TaNFilm(R) Precision SIP Network Commercial and MIL Qualified High purity alumina substrate 4700 Series Sputtered tantalum nitride with passivation oxide layer * Inherent reliability * MIL-PRF-83401 qualified * Custom configuration available * Bonded leads not susceptible to solder reflow problems * Absolute tolerance to 0.1% - ratio accuracy to 0.01% * Absolute TCR to 15ppm/C - TC tracking to 5ppm/C Copper leads electroplated with gold over nickel, hot tinned leads available Lid and ceramic substrate totally filled with an epoxy adhesive Thermal compression bonded lead terminations provide exceptional reliability The IRC 4700 Series is the ultimate combination of precision performance, reliability, and long term stability in a low profile, TaNFilm(R) SIP package. Rugged welded lead construction combined with the inherent passivation characteristics of tantalum nitride insure superior ongoing performance over the installed life of the part. Visit our website to view a graphical demonstration of IRC's TaNFilm reliability and performance features. Commercial Product Capability Data Schematic Resistance Range () Absolute Tolerance Ratio Tolerance Absolute TCR (ppm/C) Tracking TCR (ppm/C) 49.9 - 99.9 F, G, J F, G 50; 100; 300 20 100 - 200 B, D, F, G, J D, F, G 25; 50; 100; 300 15 201 - 1.9K B, D, F, G, J B, D, F, G 25; 50; 100; 300 10 2.0K - 200K B, D, F, G, J A, B, D, F, G 15; 25; 50; 100; 300 5 20 - 49.9 F, G, J F, G 50; 100; 300 20 50.0 - 199 D, F, G, J B, D, F, G 25; 50; 100; 300 5 200 - 999 B, D, F, G, J A, B, D, F, G 25; 50; 100; 300 5 1.0K - 100K B, D, F, G, J T, Q, A, B, D, F, G 15; 25; 50; 100; 300 5 101K - 400K B, D, F, G, J A, B, D, F, G 15; 25; 50; 100; 300 5 49.9 - 99.9 F, G, J F, G 50; 100; 300 20 100 - 199 F, G, J D, F, G 25; 50; 100; 300 10 C G Element Power (mW) 120 F 200 120 200 - 999 B, D, F, G, J B, D, F, G 25; 50; 100; 300 5 1.0K - 200K B, D, F, G, J A, B, D, F, G 15; 25; 50; 100; 300 5 Consult factory for tighter tolerances and TCR. Custom circuits and special testing available. General Note IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC's own data and is considered accurate at time of going to print. (c) IRC Advanced Film Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com A subsidiary of TT electronics plc 4700 Series Issue October 2009 Sheet 1 of 4 TaNFilm(R) Precision SIP Network Commercial and MIL Qualified MIL-PRF-83401 QPL Capability Data Schematic Resistance Range Absolute Tolerance Element Power Size Characteristic C 100 - 100K B, F, G, J 120 6, 8, 10 M, H, K G 100 - 100K B, F, G, J 200 6, 8, 10 M, H, K Package Specification Data Schematic Package Power (mW) 6-pin 8-pin 10-pin C, F (MIL and Commercial) 600 840 1080 G (MIL) 360 480 800 G (Commercial) 600 800 1000 Temperature Range Substrate Lead Finish Noise -65C to +125C 99.6% Alumina Gold Plate (60/40 Sn/Pb available) <-30dB Voltage Rating _____ PxR not to exceed 100V Environmental Data MIL-PRF-83401 R Limits TaNFilm(R) Test Data R Test Per MIL-PRF-83401 M K H Max Typical Thermal Shock And Power Conditioning 0.7% 0.7% 0.5% 0.10% 0.02% Low Temperature Operation 0.5% 0.25% 0.1% 0.05% 0.02% Short-term Overload 0.5% 0.25% 0.1% 0.1% 0.02% Terminal Strength 0.25% 0.25% 0.1% 0.1% 0.02% Resistance To Solder Heat 0.25% 0.25% 0.1% 0.1% 0.02% Moisture Resistance 0.5% 0.5% 0.4% 0.1% 0.02% Shock 