SPECIFICATION
(Reference sheet)
· Supplier : Samsung electro-mechanics · Samsung P/N :
· Product : Multi-layer Ceramic Capacitor · Description : CAP, 1.2㎋, 1000V, ± 5%, C0G, 1812
CL 43 C122 J I I N N N F
① ②③ ④ ⑤ ⑥ ⑦ ⑧⑨⑩⑪
①Series Samsung Multi-layer Ceramic Capacitor
②Size 1812 (inch code) L: 4.50 ± 0.40 mm W: 3.20 ± 0.30 mm
③Dielectric C0G ⑧Inner electrode
④Capacitance 1.2
㎋
Termination
⑤Capacitance Plating (Pb Free)
tolerance ⑨Product Normal
⑥Rated Volt age 1000 V ⑩Special Reserved for future use
⑦Thickness 2.00 ± 0.20 mm ⑪Packaging Embossed Type, 13" reel
B. Structure and dimension
± 5%
CL43C122JIINNNF 4.50 ± 0.40 3.20 ± 0.30 2.00 ± 0.20 0.80 ± 0.30
BW
A. Samsung Part Number
Samsung P/N
Dimension(㎜)
LWT
Sn 100%
Cu
Ni
CL43C122JIINNNF
C. Samsung Reliability Test and Judgement condition
Capacitance Within specified tolerance
Q1,000 min
Insulation 10,000Mohm or 500Mohm×㎌500 ±50 Vdc 60±5 sec.
Resistance Whichever is smaller
Appearance No abnormal exterior appearance Microscop (X10)
Withstanding No dielectric breakdown or of the rated voltage
Voltage mechanical breakdown
Temperature C0G
Characteristics (From -55℃ to 125℃, Capacitance change should be within ±30PPM/℃)
Adhesive Strength No peeling shall be occur on the 500g×F, for 10±1 sec.
of Termination terminal electrode
Bending Strength Capacitance change : Bending to the limit (1mm)
within ±5% or ±0.5㎊ whichever is large
r
with 1.0mm/sec.
Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder
is to be soldered newly 245±5℃, 3±0.3sec.
(preheating : 80~120℃ for 10~30sec.)
Resistance t o Capacitance change : Solder pot : 270±5℃, 10±1sec.
Soldering heat within ±2.5% or ±0.25㎊ whichever is larger
Tan δ, IR : initial spec.
Vibration Test Capacitance change : Amplitude : 1.5mm
within ±2.5% or ±0.25㎊ whichever is larger From 10㎐ to 55㎐ (return : 1min.)
Tan δ, IR : initial spec. 2hours ´ 3 direction (x, y, z)
High Temperature Capacitance change : With of the rated voltage
Resistance within ±3% or ±0.3㎊ whichever is large
r
Max. operating temperature
Q : 350 min 1000+48/-0hrs
IR : 1,000Mohm or 50Mohm × ㎌
Whichever is smaller
Temperature Capacitance change : 1 cycle condition
Cycling within ±2.5% or ±0.25㎊ whichever is larger Min. operating temperature →25℃
Tan δ, IR : initial spec. →Max. operating temperature →25℃
5 cycle test
※ The reliability test condition can be replaced by the corresponding accelerated test condition.
D. Recommended Soldering method :
Reflow ( Reflow Peak Temperature : 260+0/-5℃, 10sec. Max )
Product specifications included in the specifications are effective as of March 1, 2013.
Please be advised that they are standard product specifications for reference only.
We may change, modify or discontinue the product specifications without notice at any time.
So, you need to approve the product specifications before placing an order.
Should you have any question regarding the product specifications,
please contact our sales personnel or application engineers.
1㎑±10% / 0.5~5Vrms
Performance Test condition
120%
100%
- Disclaimer & Limitation of Use and Application -
The products listed in this Specification sheet are NOT designed and manufactured for any use
and applications set forth below.
Please note that any misuse of the products deviating from products specifications or information
provided in this Spec sheet may cause serious property damages or personal injury.
We will NOT be liable for any damages resulting from any misuse of the products, specifically
including using the products for high reliability applications as listed below.
If you have any questions regarding this 'Limitation of Use and Application', you should first contact
our sales personnel or application engineers.
①
Aerospace/Aviation equipment
②
Automotive or Transportation equipment (vehicles
,
trains
,
ships
,
etc)
③
Medical equipment
④
Military equipment
⑤
Disaster prevention/crime prevention equipment
⑥
Any other applications with the same as or similar complexity or reliability to the applications
set forth above.
● Disclaimer & Limitation of Use and Application
The products listed in this Specification sheet are NOT designed and manufactured for any use
and applications set forth below.
Please note that any misuse of the products deviating from products specifications or information
provided in this Spec sheet may cause serious property damages or personal injury.
We will NOT be liable for any damages resulting from any misuse of the products, specifically
including using the products for high reliability applications as listed below.
If you have any questions regarding this 'Limitation of Use and Application', you should first contact
our sales personnel or application engineers.
①
Aerospace/Aviation equipment
②
Automotive or Transportation equipment (vehicles, trains, ships, etc)
③
Medical equipment
④
Military equipment
⑤
Disaster prevention/crime prevention equipment
⑥
Power plant control equipment
⑦
Atomic energy-related equipment
⑧
Undersea equipment
⑨
Traffic signal equipment
⑩
Data-processing equipment
⑪
Electric heating apparatus, burning equipment
⑫
Safety equipment
⑬
Any other applications with the same as or similar complexity or reliability to the applications
