1.5SMC Series
Vishay General Semiconductor
Document Number: 88303
Revision: 21-Oct-08
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
www.vishay.com
1
Surface Mount TRANSZORB® Transient Voltage Suppressors
FEATURES
Low profile package
Ideal for automated placement
Glass passivated chip junction
Available in uni-directional and bi-directional
1500 W peak pulse power capability with a
10/1000 µs waveform, repetitive rate (duty
cycle): 0.01 %
Excellent clamping capability
Very fast response time
Low incremental surge resistance
Meets MSL level 1, per J-STD-020, LF maximum
peak of 260 °C
Solder dip 260 °C, 40 s
Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and
lighting on ICs, MOSFET, signal lines of sensor units
for consumer, computer, industrial, automotive and
telecommunication.
MECHANICAL DATA
Case: DO-214AB (SMC)
Molding compound meets UL 94 V-0 flammability
rating
Base P/N-E3 - RoHS compliant, commercial grade
Base P/NHE3 - RoHS compliant, high reliability/
automotive grade (AEC Q101 qualified)
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3
suffix meets JESD 201 class 2 whisker test
Polarity: For uni-directional types the band denotes
cathode end, no marking on bi-directional types
DEVICES FOR BI-DIRECTION APPLICATIONS
For bi-directional devices use CA suffix (e.g.
1.5SMC220CA).
Electrical characteristics apply in both directions.
PRIMARY CHARACTERISTICS
VBR uni-directional 6.8 V to 540 V
VBR bi-directional 6.8 V to 220 V
PPPM 1500 W
PD6.5 W
IFSM (uni-directional only) 200 A
TJ max. 150 °C
DO-214AB (SMC)
Notes:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2
(2) Mounted on 0.31 x 0.31" (8.0 x 8.0 mm) copper pads to each terminal
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL VALUE UNIT
Peak power dissipation with a 10/1000 µs waveform (1)(2) (Fig. 1) PPPM 1500 W
Peak pulse current with a 10/1000 µs waveform (1) (Fig. 3) IPPM See next table A
Power dissipation on infinite heatsink TA = 50 °C PD6.5 W
Peak forward surge current 8.3 ms single half sine-wave
uni-directional only (2) IFSM 200 A
Operating junction and storage temperature range TJ, TSTG - 65 to + 150 °C
1.5SMC Series
Vishay General Semiconductor
www.vishay.com For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
Document Number: 88303
Revision: 21-Oct-08
2
Notes:
(1) Pulse test: tp 50 ms
(2) Surge current waveform per Fig. 3 and derate per Fig. 2
(3) All terms and symbols are consistent with ANSI/IEEE CA62.35
(4) For bi-directional types with VR 10 V and less, the ID limit is doubled
(5) VF = 3.5 V at IF = 100 A (uni-directional only)
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
GENERAL
SEMICONDUCTOR
PART NUMBER
DEVICE
MARKING
CODE
BREAKDOWN
VOLTAGE
V
BR
AT I
T (1)
(V)
TEST
CURRENT
I
T
(mA)
STAND-OFF
VOLTAGE
V
WM
(V)
MAXIMUM
REVERSE
LEAKAGE
AT V
WM
I
D
(4)
(µA)
MAXIMUM
PEAK
PULSE
CURRENT
I
PPM
(2)
(A)
MAXIMUM
CLAMPING
VOLTAGE
AT I
PPM
V
C
(V)
MAXIMUM
TEMP.
COEFFICIENT
OF VBR
(%/°C)
UNI BI
MIN. MAX.
