49% (R) PCM1723 PCM 172 FPO 3E Stereo Audio DIGITAL-TO-ANALOG CONVERTER WITH PROGRAMMABLE PLL TM FEATURES DESCRIPTION ACCEPTS 16-, 20-, OR 24-BIT INPUT DATA The PCM1723 is a complete low cost stereo audio digital-to-analog converter (DAC) with a phase-locked loop (PLL) circuit included. The PLL derives either 256fS or 384fS system clock from an external 27MHz reference frequency. The DAC contains a 3rd-order modulator, a digital interpolation filter, and an analog output amplifier. The PCM1723 can accept 16-, 20-, or 24-bit input data in either normal or I2S formats. COMPLETE STEREO DAC: Includes Digital Filter and Output Amp DYNAMIC RANGE: 94dB MULTIPLE SAMPLING FREQUENCIES: 16kHz, 22.05kHz, 24kHz 32kHz, 44.1kHz, 48kHz 64kHz, 88.2kHz, 96kHz The digital filter performs an 8X interpolation function and includes selectable features such as soft mute, digital attenuation and digital de-emphasis. The PLL can be programmed for sampling at standard digital audio frequencies as well as one-half and double sampling frequencies. PROGRAMMABLE PLL CIRCUIT: 256fS/384fS from 27MHz Master Clock NORMAL OR I2S DATA INPUT FORMATS SELECTABLE FUNCTIONS: Soft Mute Digital Attenuator (256 Steps) Digital De-emphasis The PCM1723 is ideal for applications which combine compressed audio and video data such as DVD, DVDROM, set-top boxes and MPEG sound cards. OUTPUT MODE: Left, Right, Mono, Mute BCKIN LRCIN DIN Serial Input I/F 8X Oversampling Digital Filter with Function Controller ML Multi-level Delta-Sigma Modulator Low-pass Filter DAC VOUTL CAP Multi-level Delta-Sigma Modulator Low-pass Filter DAC VOUTR MC MD Mode Control I/F ZERO BPZ-Cont. 256fS/384fS Open Drain RSTB PLL SCKO OSC MCKO XTI XTO Power Supply VCP PGND VCC AGND VDD DGND International Airport Industrial Park * Mailing Address: PO Box 11400, Tucson, AZ 85734 * Street Address: 6730 S. Tucson Blvd., Tucson, AZ 85706 * Tel: (520) 746-1111 * Twx: 910-952-1111 Internet: http://www.burr-brown.com/ * FAXLine: (800) 548-6133 (US/Canada Only) * Cable: BBRCORP * Telex: 066-6491 * FAX: (520) 889-1510 * Immediate Product Info: (800) 548-6132 (c) 1996 Burr-Brown Corporation SBAS057 PDS-1344B Printed in U.S.A. January, 1998 SPECIFICATIONS All specifications at +25C, +VCC = +VDD = +VCP = +5V, fS = 44.1kHz, and 16-bit input data, SYSCLK = 384fS, unless otherwise noted. PCM1723 PARAMETER CONDITIONS RESOLUTION DATA FORMAT Audio Data Interface Format Data Bit Length Audio Data Format Sampling Frequency (fS) PLL PERFORMANCE Master Clock Input Frequency(4) Master Clock Output Frequency Generated Sysclk Frequency Output Logic Level VOH (MCKO, SCKO) VOL Generated Sysclk Jitter Generated Sysclk Transient(1) Power-Up Time Generated Sysclk Duty Cycle MIN THD+N at -60dB Dynamic Range (EIAJ Method) Signal-to-Noise Ratio(3) (EIAJ Method) Channel Separation DC ACCURACY Gain Error Gain Mismatch, Channel-to-Channel Bipolar Zero Error ANALOG OUTPUT Output Voltage Center Voltage Load Impedance MSB 32 16 64 Standard fS One-half fS Double fS Standard/I2S 16/20/24 Selectable First, Binary Two's Complement 44.1 48 22.05 24 88.2 96 26.73 4.096 POWER SUPPLY REQUIREMENTS Voltage Range Supply Current: ICC + IDD + ICP UNITS 27 27.27 36.864 Selectable kHz kHz kHz MHz MHz 256fS/384fS IOH = 2mA IOL = 4mA Standard Dev fM = 27MHz To Programmed Frequency fM = 27MHz, CL = 15pF VDD - 0.4 0.5 150 40 15 50 20 30 60 VDC VDC ps ms ms % TTL fs = 44.1kHz fs = 96kHz fs = 44.1kHz fs = 96kHz fs = 44.1kHz fs = 96kHz fs = 44.1kHz fs = 96kHz fs = 44.1kHz 90 90 88 VOUT = VCC/2 at BPZ Full Scale (-0dB) AC Load -89 -87 -31 -29 94 91 96 95 93 -80 dB dB dB dB dB dB dB dB dB 1.0 1.0 30 3.0 2.0 % of FSR % of FSR mV Vp-p VDC k 0.62 x VCC VCC/2 5 DIGITAL FILTER PERFORMANCE Passband Stopband Passband Ripple Stopband Attenuation