AT C 5 2 0 L B R O A D B A N D M U L T I L AY E R C A PA C I T O R S ATC 520L Broadband Multilayer Capacitors Features: * EIA 0402 Case Size * Operating Frequency 160 KHz to 16 GHz * Insertion Loss: 1 dB max. * Low Loss X7R Dielectric * Solderable SMT Terminations Advantages: ATC, the industry leader, is introducting the new 520L Series Multilayer Broadband Capacitor. This device provides low insertion loss performance over multiple octaves of frequency spectrum. The 520L capacitor is compatible with high speed automated pick and place SMT manufacturing. * Broadband Performance * Low Insertion Loss * Flat Frequency Response * Excellent Return Loss through 16 GHz * Unit-to-Unit Performance Repeatability The 520L is ideal for broadband DC blocking, coupling, bypassing, and feedback applications in optical communications systems and equipment using high-speed digital logic. * Rugged Ceramic Construction 520L Return Loss (S11) 520L Insertion Loss (S21) 0 0 -0.2 -10 -0.4 Magnitude dB Magnitude dB -0.6 -0.8 -1 -1.2 -1.4 -20 -30 -40 (Typical) -1.6 (Typical) -1.8 -50 -2 0 2 4 6 8 10 12 14 16 -60 0 2 4 Frequency (GHz) 6 8 10 12 14 16 Frequency (GHz) ATC 520L Data Sheet Test Condition Description All testing performed on 10-mil-thick Rogers RO4350 microstrip board, with the UUT subtending a 24 mil gap in a 22-mil-wide center trace (nominal 50-ohm characteristic impedance). Measurements were made using an Anritsu 3680K Universal Test Fixture and an HP8722D Vector Network Analyzer having a four-receiver architecture. Measurements have been de-embedded to the edges of the UUT using a standard TRL calibration procedure. ATC 001-988 Rev. B; 10/06 AT C 5 2 0 L B R O A D B A N D M U L T I L AY E R C A PA C I T O R S Mechanical Dimensions Electrical Specifications: * Capacitance: 10 nF * Rated Voltage: 16 WVDC * Dielectric Withstanding Voltage (DWV): 250% of rated WVDC for 5 secs. * Operating Temperature Range: -55C to +125C * Temperature Coefficient of Capacitance (TCC): 15% (-55C to +125C) * Maximum DF: 3% @ 1KHz * Insulation Resistance: 1011 min. @ +25C @ rated WVDC 1010 min. @ +125C @ rated WVDC Life Test: * MIL-STD-202, Method 108, for 2000 hours, @ 125 C with 200% WVDC applied ATC 520 Series Part Number Code The above part number refers to a 520 Series (case size L) 10 nF capacitor, K tolerance (10%), with T termination (tin plated over nickel barrier, RoHS compliant), 16 WVDC, tape and reel packaging. ATC accepts orders for our parts using designations with or without the "ATC" prefix. Both methods of defining the part number are equivalent, i.e., part numbers referenced with the "ATC" prefix are interchangeable to parts referenced without the "ATC" prefix. Customers are free to use either in specifying or procuring parts from American Technical Ceramics. For additional information and catalogs contact your ATC representative or call direct at (+1-631) 622-4700. Consult factory for additional performance data. Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document #001-992 Rev. B 12/05). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product line without prior notice. (c) 2003 American Technical Ceramics. All Rights Reserved. ATC 001-988 Rev. B; 10/06