC Reverse Voltage (V) 35 VRWM Max. Working Peak Reverse Voltage (V) 45 Absolute Maximum Ratings Values Units IF(AV) Max. Average Forward Current Parameters 10 A @ T C = 135 C, (Rated V R) IFRM Peak Repetitive Forward Current 20 A Rated V R, square wave, 20kHz T C = 135 C IFSM Non Repetitive Peak Surge Current 1060 A 150 IRRM Peak Repetitive Reverse Surge Current Conditions 5s Sine or 3s Following any rated load condition and with rated V RRM applied Rect. pulse Surge applied at rated load conditions halfwave, single phase, 60Hz 2.0 sec 1.0 KHz 1.0 A Values Units 0.84 V @ 20A 0.57 V @ 10A 0.72 V @ 20A 0.1 mA TJ = 25 C 15 mA TJ = 125 C TJ = TJ max. Electrical Specifications Parameters VFM Max. Forward Voltage Drop (1) IRM Max. Instantaneus Reverse Current (1) Conditions TJ = 25 C TJ = 125 C Rated DC voltage VF(TO) Threshold Voltage 0.354 V rt Forward Slope Resistance 17.6 m CT Max. Junction Capacitance 600 pF VR = 5VDC, (test signal range 100Khz to 1Mhz) 25C LS Typical Series Inductance 8.0 nH Measured from top of terminal to mounting plane 1000 V/ s dv/dt Max. Voltage Rate of Change (Rated VR) (1) Pulse Width < 300s, Duty Cycle <2% Thermal-Mechanical Specifications Parameters Values Units TJ Max. Junction Temperature Range -65 to 150 Tstg Max. Storage Temperature Range -65 to 175 Conditions C C RthJC Max. Thermal Resistance Junction to Case 2.0 C/W DC operation RthCS Typical Thermal Resistance Case to Heatsink 0.50 C/W Mounting surface, smooth and greased Only for TO-220 wt T 2 Approximate Weight Mounting Torque 2 (0.07) g (oz.) Min. 6 (5) Max. 12 (10) Kg-cm (Ibf-in) www.irf.com MBR10.. Series, MBRB10.. Series PD-2.317 rev. C 06/99 100 (A) Reverse Current - I R (mA) 100 125C 1 100C 75C 0.1 50C 0.01 25C 0.001 F T = 150C 0.0001 J 0 T = 125C 5 10 J 10 15 20 25 30 35 40 45 Reverse Voltage - VR (V) T = 25C Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage J T (pF) 1000 T = 25C Junction Capacitance - C Instantaneous Forward Current - I TJ = 150C 10 1 0.2 J 100 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 0 10 20 30 40 Forward Voltage Drop - V FM (V) Reverse Voltage - VR (V) Fig. 1 - Max. Forward Voltage Drop Characteristics Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage 50 Thermal Impedance Z thJC (C/W) 10 1 D= D= D= D= D= 0.75 0.50 0.33 0.25 0.20 P DM t 0.1 Single Pulse (Thermal Resistance) Notes: 1 t2 1. Duty factor D = t 1/ t 2 2. Peak TJ = PDM x Z thJC+ T C 0.01 0.00001 0.0001 0.001 0.01 0.1 1 10 100 t 1 , Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics www.irf.com 3 MBR10.. Series, MBRB10.. Series PD-2.317 rev. C 06/99 10 Average Power Loss - (Watts) Allowable Case Temperature - (C) 150 145 DC 140 135 Square wave (D = 0.50) Rated V R applied 130 125 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 8 6 RMS Limit DC 4 2 see note (2) 0 120 0 3 6 9 12 0 15 Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current 4 6 8 10 12 14 16 Fig. 6 - Forward Power Loss Characteristics 1000 Non-Repetitive Surge Current - I FSM (A) 2 Average Forward Current - I F(AV) (A) Average Forward Current - I F(AV) (A) At Any Rated Load Condition And With Rated V Applied RRM Following Surge 100 10 100 1000 10000 Square Wave Pulse Duration - t p (microsec) Fig. 7 - Max. Non-Repetitive Surge Current (2) Formula used: T C = TJ - (Pd + PdREV) x R thJC ; Pd = Forward Power Loss = I F(AV) x VFM @ (IF(AV) / D) (see Fig. 6); Pd REV = Inverse Power Loss = VR1 x I R (1 - D); IR @ VR1 = rated VR 4 www.irf.com MBR10.. Series, MBRB10.. Series PD-2.317 rev. C 06/99 Ordering Information Table Device Code MBR B 10 45 1 2 3 4 1 - Essential Part Number 2 - B = Surface Mount 3 - Current Rating 4 - Voltage code: Code = VRRM None = TO-220 35 = 35V 45 = 45V Outline Table 10.54 (0.41) 2 MAX. 1.32 (0.05) 3.78 (0.15) 1.22 (0.05) DIA. 3.54 (0.14) 2.92 (0.11) 2.54 (0.10) TERM 2 15.24 (0.60) 14.84 (0.58) 1 6.48 (0.25) 6.23 (0.24) 2 3 14.09 (0.55) 3.96 (0.16) 13.47 (0.53) 3.55 (0.14) 0.10 (0.004) 2.04 (0.080) MAX. 1.40 (0.05) 2.89 (0.11) 1.15 (0.04) 2.64 (0.10) 0.94 (0.04) 0.69 (0.03) BASE CATHODE 2 1 4.57 (0.18) 3 0.61 (0.02) MAX. 1 4.32 (0.17) CATHODE 3 ANODE 5.08 (0.20) REF. Dimensions in millimeters and inches www.irf.com 5 MBR10.. Series, MBRB10.. Series PD-2.317 rev. C 06/99 Outline Table 4.69 (0.18) 10.16 (0.40) REF. 4.20 (0.16) 1.32 (0.05) 1.22 (0.05) 6.47 (0.25) 15.49 (0.61) 93 6.18 (0.24) 14.73 (0.58) 3X 2.61 (0.10) 5.28 (0.21) 2.32 (0.09) 4.78 (0.19) 0.55 ( 0.02) 0.46 (0.02) 8.89 (0.35) REF. 1.40 (0.055) 1.14 (0.045) 2X BASE CATHODE 0.93 (0.37) MINIMUM RECOMMENDED FOOTPRINT 0.69 (0.27) 11.43 (0.45) 4 1 2 3 4.57 (0.18) 1 2 4.32 (0.17) 3 8.89 (0.35) 17.78 (0.70) 4 0.61 (0.02) MAX. ANODE CATHODE ANODE 5.08 (0.20) REF. Conform to JEDEC outline D2Pak (SMD-220) Dimensions in millimeters and (inches) 3.81 (0.15) 2.08 (0.08) 2X 2.54 (0.10) 2X Tape & Reel Information TRR 1.60 (0.0 63) 1.50 (0.0 59) 4.10 (0.161) 3.90 (0.153) FEED DIR ECTION 1.85 (0 .07 3) 1.65 (0 .06 5) 1.60 (0.063) 1.50 (0.059) DIA. 0.368 (0.014 5) 0.342 (0.013 5) 11 .60 (0.457) 11 .40 (0.449) 15.42 (0.6 09) 15.22 (0.6 01) TRL 10 .90 (0.429) 10 .70 (0.421) 1.75 (0.06 9) DIA. 1.25 (0.04 9) 16 .10 (0.6 34) 15 .90 (0.6 26) 24 .30 (0 .957) 23 .90 (0 .941) 4.72 (0.18 6) 4.52 (0.17 8) FEED DIRECTION 13 .50 (0.5 32) 12 .80 (0.5 04) DIA. 26.40 (1.0 39) 24.40 (0.9 61) SMD-220 Tape & Reel When ordering, indicate th e part 360 (1 4.173) DIA. MAX. 60 (2.36 2) DIA. MIN . numbe r, part orientation, and the quantity. Quantitie s are in multiples of 800 piece s per reel fo r bo th TRL and T RR. Dimensions in millimeters and (inches) 6 www.irf.com MBR10.. Series, MBRB10.. Series PD-2.317 rev. C 06/99 WORLD HEADQUARTERS: EUROPEAN HEADQUARTERS: IR CANADA: IR GERMANY: IR ITALY: IR FAR EAST: IR SOUTHEAST ASIA: IR TAIWAN: http://www.irf.com www.irf.com 233 Kansas St., El Segundo, California 90245 U.S.A. Tel: (310) 322 3331. Fax: (310) 322 3332. Hurst Green, Oxted, Surrey RH8 9BB, U.K. Tel: ++ 44 1883 732020. Fax: ++ 44 1883 733408. 15 Lincoln Court, Brampton, Markham, Ontario L6T3Z2. Tel: (905) 453 2200. Fax: (905) 475 8801. Saalburgstrasse 157, 61350 Bad Homburg. Tel: ++ 49 6172 96590. Fax: ++ 49 6172 965933. Via Liguria 49, 10071 Borgaro, Torino. Tel: ++ 39 11 4510111. Fax: ++ 39 11 4510220. K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo, Japan 171. Tel: 81 3 3983 0086. 1 Kim Seng Promenade, Great World City West Tower,13-11, Singapore 237994. Tel: ++ 65 838 4630. 16 Fl. Suite D.207, Sec. 2, Tun Haw South Road, Taipei, 10673, Taiwan. Tel: 886 2 2377 9936. Fax-On-Demand: +44 1883 733420 Data and specifications subject to change without notice. 7