MBR10.. Series, MBRB10.. Series
PD-2.317 rev. C 06/99
2www.irf.com
VFM Max. Forward Voltage Drop 0.84 V @ 20A TJ = 25 °C
(1) 0.57 V @ 10A
0.72 V @ 20A
IRM Max. Instantaneus Reverse Current 0.1 mA TJ = 25 °C
(1) 15 mA TJ = 125 °C
VF(TO) Threshold Voltage 0.354 V TJ = TJ max.
rtForward Slope Resistance 17.6 mΩ
CTMax. Junction Capacitance 60 0 pF VR = 5VDC, (test signal range 100Khz to 1Mhz) 25°C
LSTypical Series Inductance 8. 0 n H Measured from top of terminal to mounting plane
dv/dt Max. Voltage Rate of Change 1000 V / µ s
(Rated VR)
Thermal-Mechanical Specifications
Parameters Values Units Conditions
Kg-cm
(Ibf-in)
Electrical Specifications
(1) Pulse Width < 300µs, Duty Cycle <2%
Absolute Maximum Ratings
Part number MBR1035 / MBRB1035 MBR1045 / MBRB1045
VRMax. DC Reverse Voltage (V)
VRWM Max. Working Peak Reverse Voltage (V) 35 45
Voltage Ratings
TJMax. Junction Temperature Range -65 to 150 °C
Tstg Max. Storage Temperature Range -65 to 175 °C
RthJC Max. Thermal Resistance 2.0 °C/W DC operation
Junction to Case
RthCS Typical Thermal Resistance 0.50 °C/W Mounting surface, smooth and greased
Case to Heatsink Only for TO-220
wt Approximate Weight 2 (0.07) g (oz.)
T Mounting Torque Min. 6 (5)
Max. 12 (10)
IF(AV) Max. Average Forward Current 10 A @ TC = 135° C, (Rated VR)
IFRM Peak Repetitive Forward 20 A Rated VR, square wave, 20kHz
Current TC = 135° C
IFSM Non Repetitive Peak 1060 5µs Sine or 3µs
Surge Current Rect. pulse
Surge applied at rated load conditions halfwave,
single phase, 60Hz
IRRM Peak Repetitive Reverse 1.0 A 2.0 µsec 1.0 KHz
Surge Current
Parameters Values Units Conditions
Following any rated load condition
and with rated VRRM applied
A
150
Parameters Values Units Conditions
Rated DC voltage
TJ = 125 °C