c 2004 cosmo ELECTRONICS CORPORATION
http://www.cosmo-ic.com
80
1. Anode
2. Cathode
3. NC
4. MAIN TERMINAL
5. SUBSTRATE DO NOT
CONNECT
6. MAIN TERMINAL
For 115/240 Vac (rms) Application:
1. Solenoid/Valve Controls
2. Lighting Controls
3. Static Power Switches
4. ACMotor Drives
5. Temperature Controls
6. E.M. Contactors
7. ACMotor Starters
8. Solid State Relays
9. Available package : DIP/ SMD/ H.
(For Package Dimension please refer to page 82 )
Absolute Maximum Ratings (T
Electro-optical Characteristics (T
UL 1577 (File No.E169586) VDE 0884 / 0860 / 0805 (File No.101347)
SCALE 4=1
TOLERANCE :+ 0.2mm
Schematic : Top View
Parameter Symbol Rating Unit
Input Forward current IF50 mA
Peak forward current IFM 1
Reverse voltage VR6
Power dissipation PD70 mW
Output Off-State Output Terminal voltage VDRM 400 Vpeak
Peak Repetitive Surget Current ITSM 1
Power dissipation PD300 mW
Total power dissipation Ptot 330 mW
Isolation voltage 1 minute Viso 5000 Vrms
Operating temperature Topr -40 to +80
Storage temperature Tstg -40 to +125
Soldering temperature 10 seconds Tsol 260
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Input Forward voltage VFIF =10mA — 1.2 1.5 V
Peak forward voltage VFM IFM =0.5A — — 3.5 V
Reverse Leakage Current IRVR =4V — — 10 UA
Output Peak Blocking Current IDRM VDRM =Rated — — 10 A
ON-State Voltage VTM ITM =100mA — 1.6 3 V
Transfer Holding Current IH—100 — uA
charac- Critical rate of rise of OFF-state dV/dt VDRM= (1/√) *Rated 600 — — V/uS
teristics voltage
Isolation resistance Riso DC500V 5x1010 1011 — ohm
Minimum trigger current IFT Main Terminal Voltage=3V — — 5 mA
Turn-on time Ton VD =6v,RL =100 ohm,IF =20mA — — 100 uS
Outside Dimension : Unit (mm)
KMOC3023
Optoisolators Triac Driver Output
(400V Volts Peak)
2
A
V
A
-7