WRITTEN APPROVAL OF BEL FUSE INC, THE INFORMATION CONTAINED HEREIN IS CONSIDERED PROPRIETARY TO BEL FUSE INC. AND SHALL NOT BE COPIED, REPRODUCED OR DISCLOSED WITHOUT THE TURNS RATIO TX RX OCL @ 100kHZ/100mVRMS 8mA DC BIAS INS. LOSS 1IMHz TO 100MHz RET, LOSS MIND IMHz-30MHz 30MHz-60MHz 60MHz-80MHz CROSS TALK TX - RX) S00KHz-1MHz 10 MHz 30 MHz 30 MHz 100 MHz CM TO CM REJ 100kKHz-1MHz 10 MHz 30 MHz 60 MHz 100 MHz CM TO DM REJ 100kKHz-1MHz 10 MHz 30 MHz 60 MHz 100 MHz HIPOT (Isolation Voltage): ELECTRICAL CHARACTERISTICS @ 25C 1cT 11 1cT + 1 350yH MIN, -1,0 dB MAX -18 oB 18+20LOGCF/30MHZ) oB -12 dB -70 dB MIN -30 dB MIN -45 oB MIN -40 dB MIN -35 oB MIN 70 dB MIN -47 dB MIN -42 dB MIN -37 dB MIN -30 dB MIN -70 dB MIN -60 dB MIN -50 dB MIN -45 oB MIN -40 dB MIN 1500 Vrms 100% OF PRODUCTION TESTED TO COMPLY WITH IEEE 802.3 ISOLATION REQUIREMENTS SCHEMATIC PIN ICT 1 1 TCT 1 TTP TD+ 2 : TD- 3 RD+ 4 e P RD- 5 RCT 6 e 4X 7S0HMS 1000pF 2kV -_ SHIELD 7777- RoHS RJ45 1 TX+ RX+ RX- ON DUA W ORIGINATED BY DATE CHOW WANCHUNG 2012-07-09 DRAWN BY DATE TANG QIGUANG 2012-07-09 TITLE 10/100 MagJack 4 Cores, MDIX, CM Termination) 08B1-1X1T-06-F PATENTED PART NO. / DRAWING NO. O8B11X1T06-F STANDARD DIM. TOL. IN INCH _| UNIT : INCH [mm] | REV. : { ] METRIC DIM. AS REFERENCE FILE NAME 08Bi1X1TO6-F_C.DWG xX XX SCALE: N/A SIZE : FA /. A4 bel POMENTSFoR CON ED XXX 6)--==+- [Pace : DC002(2)081111 This document is electronically generated. This is a controlled copy if used internally THE INFORMATION CONTAINED HEREIN IS CONSIDERED PROPRIETARY TO BEL FUSE INC. AND SHALL NOT BE COPIED, REPRODUCED OR DISCLOSED WITHOUT THE WRITTEN APPROVAL OF BEL FUSE INC, NOTES: PINS: METAL SHIELD: PATENTED? PLASTIC HOUSING: CONTACTS PLATING: MECHANICAL SPECIFICATION CS, \ / X Il AC LL 0.125 3.17] SIGNAL LEADS on oi 12480 StT @S }+1,005 [25,531 on he 0,642 [16.314 no so Oe { 3 AS co oy of | )-RU45 1 ae t 2 Bs 4 P ws c> oO =) oO a OF ow i] ; B71 | |__| 9500 t12.703 0.305 [7.751 THERMOPLASTIC PBT FLAMMABILITY RATING UL 94V-0 0125 (3.171- 0.565 [14.35] 15 MICRO-INCH HARD GOLD PLATING OR EQUIVALENT. TIN-COATED COPPER WIRE, DIA 0,018 INCH. PRE-PLATED NICKEL ON COPPER ALLOY. <ALL GROUND LEADS ARE SOLDER DIPPED) MARKING. ff] MARK PART WITH MFG LOGO, MFG NAME, PART NUMBER AND DATE CODE. cWkus UL RECOGNIZED - FILE #196366 AND 169987, 3. THE PRODUCT IS RoHS COMPLIANT. - RoHS 4, JACK CAVITY CONFORMS TO FCC RULES AND REGULATIONS, PART 68 SUBPART F., 3. THE PRODUCT IS PATENTED, THE PATENT NUMBER IS U.S. PAT. 5,736,910. ORIGINATED BY DATE TITLE 10/100 Mag Jock PART NO. / DRAWING NO. STANDARD DIM. [ ] METRIC DIM. AS REFERENCE ANTON LIAO -07- 08 TO6- TOL. IN INCH . . e0le-07 