Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified,
Type RZ010 and RZ020, Dual-In-Line, Molded DIP
www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31516
1Revision: 03-Mar-10
MDM (Military M83401)
Vishay Dale
FEATURES
•Isolated, bussed and dual terminator schematics available
•MIL-PRF-83401 qualified
•Epoxy molded construction
•All device leads are hot-solder dipped
•Available in tube pack
•TCR available in “K” (± 100 ppm/°C) or “M” (± 300 ppm/°C)
depending on style
•100 % screen tested per group A, subgroup 1 of
MIL-PRF-83401
•All devices are capable of passing the MIL-STD-202,
method 210, condition D, “Resistance to Soldering Heat”
test
Notes
(1) K = ± 100 ppm/°C; M = ± 300 ppm/°C
(2) ± 2 % standard, ± 1 % and ± 5 % available
STANDARD ELECTRICAL SPECIFICATIONS
VISHAY DALE
MODEL/
PIN NO.
MIL
STYLE
MIL
SPEC.
SHEET
SCHEMATIC
POWER RATING RESISTANCE
RANGE
Ω
TOLERANCE (2)
± %
TEMPERATURE
COEFFICIENT (1)
(- 55 °C to + 125 °C)
± ppm/°C
WEIGHT
g
ELEMENT
P70 °C
W
PACKAGE
P70 °C
W
MDM14 RZ010 01
01 (B) 0.10 1.30 10 to 1M
1, 2, 5 100, 300 1.303 (A) 0.20 1.40 10 to 1M
05 (J) 0.05 1.20 Consult factory
MDM16 RZ020 02
01 (B) 0.10 1.50 10 to 1M
1, 2, 5 100, 300 1.503 (A) 0.20 1.60 10 to 1M
05 (J) 0.05 1.40 Consult factory
MI L STYLE SPEC SHEET RESIST ANCE TO LERANCE SCHEMA TIC PA CKAGIN G
CHARACTERISTIC
V ALU E
M83401 01 = 14 pin K = 100 ppm 3 digit significant F = ± 1 % A = Isolated D04 = Tin/lead, tube
DSL = Tin/lead, tube,
single lot date code
02 = 16 pin M = 300 ppm figure, followed G = ± 2 % B = Bussed
by a multiplier J = ± 5 %
10R0 = 10 Ω
3302 = 33 kΩ
1004 = 1 MΩ
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: M8340101M2201GBD04 (preferred part numbering format)
M 8 34 01 01 M2 20 1G BD 0 4
Historical Part Number example: M8340101M2201GB (will continue to be accepted)
M83401 01 M2201 G D04
MIL STYLE SPEC SHEET CHARACTERISTIC TOLERANCE SCHEMATIC PACKAGING
RESISTANCE
VALUE
New Global Part Numbering: M8340102KA001GJD04 (preferred part numbering format)
M8 34 01 02 KA 0 0 1G JD 04
Historical Part Number example: M8340102KA001GJ (will continue to be accepted)
M83401 02 K A001 GD04
MI L STYLE SPEC SHEET CHARACTERISTIC TO LERANCE SCHEMA TIC PA CKAGIN G
RESIST ANCE
V ALU E
M83401 01 = 14 pin K = 100 ppm Per std. Mil. Spec F = ± 1 % J = Dual
02 = 16 pin M = 300 ppm (see Impedence G = ± 2 % terminator
codes table) J = ± 5 %
D04 = Tin/lead, tube
DSL = Tin/lead, tube,
single lot date code
B
MIL STYLE SPEC SHEET CHARACTERISTIC TOLERANCE SCHEMATIC PACKAGING
RESISTANCE
VALUE
J
Document Number: 31516 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com
Revision: 03-Mar-10 2
MDM (Military M83401)
Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified,
Type RZ010 and RZ020, Dual-In-Line, Molded DIP Vishay Dale
DIMENSIONS in inches (millimeters)
0.100 ± 0.010
(2.54 ± 0.254)
Non-Accumulative Tol.
“C” Spaces
A ± 0.010 (0.254)
0.075 ± 0.015
(1.91 ± 0.381)
B ± 0.010 (0.254)
0.018 ± 0.003
(0.457 ± 0.076)
0.050 ± 0.005
(1.27 ± 0.127)
TYP 0.030
(0.762)
0.130 + 0.015
- 0.005
(3.30 + 0.381
- 0.127)
0.120 ± 0.005
(3.05 ± 0.127)
Pin #1
Identification
Pin #1
0.290 Min.
0.320 Nom.
0.360 Max.
(7.37 Min.