Delay Time De-emphasis Error INTERNAL ANALOG FILTER -3dB Bandwidth Passband Response MAX Bits DIGITAL INPUT LOGIC LEVEL DYNAMIC PERFORMANCE(2) THD+N at fS (0dB) TYP 16 0.445 0.555 0.17 -35 11.125/fS -0.2 +0.55 100 -0.16 f = 20kHz VCC = VDD = VCP fS = 44.1kHz TEMPERATURE RANGE Operation Storage 4.5 -25 -55 5 20 fS fS dB dB sec dB kHz dB 5.5 24 VDC mA +85 +100 C C NOTES: (1) Sysclk transient is the maximum frequency lock time when the PLL frequency is changed. (2) Dynamic performance specs are tested with 20kHz low pass filter and THD+N specs are tested with 30kHz LPF, 400Hz HPF, Average-Mode. (3) SNR is tested at Infinite Zero Detection off. (4) PLL evaluations tested with 1ns maximum jitter on the 27MHz input clock. (R) PCM1723 2 PIN CONFIGURATION PIN ASSIGNMENTS TOP VIEW SSOP XTI 1 24 XTO SCKO 2 23 PGND VCP 3 22 DGND NC 4 21 VDD PIN NAME TYPE XTI IN 2 SCKO OUT System Clock Out. This output is 256fS or 384fS. system clock generated by the internal PLL. PLL Power Supply (+5V). 3 VCP PWR NC N/A No connection. 5 MCKO Out Buffered clock output of crystal oscillator. 6(1) ML IN Latch for serial control data. 7(1) MC IN Clock for serial control data. 8(1) MD IN Data for serial control. 9(1) RSTB IN Reset Input. When this pin is low, the digital filters and modulators are held in reset. 10 ZERO OUT Zero Data Flag. This pin is low when the input data is continuously zero for more than 65, 535 cycles of BCKIN. 11 VOUTR OUT Right Channel Analog Output. 12 AGND GND Analog Ground. Analog Power Supply (+5V). 5 20 RES ML 6 19 NC MC 7 18 LRCIN MD 8 17 DIN RSTB 9 16 BCKIN ZERO 10 15 CAP 13 VCC PWR VOUTR 11 14 VOUTL 14 VOUTL OUT AGND 12 13 VCC 15 CAP PRODUCT PACKAGE PACKAGE DRAWING NUMBER(1) PCM1723E 24-Pin SSOP 338 Master Clock Input. 4 MCKO PACKAGE INFORMATION FUNCTION 1 Left Channel Analog Output. Common pin for analog output amplifiers. 16(2) BCKIN IN 17(2) DIN IN Serial audio data input. 18(2) LRCIN IN Left/Right Word Clock. Frequency is equal to fS. Bit clock for clocking in the audio data. 19 NC N/A No connection. 20 RES N/A Reserved for factory use, do not connect. 21 VDD PWR Analog Power Supply (+5V). 22 DGND GND Digital Ground. 23 PGND GND 24 XTO Out PLL Ground. Crystal oscillator output. Note: (1) Schmitt triger input with internal pull-up resistors. (2) Schmitt triger input. NOTE: (1) For detailed drawing and dimension table, please see end of data sheet, or Appendix C of Burr-Brown IC Data Book. ABSOLUTE MAXIMUM RATINGS Power Supply Voltage ....................................................................... +6.5V +VCC to +VDD Difference ................................................................... 0.1V Input Logic Voltage .................................................. -0.3V to (VDD + 0.3V) Input Current (except power supply) ............................................... 10mA Power Dissipation .......................................................................... 530mW Operating Temperature Range ......................................... -25C to +85C Storage Temperature ...................................................... -55C to +125C Lead Temperature (soldering, 5s) .................................................. +260C Thermal Resistance, JA ....................................................................................... +70C/W The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes no responsibility for the use of this information, and all use of such information shall be entirely at the user's own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant any BURR-BROWN product for use in life support devices and/or systems. (R) 3 PCM1723 TYPICAL PERFORMANCE CURVES At TA = +25C, VCC = VDD = VCP = +5V, fS = 44.1kHz, 16-bit input data, 384fS, unless otherwise