091 <4 Cores, MDIX, CM Termination? peter - unt not faal[ev.. | oel DRAWN BY DATE 08B1-1X1T-06-F FILE NAME se SCALE: N/A ___|SIZE : Ad | comonnmscc, HE ZHEN 2012-07-09 PATENTED OSBLIXITO6-F_CDWG [segs] =F _ [Pace 2 DC002(2)081111 This document is electronically generated. This is a controlled copy if used internally THE INFORMATION CONTAINED HEREIN IS CONSIDERED PROPRIETARY TO BEL FUSE INC. AND SHALL NOT BE COPIED, REPRODUCED OR DISCLOSED WITHOUT THE WRITTEN APPROVAL OF BEL FUSE INC, 0.710 [18,03] 0.430 [10,92] - 0,180 [4.57] RoHS RECOMMENDED PCB FOOTPRINT COMPONENT SIDE VIEW 0.635 [16.13] 0.500 [12.70] 40,062 [91,57] 2 PLACES 0.430 [10.92] 0.700 [17.78] 0.145 [3.68] 0.440 [11.17] MUL SK $ _ +. $ $ 4 \ 40,128 Weed go] es Po [3.17] @ 4 #0,035*9-005 | go.g9t013 | N 0.000 0.00 6 PLACES FUR SIGNAL LEADS $3 123 $$36 _| | o089 [2,03] PITCH > 0,050 [1.27] NOTES: THE SHADED AREA ON THE CUSTOMER BOARD ARE RECOMMENDED TO BE CLEAR OFF ANY VIA HOLE OR COMPONENT PAD. ORIGINATED BY DATE TITLE 10/100 M ag J ack PART NO. / DRAWING NO. STANDARD DIM. [ ] METRIC DIM. AS REFERENCE ANTON LIAO 2012-07-09 |4 Cores, MDIX, CM Termination? 08B11X1T06-F TOL. IN INCH liar; INCH Immj|rev.: c | tOeT DRAWN BY DATE 08B1-1X1T-06-F FILE NAME =~ SCALE: N/A SIZE: A4 comrowmnsscen HE ZHEN 2012-07-09 PATENTED OSBI1X1T06-F_C.DWG [xx 7[<mo0n | E_si[race: 4 pc002(2)081111 This document is electronically generated. This is a controlled copy if used internally THE INFORMATION CONTAINED HEREIN IS CONSIDERED PROPRIETARY? TO BEL FUSE INC. AND SHALL NOT BE COPIED, REPRODUCED OR DISCLOSED WITHOUT THE WRITTEN APPROVAL OF BEL FUSE INC. NOTE: NOTE Z SUGGESTED PANEL UPENING METAL PANEL 0546 1 pase ] 0.556 [14.12] IL) 0200-9999-D4 (TURP? 0200-9999-D3BUT TUM) PACKING QUANTITY 60 PCS FINISHED GUUDS PER TRAY 1 TRAYS c660 PCS FINISHED GUUD PCB THE DISTANCE OF PANEL INSIDE SURFACE RELATIVE TO FRONT SURFACE OF PART IS ONLY A SUGGESTION IN CASE THIS DISTANCE IS DIFFERENT, THE REQUIRED PANEL UPENING DIMENSIONS CHANGE ACCORDINGLY PACKING INFORMATION PACKING TRAY S>) PER CARTUN BUX 0.080 [2.03] CARDBUARDS ARE PLACED BETWEEN LAYERS UF PACKING TRAY INSIDE CARTON BUX CINCLUDE THE UPPERMOST AND LOWERMOST TRAY) RoHS ORIGINATED BY DATE TITLE 10/100 Mag Jack PART NO. / DRAWING NO. STANDARD DIM. [ ] METRIC DIM. AS REFERENCE ANTON LIAO 2012-07-09 }4 Cores, MDIX, CM Termination) OSBLIX1T0S-F ToL. IN INCH lint INcH [mmj|rev.: | Oel DRAWN BY DATE O8B1-1X1T-06-F FILE NAME = SCALE: N/A SIZE: A4_ | comounnrace, HE ZHEN 2012-07-09 PATENTED O8B11X1T06-F _C.DWG "xxx | 004 ) e+ _[Pace: 5 pcooz2(2)081111 This document is electronically generated. This is a controlled copy if used internally