MDM (Military M83401) Vishay Dale Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ010 and RZ020, Dual-In-Line, Molded DIP FEATURES * * * * * * Isolated, bussed and dual terminator schematics available MIL-PRF-83401 qualified Epoxy molded construction All device leads are hot-solder dipped Available in tube pack TCR available in "K" ( 100 ppm/C) or "M" ( 300 ppm/C) depending on style * 100 % screen tested per group A, subgroup 1 of MIL-PRF-83401 * All devices are capable of passing the MIL-STD-202, method 210, condition D, "Resistance to Soldering Heat" test STANDARD ELECTRICAL SPECIFICATIONS POWER RATING TEMPERATURE RESISTANCE MIL VISHAY DALE TOLERANCE (2) COEFFICIENT (1) WEIGHT MIL ELEMENT PACKAGE RANGE SPEC. SCHEMATIC MODEL/ g STYLE % (- 55 C to + 125 C) P70 C P70 C SHEET PIN NO. ppm/C W W 01 (B) 0.10 1.30 10 to 1M MDM14 RZ010 01 03 (A) 0.20 1.40 10 to 1M 1, 2, 5 100, 300 1.3 05 (J) 0.05 1.20 Consult factory 01 (B) 0.10 1.50 10 to 1M MDM16 RZ020 02 03 (A) 0.20 1.60 10 to 1M 1, 2, 5 100, 300 1.5 05 (J) 0.05 1.40 Consult factory Notes (1) K = 100 ppm/C; M = 300 ppm/C (2) 2 % standard, 1 % and 5 % available GLOBAL PART NUMBER INFORMATION New Global Part Numbering: M8340101M2201GBD04 (preferred part numbering format) M 8 3 4 0 1 0 1 M 2 2 0 CHARACTERISTIC RESISTANCE TOLERANCE VALUE 01 = 14 pin K = 100 ppm 3 digit significant F=1% M83401 figure, followed 02 = 16 pin M = 300 ppm G=2% by a multiplier J=5% 10R0 = 10 3302 = 33 k 1004 = 1 M Historical Part Number example: M8340101M2201GB (will continue to be accepted) 2201 01 M83401 M MIL STYLE 1 SPEC SHEET MIL STYLE SPEC SHEET CHARACTERISTIC RESISTANCE VALUE G B D 0 4 SCHEMATIC PACKAGING A = Isolated B = Bussed D04 = Tin/lead, tube DSL = Tin/lead, tube, single lot date code G B D04 TOLERANCE SCHEMATIC PACKAGING New Global Part Numbering: M8340102KA001GJD04 (preferred part numbering format) M 8 3 4 0 1 0 2 K A 0 0 RESISTANCE TOLERANCE VALUE Per std. Mil. Spec F=1% M83401 01 = 14 pin K = 100 ppm (see Impedence G=2% 02 = 16 pin M = 300 ppm codes table) J=5% Historical Part Number example: M8340102KA001GJ (will continue to be accepted) M83401 02 K A001 MIL STYLE MIL STYLE www.vishay.com 1 1 SPEC SHEET CHARACTERISTIC SPEC SHEET CHARACTERISTIC RESISTANCE VALUE G J D 0 4 SCHEMATIC PACKAGING J = Dual terminator D04 = Tin/lead, tube DSL = Tin/lead, tube, single lot date code G J D04 TOLERANCE SCHEMATIC PACKAGING For technical questions, contact: ff2aresistors@vishay.com Document Number: 31516 Revision: 03-Mar-10 MDM (Military M83401) Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ010 and RZ020, Dual-In-Line, Molded DIP Vishay Dale DIMENSIONS in inches (millimeters) 0.310 0.010 (7.87 0.254) TYP 0.030 (0.762) A 0.010 (0.254) 0.250 0.005 (6.35 0.127) 0.120 0.005 (3.05 0.127) Pin #1 Identification 0.130 + 0.015 - 0.005 (3.30 + 0.381 - 0.127) Pin #1 0.075 0.015 (1.91 0.381) 0.018 0.003 (0.457 0.076) 0.290 Min. 0.320 Nom. 0.360 Max. (7.37 Min. 8.13 Nom. 9.14 Max.) 0.100 0.010 (2.54 0.254) Non-Accumulative Tol. "C" Spaces B 0.010 (0.254) VISHAY DALE MODEL 0.010 + 0.005 - 0.002 (0.254 + 0.127 - 0.051) 0.050 0.005 (1.27 0.127) A B C MDM14 0.750 (19.05) 0.600 (15.24) 6 MDM16 0.850 (21.59) 0.700 (17.78) 7 IMPEDANCE CODES CODE R1 () R2 () CODE R1 () R2 () A001 82 130 A010 330 470 A002 120 200 A011 330 680 A003 130 210 A012 1.5K 3.3K A004 160 260 A013 3K 6.2K A005 180 240 A014 180 270 A006 180 390 A015 270 270 A007 220 270 A016 560 560 A008 220 330 A017 560 1.2K A009 330 390 A018 620 2.7K TECHNICAL SPECIFICATIONS PARAMETER UNIT Maximum Operating Voltage VDC MDM SERIES 100 Voltage Coefficient of Resistance Veff < 50 ppm Dielectric Strength VAC 200 per min Insulation Resistance 10 000 M Operating Temperature