noted. Measurement bandwidth is 20kHz. DYNAMIC PERFORMANCE THD+N (0dB) vs TEMPERATURE and VCC = 5V, 384fS THD+N (0dB) vs POWER SUPPLY VOLTAGE TA = 25C, 384fS -70 -70 -75 fS = 96k THD+N (dB) THD+N (dB) -75 -80 -85 fS = 44.1k -90 fS = 96k -80 -85 fS = 44.1k -90 -95 -95 -25 0 25 50 75 85 4.5 5.0 5.5 Temperature (C) Power Supply Voltage (V) THD+N (0dB) vs SAMPLING RATE (fS) VCC = 5V, TA = 25C POWER SUPPLY CURRENT vs SAMPLING RATE (fS) VCC = 5V, TA = 25C -70 30 -80 Supply Current (mA) THD+N (dB) -75 256fS -85 384fS -90 -95 44.1k 48k 88.2k 256fS 20 10 44.1k 96k Sampling Rate, fS (Hz) 48k 88.2k Sampling Rate, fS (Hz) (R) PCM1723 384fS 4 96k TYPICAL PERFORMANCE CURVES At TA = +25C, VS = +5V, RL = 44.1kHz, and fSYS = 384fS, unless otherwise noted. DIGITAL FILTER OVERALL FREQUENCY CHARACTERISTIC PASSBAND RIPPLE CHARACTERISTIC 0 -20 -0.2 -40 -0.4 dB dB 0 -60 -0.6 -80 -0.8 -100 0 0.4536fS 1.3605fS 2.2675fS 3.1745fS -1 4.0815fS 0 0.1134fS Frequency (Hz) 5k 10k 15k 20k 25k 0 3628 15k 20k 25k 0 4999.8375 15k 14999.5125 19999.35 DE-EMPHASIS ERROR (48kHz) Error (dB) Level (dB) DE-EMPHASIS FREQUENCY RESPONSE (48kHz) 10k 9999.675 Frequency (Hz) 0 -2 -4 -6 -8 -10 -12 5k 14512 0.6 0.4 0.2 0 -0.2 -0.4 -0.6 Frequency (Hz) 0 10884 DE-EMPHASIS ERROR (44.1kHz) Error (dB) Level (dB) DE-EMPHASIS FREQUENCY RESPONSE (44.1kHz) 10k 7256 Frequency (Hz) 0 -2 -4 -6 -8 -10 -12 5k 0.4535fS 0.6 0.4 0.2 0 -0.2 -0.4 -0.6 Frequency (Hz) 0 0.3402fS DE-EMPHASIS ERROR (32kHz) Error (dB) Level (dB) DE-EMPHASIS FREQUENCY RESPONSE (32kHz) 0 -2 -4 -6 -8 -10 -12 0 0.2268fS Frequency (Hz) 20k 0.6 0.4 0.2 0 -0.2 -0.4 -0.6 0 25k Frequency (Hz) 5442 10884 16326 21768 Frequency (Hz) (R) 5 PCM1723 TYPICAL CONNECTION DIAGRAM Figure 1 illustrates the typical connection diagram for PCM1723 in an MPEG2 application. The 27MHz master video clock (fM) drives XTI (pin 1) of PCM1723. A programmable system clock is generated by the PCM1723 PLL, with SCKO used to drive the MPEG2 decoder's system clock input. The standard audio signals (data, bit clock, and word clock) are generated in the decoder from PCM1723's system clock, providing synchronization of audio and video signals. PLL CIRCUIT PCM1723 has a programmable internal PLL circuit, as shown in Figure 2. The PLL is designed to accept a 27MHz master clock or crystal oscillator and generate all internal system clocks required to operate the digital filter and modulator, either at 256fS or 384fS. If an external master clock is used, XTO should be connected to GND. The PLL will directly track any variations in the master clock's frequency, and jitter on the system clock is specified at 250ps maximum. Figure 3 illustrates the timing requirements for the 27MHz master clock. Figure 4 illustrates the system clock connections for an external clock or crystal oscillator. +5V Analog 23 22 PGND DGND 17 SERO Audio Decoder 16 SCKO 18 LRCKO 2 SYSCKI Master PLL VDD 3 VCP VOUTL DIN BCKIN CAP SCKO VOUTR PCM1723 ZERO 1 27MHz CLK OUT 24 14 15 + LRCIN Buffer 256/384fS SCR(1) or PCR 21 XTI Lch Analog Out Post LPF Analog Mute Rch Analog Out 10 MC MD RSTB AGND Analog Mute 10F 11 ML XTO Post LPF 6 STRB 7 SCKO 8 SDO 9 System Controller PIO VCC 12 13 +5V Analog NOTE: (1) SCR: System Clock Reference PCR: Program Clock Reference FIGURE 1. Connection Diagram for External Master Clock in a Typical MPEG2 Application. Sampling Frequency Selection 256fS/384fS Selection N Counter Frequency Selection ROM Oscillator Phase Detector and Loop Filter VCO M Counter 24 1 5 2 XTO XTI MCKO PLL Generated System Clock Out FIGURE 2. PLL Block Diagram. 1/27MHz tCH: 10ns (min) tCL: 15ns (min) tCH XTI 2.0V 0.8V tCL FIGURE 3. XTI Input Timing. (R) PCM1723 6 IIH (VIH = VDD) : 4mA max IIL (VIL = 0) : 700A max MCKO 27MHz Out MCKO Buffer 27MHz Internal Master Clock C1 X'tal XTI 27MHz Internal Master Clock XTI External Clock R R C2 XTO C1, C2 = 10 to 33pF XTO PCM1723 PCM1723 CRYSTAL RESONATOR CONNECTION EXTERNAL CLOCK INPUT FIGURE 4. System Clock Connection. 