8.13 Nom.
9.14 Max.)
0.010 + 0.005
- 0.002
(0.254 + 0.127
- 0.051)
0.250 ± 0.005
(6.35 ± 0.127)
0.310 ± 0.010
(7.87 ± 0.254)
VISHAY DALE MODEL A B C
MDM14 0.750 (19.05) 0.600 (15.24) 6
MDM16 0.850 (21.59) 0.700 (17.78) 7
IMPEDANCE CODES
CODE R1 (Ω) R2 (Ω)CODE R1 (Ω) R2 (Ω)
A001 82 130 A010 330 470
A002 120 200 A011 330 680
A003 130 210 A012 1.5K 3.3K
A004 160 260 A013 3K 6.2K
A005 180 240 A014 180 270
A006 180 390 A015 270 270
A007 220 270 A016 560 560
A008 220 330 A017 560 1.2K
A009 330 390 A018 620 2.7K
TECHNICAL SPECIFICATIONS
PARAMETER UNIT MDM SERIES
Maximum Operating Voltage VDC 100
Voltage Coefficient of Resistance Veff < 50 ppm
Dielectric Strength VAC 200 per min
Insulation Resistance Ω10 000 M
Operating Temperature Range °C - 55 to + 125
Storage Temperature Range °C - 55 to + 150
MECHANICAL SPECIFICATIONS
Marking Resistance to Solvents Permanency testing per MIL-PRF-83401
Solderability Per MIL-PRF-83401
Body Molded epoxy
Terminals Copper alloy, hot-solder dipped
www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31516
3Revision: 03-Mar-10
MDM (Military M83401)
Vishay Dale Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified,
Type RZ010 and RZ020, Dual-In-Line, Molded DIP
CIRCUIT APPLICATIONS
01 SCHEMATIC MDM1401 (M8340101xxxxxxB)
MDM1601 (M8340102xxxxxxB)
13 or 15 resistors with one pin common
The MDMxx01 provides the user with a choice of 13 or 15 nominally
equal resistors, each connected to a common pin. Commonly used in
the following applications:
• MOS/ROM Pull-up/Pull-down • TTL Input Pull-down
• Open Collector Pull-up • Digital Pulse Squaring
• “Wired OR” Pull-up • TTL Unused Gate Pull-up
• Power Driven Pull-up • High Speed Parallel Pull-up
03 SCHEMATIC MDM1403 (M8340101xxxxxxA)
MDM1603 (M8340102xxxxxxA)
7 or 8 isolated resistors
The MDMxx03 provides the user with a choice of 7 or 8 nominally
equal resistors, with each resistor isolated from all others. Commonly
used in the following applications:
• “Wired OR” Pull-up • Long-line Impedance Balancing
• Power Driven Pull-up • LED Current Limiting
• Power Gate Pull-up • ECL Output Pull-down
• Line Termination • TTL Input Pull-down
05 SCHEMATIC
MDM1405 (M8340101xxxxxxJ)
MDM1605 (M8340102xxxxxxJ)
12 or 14 resistor pairs
The MDMxx05 provides the user with a choice of 12 or 14 pairs of
R1/R2 resistor values for pulse squaring and TTL dual-line
terminating requirements.
CAGE CODE: 91637
Single Resisto r
1.50
1.30
1.00
0.10
- 55 + 25 + 70 + 125 + 150
Derating Ambient Temperature °C
Power Rating (W)
MDM 14
MDM 16
01
S
chematic
Single Resisto r
1.60
1.40
1.00
0.20
- 55 + 25 + 70 + 125 + 150
Ambient Temperature °C
Power Rating (W)
MDM 14
MDM 16
03
S
chematic
Single Resistor
1.20
1.40
1.00
0.05
- 55 + 25 + 70 + 125 + 150
Ambient Temperature °C
Power Rating (W)
MDM 14
MDM 16
05
S
chematic
•••••
•
••
Pin #1
MDM1401
MDM1601
MDM1603
MDM1403
Pin #1
MDM1405, MDM1605
Pin #1
R1 R1 R1 R1 R1 R1 R1
R2 R2 R2 R2 R2
R2R2
R1 R1 R1 R1 R1 R1 R1
R2R2R2 R2 R2 R2 R2
Document Number: 31516 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com
Revision: 03-Mar-10 4
MDM (Military M83401)
Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified,
Type RZ010 and RZ020, Dual-In-Line, Molded DIP Vishay Dale
PERFORMANCE
TEST CONDITIONS MAX. ΔR (TYPICAL TEST LOTS)
Power Conditioning 1.5 x rated power, applied 1.5 h “ON” and 0.5 h “OFF”
for 100 h ± 4 h at + 25 °C ambient temperature ± 0.50 % ΔR
Thermal Shock 5 cycles between - 65 °C and + 125 °C ± 0.50 % ΔR
Short Time Overload 2.5 x rated working voltage for 5 s ± 0.25 % ΔR (Char. K)
± 0.50 % ΔR (Char. M)
Low Temperature Operation 45 min at full rated working voltage at - 65 °C ± 0.25 % ΔR (Char. K)
± 0.50 % ΔR (Char. M)
Moisture Resistance 240 h with humidity ranging from 80 % RH to 98 % RH ± 0.50 % ΔR
Resistance to Soldering Heat Leads immersed in + 260 °C solder to within 1/16" of body for 10 s ± 0.25 % ΔR
Shock Total of 18 shocks at 100 g's ± 0.25 % ΔR
Vibration 12 h at maximum of 20 g's between 10 Hz and 2000 Hz ± 0.25 % ΔR
Load Life 1000 h at + 70 °C, rated power applied 1.5 h “ON”,
0.5 h “OFF” for full 1000 h period
± 0.50 % ΔR (Char. K)
± 2.00 % ΔR (Char. M)
Terminal Strength 4.5 pound pull for 30 s ± 0.25 % ΔR
Insulation Resistance 10 000 MΩ (minimum) -
Dielectric Withstanding Voltage No evidence of arcing or damage (200 VRMS for 1 min) -
Document Number: 91000 www.vishay.com
Revision: 11-Mar-11 1
Disclaimer
Legal Disclaimer Notice
Vishay
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