Range C - 55 to + 125 Storage Temperature Range C - 55 to + 150 MECHANICAL SPECIFICATIONS Marking Resistance to Solvents Solderability Body Terminals Document Number: 31516 Revision: 03-Mar-10 Permanency testing per MIL-PRF-83401 Per MIL-PRF-83401 Molded epoxy Copper alloy, hot-solder dipped For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 2 MDM (Military M83401) Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ010 and RZ020, Dual-In-Line, Molded DIP Vishay Dale CIRCUIT APPLICATIONS 01 SCHEMATIC MDM1401 (M8340101xxxxxxB) MDM1601 (M8340102xxxxxxB) 13 or 15 resistors with one pin common The MDMxx01 provides the user with a choice of 13 or 15 nominally equal resistors, each connected to a common pin. Commonly used in the following applications: * * * * * * * * * MOS/ROM Pull-up/Pull-down * Open Collector Pull-up * "Wired OR" Pull-up * Power Driven Pull-up MDM1401 Pin #1 MDM1601 03 SCHEMATIC * TTL Input Pull-down * Digital Pulse Squaring * TTL Unused Gate Pull-up * High Speed Parallel Pull-up MDM1403 (M8340101xxxxxxA) MDM1603 (M8340102xxxxxxA) 7 or 8 isolated resistors The MDMxx03 provides the user with a choice of 7 or 8 nominally equal resistors, with each resistor isolated from all others. Commonly used in the following applications: * "Wired OR" Pull-up * Long-line Impedance Balancing * Power Driven Pull-up * LED Current Limiting * Power Gate Pull-up * ECL Output Pull-down * Line Termination * TTL Input Pull-down MDM1403 Pin #1 MDM1603 05 SCHEMATIC R1 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R2 R1 R1 R1 R2 R2 R2 R2 R1 R1 R1 R1 R2 R2 MDM1405 (M8340101xxxxxxJ) MDM1605 (M8340102xxxxxxJ) 12 or 14 resistor pairs The MDMxx05 provides the user with a choice of 12 or 14 pairs of R1/R2 resistor values for pulse squaring and TTL dual-line terminating requirements. R2 MDM1405, MDM1605 Pin #1 CAGE CODE: 91637 1.30 MDM 16 MDM 14 05 Schematic Power Rating (W) 1.50 03 Schematic Power Rating (W) Power Rating (W) 01 Schematic MDM 16 1.60 MDM 14 1.40 1.00 1.00 1.20 MDM 16 MDM 14 1.00 Single Resistor 0.20 Single Resistor 1.40 Single Resistor 0.10 0.05 - 55 Derating www.vishay.com 3 + 25 + 70 + 125 + 150 Ambient Temperature C - 55 + 25 + 70 + 125 + 150 Ambient Temperature C For technical questions, contact: ff2aresistors@vishay.com - 55 + 25 + 70 + 125 + 150 Ambient Temperature C Document Number: 31516 Revision: 03-Mar-10 MDM (Military M83401) Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ010 and RZ020, Dual-In-Line, Molded DIP Vishay Dale PERFORMANCE CONDITIONS MAX. R (TYPICAL TEST LOTS) 1.5 x rated power, applied 1.5 h "ON" and 0.5 h "OFF" for 100 h 4 h at + 25 C ambient temperature 0.50 % R 5 cycles between - 65 C and + 125 C 0.50 % R 2.5 x rated working voltage for 5 s 0.25 % R (Char. K) 0.50 % R (Char. M) 45 min at full rated working voltage at - 65 C 0.25 % R (Char. K) 0.50 % R (Char. M) 240 h with humidity ranging from 80 % RH to 98 % RH 0.50 % R Leads immersed in + 260 C solder to within 1/16" of body for 10 s 0.25 % R Total of 18 shocks at 100 g's 0.25 % R Vibration 12 h at maximum of 20 g's between 10 Hz and 2000 Hz 0.25 % R Load Life 1000 h at + 70 C, rated power applied 1.5 h "ON", 0.5 h "OFF" for full 1000 h period 0.50 % R (Char. K) 2.00 % R (Char. M) Terminal Strength 4.5 pound pull for 30 s 0.25 % R Insulation Resistance 10 000 M (minimum) - No evidence of arcing or damage (200 VRMS for 1 min) - TEST Power Conditioning Thermal Shock Short Time Overload Low Temperature Operation Moisture Resistance Resistance to Soldering Heat Shock Dielectric Withstanding Voltage Document Number: 31516 Revision: 03-Mar-10 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 4 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1