1/fS L_ch R_ch LRCIN (pin 4) BCKIN (pin 6) AUDIO DATA WORD = 16-BIT DIN (pin 5) 14 15 16 1 2 MSB AUDIO DATA WORD = 20-BIT DIN (pin 5) 18 19 20 1 2 23 24 1 2 15 16 1 22 MSB 14 3 MSB 19 20 1 2 LSB 3 2 LSB 18 3 MSB AUDIO DATA WORD = 24-BIT DIN (pin 5) 14 3 LSB 18 3 MSB 23 24 1 LSB 2 15 16 19 20 LSB 22 3 MSB 23 24 LSB FIGURE 5. "Normal" Data Input Timing. 1/fS L_ch LRCIN (pin 4) R_ch BCKIN (pin 6) AUDIO DATA WORD = 16-BIT DIN (pin 5) 1 2 MSB AUDIO DATA WORD = 20-BIT DIN (pin 5) 1 2 3 MSB AUDIO DATA WORD = 24-BIT DIN (pin 5) 3 1 2 3 MSB FIGURE 6. "I2S" 14 15 16 1 2 3 MSB LSB 18 19 20 1 2 LSB 22 3 MSB 23 24 1 LSB 2 3 MSB 14 1 2 19 20 1 2 23 24 1 2 15 16 LSB 18 LSB 22 LSB Data Input Timing. (R) 7 PCM1723 LRCKIN 1.4V tBCH tBCL tLB BCKIN 1.4V tBL tBCY 1.4V DIN tDS tDH BCKIN Pulse Cycle Time : tBCY : 100ns (min) BCKIN Pulse Width High : tBCH : 50ns (min) BCKIN Pulse Width Low : tBCL : 50ns (min) BCKIN Rising Edge to LRCIN Edge : tBL : 30ns (min) LRCIN Edge to BCKIN Rising Edge : tLB : 30ns (min) DIN Set-up Time : tDS : 30ns (min) DIN Hold Time : tDH : 30ns (min) FIGURE 7. Audio Data Input Timing. PCM1723's internal PLL can be programmed for nine different sampling frequencies (LRCIN), as shown in Table I. The internal sampling clocks generated by the various programmed frequencies are shown in Table II. The system clock output frequency for PCM1723 is 100% accurate. SPECIAL FUNCTIONS PCM1723 includes several special functions, including digital attenuation, digital de-emphasis, soft mute, data format selection and input word resolution. These functions are controlled using a three-wire interface. MD (pin 8) is used for the program data, MC (pin 7) is used to clock in the program data, and ML (pin 6) is used to latch in the program data. Table III lists the selectable special functions. Sampling Frequencies-LRCIN (kHz) Half of Standard Sampling Freq 16 22.05 24 Standard Sampling Freq 32 44.1 48 Double of Standard Sampling Freq 64 88.2 96 FUNCTION Input Audio Data Format Selection Normal Format I2S Format TABLE I. Sampling Frequencies. Sampling Frequency (LRCIN) System Clock 256fS System Clock 384fS 4.096MHz 6.144MHz Input Audio Data Bit Selection 16/20/24 Bits Input LRCIN Polarity Selection Lch/Rch = High/Low Lch/Rch = Low/High 16kHz Half 32kHz Standard 8.192MHz 12.288MHz 64kHz Double 16.384MHz 24.576MHz 22.05kHz Half 5.6448MHz 8.4672MHz 44.1kHz Standard 11.2896MHz 16.9344MHz 88.2kHz Double 22.5792MHz 33.8688MHz 24kHz Half 6.144MHz 9.216MHz Infinite Zero Detection Circuit Control 48kHz Standard 12.288MHz 18.432MHz Operation Enable (OPE) 96kHz Double 24.576MHz 36.864MHz Sample Rate Selection Internal System Clock Selection 256fS 384fS Double Sampling Rate Selection Standard Sampling Rate--44.1/48/32kHz Double Sampling Rate--88.2/96/32kHz Half Sampling Rate--22.05/24/16kHz Sampling Frequency 44.1kHz Group 48kHz Group 32kHz Group Frequency error of generated system clock by programmed PLL is less than 0.03ppm due to high accuracy PLL construction. To provide MCKO clock and SCKO clock for external circuit, external buffer circuit is effective to avoid degrading audio performance. 