1.5SMC6.8A 6V8A 6V8C 6.45 7.14 10 5.80 1000 143 10.5 0.057
1.5SMC7.5A 7V5A 7V5C 7.13 7.88 10 6.40 500 133 11.3 0.061
1.5SMC8.2A 8V2A 8V2C 7.79 8.61 10 7.02 200 124 12.1 0.065
1.5SMC9.1A 9V1A 9V1C 8.65 9.55 1.0 7.78 50 112 13.4 0.068
1.5SMC10A 10A 10C 9.50 10.5 1.0 8.55 10 103 14.5 0.073
1.5SMC11A 11A 11C 10.5 11.6 1.0 9.40 5.0 96.2 15.6 0.075
1.5SMC12A 12A 12C 11.4 12.6 1.0 10.2 5.0 89.8 16.7 0.078
1.5SMC13A 13A 13C 12.4 13.7 1.0 11.1 5.0 82.4 18.2 0.081
1.5SMC15A 15A 15C 14.3 15.8 1.0 12.8 1.0 70.8 21.2 0.084
1.5SMC16A 16A 16C 15.2 16.8 1.0 13.6 1.0 66.7 22.5 0.086
1.5SMC18A 18A 18C 17.1 18.9 1.0 15.3 1.0 59.5 25.2 0.089
1.5SMC20A 20A 20C 19.0 21.0 1.0 17.1 1.0 54.2 27.7 0.090
1.5SMC22A 22A 22C 20.9 23.1 1.0 18.8 1.0 49.0 30.6 0.092
1.5SMC24A 24A 24C 22.8 25.2 1.0 20.5 1.0 45.2 33.2 0.09
1.5SMC27A 27A 27C 25.7 28.4 1.0 23.1 1.0 40.0 37.5 0.096
1.5SMC30A 30A 30C 28.5 31.5 1.0 25.6 1.0 36.2 41.4 0.097
1.5SMC33A 33A 33C 31.4 34.7 1.0 28.2 1.0 32.8 45.7 0.098
1.5SMC36A 36A 36C 34.2 37.8 1.0 30.8 1.0 30.1 49.9 0.099
1.5SMC39A 39A 39C 37.1 41.0 1.0 33.3 1.0 27.8 53.9 0.100
1.5SMC43A 43A 43C 40.9 45.2 1.0 36.8 1.0 25.3 59.3 0.101
1.5SMC47A 47A 47C 44.7 49.4 1.0 40.2 1.0 23.1 64.8 0.101
1.5SMC51A 51A 51C 48.5 53.6 1.0 43.6 1.0 21.4 70.1 0.102
1.5SMC56A 56A 56C 53.2 58.8 1.0 47.8 1.0 19.5 77.0 0.103
1.5SMC62A 62A 62C 58.9 65.1 1.0 53.0 1.0 17.6 85.0 0.104
1.5SMC68A 68A 68C 64.6 71.4 1.0 58.1 1.0 16.3 92.0 0.104
1.5SMC75A 75A 75C 71.3 78.8 1.0 64.1 1.0 14.6 104 0.105
1.5SMC82A 82A 82C 77.9 86.1 1.0 70.1 1.0 13.3 113 0.105
1.5SMC91A 91A 91C 86.5 95.5 1.0 77.8 1.0 12.0 125 0.106
1.5SMC100A 100A 100C 95.0 105 1.0 85.5 1.0 10.9 137 0.106
1.5SMC110A 110A 110C 105 116 1.0 94.0 1.0 9.9 152 0.107
1.5SMC120A 120A 120C 114 126 1.0 102 1.0 9.1 165 0.107
1.5SMC130A 130A 130C 124 137 1.0 111 1.0 8.4 179 0.107
1.5SMC150A 150A 150C 143 158 1.0 128 1.0 7.2 207 0.106
1.5SMC160A 160A 160C 152 168 1.0 136 1.0 6.8 219 0.108
1.5SMC170A 170A 170C 162 179 1.0 145 1.0 6.4 234 0.108
1.5SMC180A 180A 180C 171 189 1.0 154 1.0 6.1 246 0.108
1.5SMC200A 200A 200C 190 210 1.0 171 1.0 5.5 274 0.108
1.5SMC220A 220A 220C 209 231 1.0 185 1.0 4.6 328 0.108
1.5SMC250A 250A - 237 263 1.0 214 1.0 4.4 344 0.110
1.5SMC300A 300A - 285 315 1.0 256 1.0 3.6 414 0.110
1.5SMC350A 350A - 333 368 1.0 300 1.0 3.1 482 0.110
1.5SMC400A 400A - 380 420 1.0 342 1.0 2.7 548 0.110
1.5SMC440A 440A - 418 462 1.0 376 1.0 2.5 602 0.110
1.5SMC480A 480A - 456 504 1.0 408 1.0 2.28 658 0.110
1.5SMC510A 510A - 485 535 1.0 434 1.0 2.15 698 0.110
1.5SMC540A 540A - 513 567 1.0 459 1.0 2.03 740 0.110
1.5SMC Series
Vishay General Semiconductor
Document Number: 88303
Revision: 21-Oct-08
