Surface Mount Fast Switching Diode Features: * * * * * Ultra-Small Surface Mount Package Fast Switching Speed For General Purpose Switching Applications High Conductance Also Available in Lead Free Version Max. Rating @ Ta = 25C unless otherwise specified Parameter Symbol Limits Unit Peak repetitive reverse voltage Vrrm 85 V Working peak reverse voltage Vrms 85 V DC blocking voltage Vr 85 V RMS reverse voltage Vr(rms) 60 V Forward continuous current (Max.) Single diode loaded Both diodes loaded Ifm 155 75 mA Repetitive peak forward current Ifrm 500 mA Non-repetitive peak forward surge current @t =1s @t = 1ms @t = 1s Ifsm Power dissipation Pd 150 mW Rja 833 C/W Tj, Tstg -65 to +150 C Thermal resistance junction to ambient Junction and storage temperature 4 1 0.5 A Electrical Characteristics @ Ta = 25C unless otherwise specified Parameter Reverse breakdown voltage Symbol V(br)r Conditions Ir = 100uA Min. Max. Unit 85 - V - 30 2 60 100 nA A A A V Ir Vr = 25V Vr = 75V Vr = 25V, Tj = 150C Vr = 75V, Tj = 150C Forward voltage Vf If = 1mA If = 10mA If = 50mA If = 150mA - 0.715 0.855 1 1.25 Typical total capacitance Ct Vr = 0V, f = 1MHz - 1.75 pF Reverse recovery time trr If = Ir = 10mA, Irr = 0.1 x Ir, Rl = 100 - 4 ns Leakage current www.element14.com www.farnell.com www.newark.com Page <1> 25/02/13 V1.0 Surface Mount Fast Switching Diode Typical Characteristics @ Ta = 25C unless otherwise specified www.element14.com www.farnell.com www.newark.com Page <2> 25/02/13 V1.0 Surface Mount Fast Switching Diode Plastic surface mounted package Package Information Device Package Shipping BAV99T-7-F SOT-523 3,000 / Tape & Reel Part Number Table Description Part Number Surface Mount Fast Switching Diode BAV99T-7-F Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <3> 25/02/13 V1.0