8 Lch/Rch = High/Low OFF OFF TABLE III. Selectable Functions. PCM1723 16 Bits Soft Mute Control Analog Output Mode L, R, Mono, Mute (R) Normal Format De-emphasis Control Attenuation Control Lch, Rch Individually Lch, Rch Common TABLE II. Sampling Frequencies vs Internal System Clock (= Output Frequencies of PLL). DEFAULT MODE 0dB Lch, Rch Individually Fixed OFF Enabled 384fS Standard Sampling Rate 44.1kHz Stereo MAPPING OF PROGRAM REGISTERS B15 B14 B13 B12 B11 B10 B9 B8 B7 B6 B5 B4 B3 B2 B1 B0 MODE0 res res res res res A1 A0 LDL AL7 AL6 AL5 AL4 AL3 AL2 AL1 AL0 MODE1 res res res res res A1 A0 LDR AR7 AR6 AR5 AR4 AR3 AR2 AR1 AR0 MODE2 res res res res res A1 A0 PL3 PL2 PL1 PL0 IW1 IW0 OPE DEM MUT MODE3 res res res res res A1 A0 IZD SF1 SF0 DSR1 DSR0 SYS ATC LRP I2S PROGRAM REGISTER BIT MAPPING loaded into AL0:AL7, but it will not affect the attenuation level until LDL is set to 1. LDR in Register 1 has the same function for right channel attenuation. PCM1723's special functions are controlled using four program registers which are 16 bits long. These registers are all loaded using MD. After the 16 data bits are clocked in, ML is used to latch in the data to the appropriate register. Table IV shows the complete mapping of the four registers and Figure 8 illustrates the serial interface timing. REGISTER NAME BIT NAME Register 0 AL (7:0) LDL A (1:0) Res DAC Attenuation Data for Lch Attenuation Data Load Control for Lch Register Address Reserved Register 1 AR (7:0) LDL A (1:0) Res DAC Attenuation Data for Rch Attenuation Data Load Control for Rch Register Address Reserved Register 2 MUT DEM OPE IW (1:0) PL (3:0) A (1:0) res Left and Right DACs Soft Mute Control De-emphasis Control Left and Right DACs Operation Control Input Audio Data Bit Select Output Mode Select Register Address Reserved Register 3 I2S LRP ATC SYS DSR (1:0) SF (1:0) IZD A (1:0) Res Attenuation Level (ATT) can be controlled as following Resistor set AL (R) (7:0). AL (R) (7:0) ATT LEVEL 00h 01h . . . FEh FFh -dB (Mute) -48.16dB . . . -0.07dB 0dB DESCRIPTION REGISTER 1 (A1 = 0, A0 = 1) B15 B14 B13 B12 B11 B10 B9 B8 res res res res res B7 B6 B5 B4 B3 B2 B1 B0 A1 A0 LDR AR7 AR6 AR5 AR4 AR3 AR2 AR1 AR0 Register 1 is used to control right channel attenuation. As in Register 1, bits 0 - 7 (AR0 - AR7) control the level of attenuation. Audio Data Format Select Polarity of LRCIN (pin 7) Select Attenuator Control System Clock Select Double Sampling Rate Select Sampling Rate Select Infinite Zero Detection Circuit Control Register Address Reserved REGISTER 2 (A1 = 1, A0 = 0) B15 B14 B13 B12 B11 B10 B9 B8 res res res res res A1 B7 B6 B5 B4 B3 B2 B1 B0 A0 PL3 PL2 PL1 PL0 IW1 IW0 OPE DEM MUTE TABLE IV. Internal Register Mapping. Register 2 is used to control soft mute, de-emphasis, operation enable, input resolution, and output format. Bit 0 is used for soft mute: a "HIGH" level on bit 0 will cause the output to be muted (this is ramped down in the digital domain, so no "click" is audible). Bit 1 is used to control de-emphasis. A "LOW" level on bit 1 disables de-emphasis, while a "HIGH" level enables de-emphasis. REGISTER 0 (A1 = 0, A0 = 0) B15 B14 B13 B12 B11 B10 B9 B8 B7 B6 B5 B4 B3 B2 B1 B0 res res res res res A1 A0 LDL AL7 AL6 AL5 AL4 AL3 AL2 AL1 AL0 Register 0 is used to control left channel attenuation. Bits 0 - 7 (AL0 - AL7) are used to determine the attenuation level. The level of attenuation is given by: Bit 2, (OPE) is used for operational control. Table V illustrates the features controlled by OPE. ATT = [20 log10 (ATT_DATA/255)] dB ATTENUATION DATA LOAD CONTROL Bit 8 (LDL) is used to control the loading of attenuation data in B0:B7. When LDL is set to 0, attenuation data will be OPE = 1 OPE = 0 DATA INPUT DAC OUTPUT SOFTWARE MODE INPUT Enabled Zero Forced to BPZ(1) Other Forced to BPZ(1) Enabled Zero Controlled by IZD Enabled Other Normal Enabled TABLE V. Operation Enable (OPE) Function. (R) 9 PCM1723 REGISTER 3 (A1 = 1, A0 = 1) OPE controls the operation of the DAC: when OPE is "LOW", the DAC will convert all non-zero input data. If the input data is continuously zero for 65, 536 cycles of BCKIN, the output will be forced to zero only if IZD is "HIGH". When OPE is "HIGH", the output of the DAC will be forced to bipolar zero, irrespective of any input data. DATA INPUT DAC OUTPUT Zero Forced to BPZ(1) Other Normal IZD = 1 IZD = 0 Zero Zero(2) Other Normal DATA INPUT DAC OUTPUT Zero Controlled by OPE and IZD Enabled Other Controlled by OPE and IZD Enabled Zero Forced to BPZ(1) Disabled Other Forced to BPZ(1) Disabled RSTB = "HIGH" RSTB = "LOW" B8 B7 B6 res IZD SF1 SF0 DSR1 DSR0 SYS ATC LRP I2S res res res res A1 A0 B5 B4 B3 B2 B1 B0 Register 3 is used to control input data format and polarity, attenuation channel control, system clock frequency, sampling frequency and infinite zero detection. Bits 0 (I2S) and 1 (LRP) are used to control the input data format. A "LOW" on bit 0 sets the format to "Normal" (MSB-first, right-justified Japanese format) and a "HIGH" sets the format to I2S (Philips serial data protocol). Bit 1 (LRP) is used to select the polarity of LRCIN (sample rate clock). When bit 1 is "LOW", left channel data is assumed when LRCIN is in a "HIGH" phase and right channel data is assumed when LRCIN is in a "LOW" phase. When bit 1 is "HIGH", the polarity assumption is reversed. TABLE VI. Infinite Zero Detection (IZD) Function. SOFTWARE MODE INPUT B15 B14 B13 B12 B11 B10 B9 Bit 2 (ATC) is used for controlling the attenuator. When bit 2 is "HIGH", the attenuation data loaded in program Register 0 is used for both left and right channels. When bit 2 is "LOW", the attenuation data for each register is applied separately to left and right channels. TABLE VII. Reset (RSTB) Function. NOTE: (1) is disconnected from output amplifier. (2) is connected to output amplifier. Bit 3 (SYS) is the system clock selection. When bit 3 is "LOW", the system clock frequency is set to 384f S. When bit 3 is "HIGH", the system clock frequency is set to 256f S. Bits 3 (IW0) and 4 (IW1) are used to determine input word resolution. PCM1723 can be set up for input word resolutions of 16, 20, or 24 bits: Bits 4 (DSR0) and 5 (DSR1) are used to control multiples of the sampling rate: Bit 4 (IW1) Bit 3 (IW0) Input Resolution 0 0 1 1 0 1 0 1 16-bit Data Word 20-bit Data Word 24-bit Data Word Reserved PL1 PL2 PL3 Lch OUTPUT Rch OUTPUT NOTE 0 0 0 0 MUTE MUTE MUTE 0 0 0 1 MUTE R 0 0 1 0 MUTE L 0 0 1 1 MUTE (L + R)/2 0 1 0 0 R MUTE 0 1 0 1 R R 0 1 1 0 R L 0 1 1 1 R (L + R)/2 1 0 0 0 L MUTE 1 0 0 1 L R 1 0 1 0 L L 1 0 1 1 L (L + R)/2 1 1 0 0 (L + R)/2 MUTE 1 1 0 1 (L + R)/2 R 1 1 1 0 (L + R)/2 L 1 1 1 1 (L + R)/2 (L + R)/2 0 1 0 1 Multiple Normal Double One-half Reserved 32/44.1/48kHz 64/88.2/96kHz 16/22.05/24kHz Not Defined Bit 8 is used to control the infinite zero detection function (IZD). REVERSE SF1 SF0 0 0 1 1 0 1 0 1 Sampling Frequency 44.1kHz group 48kHz group 32kHz group Reserved 22.05/44.1/88.2kHz 24/48/96kHz 16/32/64kHz Not Defined When IZD is "LOW", the zero detect circuit is off. Under this condition, no automatic muting will occur if the input is continuously zero. When IZD is "HIGH", the zero detect feature is enabled. If the input data is continuously zero for 65, 536 cycles of BCKIN, the output will be immediately forced to a bipolar zero state (VCC/2). The zero detection feature is used to avoid noise which may occur when the input is DC. When the output is forced to bipolar zero, there may be an audible click. PCM1723 allows the zero detect feature to be disabled so the user can implement an external muting circuit. STEREO MONO TABLE VIII. Programmable Output Format. (R) PCM1723 DSR0 0 0 1 1 Bits 6 (SF0) and 7 (SF1) are used to select the sampling frequency: Bits 5, 6, 7, and 8 (PL0:3) are used to control output format. The output of PCM1723 can be programmed for 16 different states, as shown in Table VIII. PL0 DSR1 10 ML (pin 6) MC (pin 7) MD (pin 8) B15 B14 B13 B12 