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
www.vishay.com
3
Note:
(1) Mounted on minimum recommended pad layout
Note:
(1) Automotive grade AEC Q101 qualified
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL VALUE UNIT
Thermal resistance, junction to ambient air (1) RθJA 75 °C/W
Thermal resistance, junction to leads RθJL 15 °C/W
ORDERING INFORMATION (Example)
PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE
1.5SMC6.8A-E3/57T 0.211 57T 850 7" diameter plastic tape and reel
1.5SMC6.8A-E3/9AT 0.211 9AT 3500 13" diameter plastic tape and reel
1.5SMC6.8AHE3/57T (1) 0.211 57T 850 7" diameter plastic tape and reel
1.5SMC6.8AHE3/9AT (1) 0.211 9AT 3500 13" diameter plastic tape and reel
Figure 1. Peak Pulse Power Rating Curve
Figure 2. Pulse Power or Current vs. Initial Junction Temperature
0.1
1
10
100
0.31 x 0.31" (8.0 x 8.0 mm)
Copper Pad Areas
0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms
P
PPM
- Peak Pulse Power (kW)
td - Pulse Width (s)
0 25 50 75 100
100
75
50
25
0
125 150 175 200
TJ - Initial Temperature (°C)
Peak Pulse Power (PPP) or Current (IPP)
Derating in Percentage, %
Figure 3. Pulse Waveform
Figure 4. Typical Junction Capacitance Uni-Directional
0
50
100
150
t
r
= 10 µs
Peak Value
IPPM
Half Value -
IPPM
I
PP
2
t
d
10/1000 µs Waveform
as defined by R.E.A.
01.0 2.0 3.0 4.0
t - Time (ms)
I
PPM
- Peak Pulse Current, % I
RSM
T
J
= 25 °C
Pulse Width (t
d
)
is defined as the Point
where the Peak Current
decays to 50 % of I
PPM
10
100
1000
10 000
20 000
101 100 400
Uni-Directional
Bi-Directional
T
J
= 25 °C
f = 1.0 MHz
V
sig
= 50 mVp-p
Measured at
Zero Bias
V
R
, Measured
at Stand-Off
Voltage V
WM
C
J
- Junction Capacitance (pF)
VWM - Reverse Stand-Off Voltage (V)
1.5SMC Series
Vishay General Semiconductor
www.vishay.com For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
Document Number: 88303
Revision: 21-Oct-08
4
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
Figure 5. Typical Transient Thermal Impedance
0.1
1.0
10
100
0.001 0.01 0.1 100 10 1 1000
tp - Pulse Duration (s)
Transient Thermal Impedance (°C/W)
Figure 6. Maximum Non-Repetitive Forward Surge Current
Uni-Directional Use Only
1
10
100
10
100
200
TJ = TJ max.
8.3 ms Single Half Sine-Wave
Number of Cycles at 60 Hz
Peak Forward Surge Current (A)
0.260 (6.60)
0.280 (7.11)
0.006 (0.152)
0.012 (0.305)
0.030 (0.76)
0.060 (1.52)
0.008 (0.2)
0.305 (7.75)
0.320 (8.13)
0.220 (5.59)
0.246 (6.22)
0.079 (2.06)
0.103 (2.62)
0.114 (2.90)
0.126 (3.20)
Cathode Band
DO-214AB (SMC)
0.320 REF.
Mounting Pad Layout
0 (0)
0.185 (4.69)
MAX.
0.126 (3.20)
MIN.
0.060 (1.52)
MIN.
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.