0.25% 0.25% 0.25% 0.1% 0.02% Vibration 0.25% 0.25% 0.25% 0.1% 0.02% Life 2.0% 0.5% 0.5% 0.1% 0.02% High Temperature Exposure 1.0% 0.5% 0.2% 0.1% 0.02% Low Temperature Storage 0.5% 0.25% 0.1% 0.1% 0.02% 25C Double Load 2.0% 0.5% 0.5% 0.05% 0.02% (c) IRC Advanced Film Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com 4700 Series Issue October 2009 Sheet 2 of 4 TaNFilm(R) Precision SIP Network Commercial and MIL Qualified Schematic Data Schematic C Schematic F Schematic G N = number of pins Physical Data No. Pins IRC Model Number Std Mil Spec Style Hi Rel Mil Style Dim. A 6 476X RZ070 RZ210 0.598 8 478X RZ080 RZ220 0.798 10 470X RZ090 RZ230 0.998 0.0700.010 Dim A Max 0.130+0.008/-0.010 0.1870.010 0.322 Ref 0.135 +0.015/-0.010 0.015 min Clean Lead Above Seating Plane 0.0450.015 0.0200.003 0.0500.003 0.1000.005 0.0260.003 0.0100.001 (c) IRC Advanced Film Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com 4700 Series Issue October 2009 Sheet 3 of 4 TaNFilm(R) Precision SIP Network Commercial and MIL Qualified Ordering Data - Commercial Sample Part No. SIP - 4781 - 03 - 1001 F B Model 4761 = 6-pin SIP, schematic C, gold terminations 4761SD = 6-pin SIP, schematic C, 60/40 Sn/Pb terminations 4768 = 6-pin SIP, schematic F, gold terminations 4768SD = 6-pin SIP, schematic F, 60/40 Sn/Pb terminations 4769 = 6-pin SIP, schematic G, gold terminations 4769SD = 6-pin SIP, schematic G, 60/40 Sn/Pb terminations 4781 = 8-pin SIP, schematic C, gold terminations 4781SD = 8-pin SIP, schematic C, 60/40 Sn/Pb terminations 4788 = 8-pin SIP, schematic F, gold terminations 4788SD = 8-pin SIP, schematic F, 60/40 Sn/Pb terminations 4789 = 8-pin SIP, schematic G, gold terminations 4789SD = 8-pin SIP, schematic G, 60/40 Sn/Pb terminations 4701 = 10-pin SIP, schematic C, gold terminations 4701SD = 10-pin SIP, schematic C, 60/40 Sn/Pb terminations 4708 = 10-pin SIP, schematic F, gold terminations 4708SD = 10-pin SIP, schematic F, 60/40 Sn/Pb terminations 4709 = 10-pin SIP, schematic G, gold terminations 4709SD = 10-pin SIP, schematic G, 60/40 Sn/Pb terminations Absolute TCR 01 = 100ppm/C; 02 = 50ppm/C; 03 = 25ppm/C; 11 = 15ppm/C Resistance Standard 4-digit MIL resistance code Example: 1001 = 1000; 50R0=50 Absolute Tolerance J = 5%; G = 2%; F = 1.0%; D = 0.5%; B = 0.1% Optional Ratio Tolerance to R1 F = 1.0%; D = 0.5%; C = 0.25%; B = 0.1%; A = 0.05%; Q = 0.02%, T = 0.01% Custom schematics and screening available. Screening available for non-QPL values and tolerances. Contact factory for ordering information. Ordering Data - Military (MIL-PRF-83401) Sample Part No. M83401 - 08 - H - 1002 - F - G Model M83401 = Military qualified resistor network Size 07 = RZ060 6-pin SIP 08 = RZ080 8-pin SIP 09 = RZ090 10-pin SIP 21 = RZ210 Hi-Rel 6-pin SIP 22 = RZ220 Hi-Rel 8-pin SIP 23 = RZ230 Hi-Rel 10-pin SIP Characteristic per MIL-PRF-83401 M; K; H Resistance Standard 4-digit MIL resistance code Example: 1000 = 100; 1001=1000 Absolute Tolerance Code J = 5%; G = 2%; F = 1%; B = 0.1% Schematic C; G Standard termination is gold plate. Contact factory for optional 60/40 Sn/Pb hot solder dip finish. Screening available for non-QPL values and tolerances. Contact factory for ordering information. (c) IRC Advanced Film Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com 4700 Series Issue October 2009 Sheet 4 of 4