B11 B10 B9 B8 B7 B6 B5 B4 B3 B2 B1 B0 FIGURE 8. Three-Wire Serial Interface. ML MC tMHH tMLH tMLS 1.4V ML MD tMCH tMCL tMLL 1.4V MC tMCY LSB MD tMDS 1.4V tMDH MC Pulse Cycle Time MC Pulse Width LOW MC Pulse Width HIGH MD Setup Time MD Hold Time ML Low Level Time ML High Level Time ML Setup Time ML Hold Time tMCY tMCL tMCH tMDS tMDH tMLL tMLH tMLS tMHH 100ns (min) 50ns (min) 50ns (min) 30ns (min) 30ns (min) 30ns + 1SYSCLK (min) 30ns + 1SYSCLK (min) 30ns (min) 30ns (min) SYSCLK: 1/256fS or 1/384fS FIGURE 9. Program Register Input Timing. APPLICATION CONSIDERATIONS DELAY TIME There is a finite delay time in delta-sigma converters. In A/D converters, this is commonly referred to as latency. For a delta-sigma D/A converter, delay time is determined by the order number of the FIR filter stage, and the chosen sampling rate. The following equation expresses the delay time of PCM1723: sional applications such as broadcast audio for studios, it is important for total delay time to be less than 2ms. OUTPUT FILTERING For testing purposes all dynamic tests are done on the PCM1723 using a 20kHz low pass filter. This filter limits the measured bandwidth for THD+N, etc. to 20kHz. Failure to use such a filter will result in higher THD+N and lower SNR and Dynamic Range readings than are found in the specifications. The low pass filter removes out of band noise. Although it is not audible, it may affect dynamic specification numbers. TD = 11.125 x 1/fS For fS = 44.1kHz, TD = 11.125/44.1kHz = 251.4s Applications using data from a disc or tape source, such as CD audio, CD-Interactive, Video CD, DAT, Minidisc, etc., generally are not affected by delay time. For some profes- (R) 11 PCM1723 The performance of the internal low pass filter from DC to 24kHz is shown in Figure 10. The higher frequency rolloff of the filter is shown in Figure 11. If the user's application has the PCM1723 driving a wideband amplifier, it is recommended to use an external low pass filter. A simple 3rdorder filter is shown in Figure 12. For some applications, a passive RC filter or 2nd-order filter may be adequate. RSTB = LOW. For internal power on reset, initialize (reset) is done automatically at power on VDD >2.2V (typ). During internal reset = LOW, the output of the DAC is invalid and the analog outputs are forced to VCC/2. Figure 13 illustrates the timing of internal power on reset. PCM1723 accepts an external forced reset when RSTB = L. During RSTB = L, the output of the DAC is invalid and the analog outputs are forced to VCC/2 after internal initialize (1024 system clocks count after RSTB = H.) Figure 14 illustrates the timing of RSTB pin reset. Reset PCM1723 has both internal power-on reset circuit and the RSTB pin (pin 9) which accepts an external forced reset by INTERNAL ANALOG FILTER FREQUENCY RESPONSE (10Hz~10MHz) INTERNAL ANALOG FILTER FREQUENCY RESPONSE (20Hz~24kHz, Expanded Scale) 1.0 dB dB 0.5 0 -0.5 -1.0 20 100 1k Frequency (Hz) 10k 10 5 0 -5 -10 -15 -20 -25 -30 -35 -40 -45 -50 -55 -60 10 24k 100 1k 10k 100k 1M 10M Frequency (Hz) FIGURE 11. Low Pass Filter Wideband Frequency Response. FIGURE 10. Low Pass Filter Frequency Response. GAIN vs FREQUENCY 90 6 + 10k VSIN 10k 680pF OPA604 10k -14 0 -34 -90 -180 -54 Phase 100pF - -270 -74 -360 -94 100 FIGURE 12. 3rd-Order LPF. (R) PCM1723 12 1k 10k Frequency (Hz) 100k 1M Phase () 1500pF Gain (dB) Gain 2.6V VCC/VDD 2.2V 1.8V Reset Reset Removal Internal Reset 1024 system (= XTI) clocks XTI Clock FIGURE 13. Internal Power-On Reset Timing. RSTB 50% of VDD tRST(1) Reset Reset Removal Internal Reset 1024 system (XTI) clocks XTI Clock NOTE: (1) tRST = 20ns min FIGURE 14. RSTB-Pin Reset Timing. POWER SUPPLY CONNECTIONS PCM1723 has three power supply connections: digital (VDD), analog (VCC), and PLL (VCP). Each connection also has a separate ground return pin. It is acceptable to use a common +5V power supply for all three power pins. If separate supplies are used without a common connection, the delta between the supplies during ramp-up time must be less than 0.6V. An application circuit to avoid a power-on latch-up condition is shown in Figure 15. Digital Power Supply Analog Power Supply VDD DGND BYPASSING POWER SUPPLIES The power supplies should be bypassed as close as possible to the unit. Refer to Figure 18 for optimal values of bypass capacitors. Its is also recommended to include a 0.1F ceramic capacitor in parallel with the 10F tantalum capacitor. VCP VCC AGND FIGURE 15. Latch-up Prevention Circuit. (R) 13 PCM1723 THEORY OF OPERATION AC-3 APPLICATION CIRCUIT A typical application for PCM1723 is AC-3 5.1 channel audio decoding and playback. This circuit uses PCM1723 to develop the audio system clock from the 27MHz video clock, with the SCKO pin used to drive the AC-3 decoder and two PCM1720 units, the non-PLL version of PCM1723. The delta-sigma section of PCM1723 is based on a 5-level amplitude quantizer and a 3rd-order noise shaper. This section converts the oversampled input data to 5-level deltasigma format. A block diagram of the 5-level delta-sigma modulator is shown in Figure 16. This 5-level delta-sigma modulator has the advantage of stability and clock jitter sensitivity over the typical one-bit (2 level) delta-sigma modulator. 3rd ORDER MODULATOR 20 The combined oversampling rate of the delta-sigma modulator and the internal 8X interpolation filter is 48fS for a 384fS system clock, and 64fS for a 256fS system clock. The theoretical quantization noise performance of the 5-level delta-sigma modulator is shown in Figure 17. 0 Gain (-dB) -20 -40 -60 -80 -100 -120 -140 -160 0 5 10 15 Frequency (kHz) FIGURE 17. Quantization Noise Spectrum. + + In 8fS 18-Bit + Z-1 + + - + Z-1 - + + 5-level Quantizer + 4 3 Out 48fS (384fS) 64fS (256fS) 2 1 0 FIGURE 16. 5-Level Modulator Block Diagram. (R) PCM1723 14 Z-1 20 25 10F + BCKO AC-3 Audio Decoder +5V Analog 20 LRCKO 14 16 DO_0 DO_1 15 DO_2 2 SYSCKI 19 DGND VDD VOUTL BCKIN DIN CAP 6 7 13 Analog Mute Right-Channel Front Speaker 200 + 10F Post Low Pass Filter 9 ML MC ZERO 8 Mute Control MD RSTB AGND STRB P Left-Channel Front Speaker SCKI VOUTR 5 Analog Mute LRCIN PCM1720 4 Post Low Pass Filter 12 VCC 10 11 3.3F + SCKO +5V Analog SDO 10F + Three-wire I/F (Serial I/O) +5V Analog 20 3 DGND 14 16 15 2 19 VDD VOUTL BCKIN Post Low Pass Filter 12 DIN CAP 13 6 7 + Post Low Pass Filter 9 MC ZERO 8 Mute Control MD RSTB AGND VCC 11 +5V Analog 10F + 23 Master Clock Generator or PLL 18 17 2 22 +5V Analog 21 3 PGND DGND VDD VDP VOUTL BCKIN 14 Post Low Pass Filter Analog Mute Center Channel Post Low Pass Filter Analog Mute Sub-Woofer LRCIN DIN CAP 15 + 10F SCKO PCM1723 Buffer 1 6 7 8 Reset Left-Channel Surround Speaker 10F ML 10 3.3F + 16 Analog Mute 200 SCKI VOUTR 5 Left-Channel Surround Speaker LRCIN PCM1720 4 Analog Mute 9 VOUTR XTI 11 ML MC ZERO 10 Mute Control MD 24 RSTB AGND VCC 12 13 +5V Analog + 3.3F FIGURE 18. Connection Diagram for a 6-Channel AC-3 Application. (R) 15 PCM1723 PACKAGE OPTION ADDENDUM www.ti.com 4-Nov-2005 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing PCM1723E ACTIVE SSOP DB 24 PCM1723E/2K ACTIVE SSOP DB 24 PCM1723EG/2K ACTIVE PCM1723EG4 ACTIVE SSOP DB Pins Package Eco Plan (2) Qty 24 58 Lead/Ball Finish MSL Peak Temp (3) Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Pb-Free (RoHS) CU SNBI Level-2-260C-1 YEAR Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 58 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS) or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2005, Texas Instruments Incorporated