TM11AP-88P - HIROSE Electric U.S.A., Inc.

MODULARPLUG-JACKCONNECTORS

■

GENERAL

DevelopedbyWesternElectricInc.intheU.S.,theTMSeriesaretelephoneconnectorsmanufacturedbyusunderapatent

licensefromthecompany.

ComplyingwiththeFederalCommunicationsCommission(FCC)Title47,Part68,SubpartFStandard,theTMSeriesareeasyto

operateandresistanttoharshenvironmentalconditions.TheyareavailableinavarietyofmodelsforpreventionofEMIonplugs

andjacksandformodemconversion,sotheycanbeusedfortelephones,radioequipment,andcomputer-relatedapplications.

■

FEATURES:

(1)Easytooperate.Canbelockedbyasingleoperation.

(2)Thegold-platedcontactsarehighlyresistanttoadverseenvironmentalconditions.

(3)Requireminimalspaceforinstallation,beingdesignedforlightweightandcompactsize.

(4)Avarietyofjacksareavailablesuchaswireleadtype,DIP,andEMI-protectedtomatchtherequirementsofyourequipment.

(5)Plugsareavailableforroundcablesandshieldedcablesinadditiontocopper-foilflatmulti-conductortelephonecables.

(6)Specialhandwiringtoolsforplugharnessesavailable.

(7)ModularconnectorsareavailableforRS-232Cmodemconversionforcommunicationsbetweencomputers.

(8)Eight-coreplugsandjackscomplywithISO8877Standard(ISDNinterfaceconnector)

■

MAINAPPLICATIONS

Single-linetelephones,electronickeytelephonesystems,mobiletelephones,radioequipment,intercoms,portableterminals,fax

machines,computerterminals,andmeasuringinstruments.

−−3

CL 222 TM

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

■

MODULARCONNECTORTERMINALNUMBERS

Unlessotherwisespecified,seethefiguresbelowfortheterminalnumbersoftheproduct.

■

OPENINGSIZEANDNUMBEROFCONDUCTORS(6-CONDUCTOR)

■

RECOMMENDEDSOLDERINGFORMODULARDIPCONNECTORS

Seethefiguresbelowfortherelationshipbetweentheopeningsizeandthenumberofconductorsofthejackconnectors.

Models64and62areobtainedbyremoving1pinand2pins,respectively,frombothsidesofmodel66.Fordetails,pleasecontact

usfordrawingsbecauseonlystandardmodelsareshowninthecatalogs.

●Flowsolder(automaticsolderingmachine)

Pre-heat: 90-130℃

Pre-heattime: 60secondsmaximum

Soldertemperature: 240-260℃

Solderingtime: 10secondsmaximum

●Handsoldering

Solderingirontiptemperature:350℃

Solderingtemperature: 5secondsmaximum

Solderingironoutput: 30-40W



Note:Whensoldering,usecarenottoapplyexcessiveforcetotheconnectorterminals.



●RecommendedSoldercomposition: Paste,96.5%Sn/3.0%Ag/0.5%Cu

Plug Jack

(matingface)

Model66 Model64 Model62

Contact

No.1 Contact

No.8 Contact

No.1

−−4

CL 222 TM

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

ULSTANDARDSFORMODULARCONNECTORS

TheseconnectorsmeettheUL1863Standard(forcommunicationscircuitaccessories)formodularconnectorstopreventinjuries,

andachievebetterelectrical,mechanical,andflame-resistantproperties.UL1863provides,forexample,thefollowing:

(1)Arubberprobe(φ6.9±0.5mm)insertedintotheconnectormatingfaceshallbeabletobepulledoutwithaforceof4.45N

orless.

(2)Insulatingmaterialsshallbeflame-resistant(UL94V-0).

OurmodularconnectorshaverecentlyobtainedapprovalfromULasmeetingtherequirementsoftheUL1863.

Todiscriminatethesemodularconnectorsfromnon-compliantconnectors,weadd"X"totheirpartnumbers.

OnlyjackconnectorswithstrippedterminalleadwireshavebeenapprovedbyUL.Otherconnectorsandterminalshavenotbeen

approved.

UL File No. 134282

・Fordetails,contactoursalesrepresentative

●IDENTIFICATIONOFCONNECTORSMEETINGULSTANDARDS

●ULCOVERAGE(JACKWITHLEADWIRES)

●AuthorizedULconnectors

TMIR−623K64−※※−※ TMIRX−623K64−※※−※

Authorized UL connector

TM5RE3−64 TM5RE3X−64

Authorized UL connector

Lead wire

Stripped process

Jack with lead wires

Jack

TM1RX−616B−＊＊

TM1RX−616M−＊＊

TM1RX−616P−＊＊

TM1RX−616W−＊＊

TM1RX−623K−＊＊

TM1RX−623P−＊＊

TM1RX−647A−＊＊

TM2RCX−＊＊

TM2RGX−＊＊

TM2RDX−＊＊

TM2RDAX−＊＊

TM7RX−＊＊

TMRAX−＊＊

TM11RX−＊88−＊＊

Modular plug

TM3PX

TM4PX

TM8PX

TM10PX

TM11APX−88P

TM11APAX−88P

Dip type jack

TM2REX

TM2REAX

TM3RX

TM3RAX

TM3RA1X

TM3RA1X−10＊＊

TM5RCX

TM5RE3X

TM5RFX

TM5RF1X

TM5RJ2X

TM5RJ3X

TM5RQX−14＊＊

TM5RQX−20＊＊

TM5RSAX−24＊＊

TM5RSBX−24＊＊

TM13RX

TM13RAX−10＊＊

TM11RX−5C−88

−−5

CL 222 TM

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

■

MODULARCONNECTORTERMINALNUMBERS

Unlessotherwisespecified,seethefiguresbelowfortheterminalnumbersoftheproduct.

■

OPENINGSIZEANDNUMBEROFCONDUCTORS(6-CONDUCTOR)

■

RECOMMENDEDSOLDERINGFORMODULARDIPCONNECTORS

Seethefiguresbelowfortherelationshipbetweentheopeningsizeandthenumberofconductorsofthejackconnectors.

Models64and62areobtainedbyremoving1pinand2pins,respectively,frombothsidesofmodel66.Fordetails,pleasecontact

usfordrawingsbecauseonlystandardmodelsareshowninthecatalogs.

●Flowsolder(automaticsolderingmachine)

Pre-heat: 90-130℃

Pre-heattime: 60secondsmaximum

Soldertemperature: 240-260℃

Solderingtime: 10secondsmaximum

●Handsoldering

Solderingirontiptemperature:350℃

Solderingtime: 5secondsmaximum

Solderingironoutput: 30-40W

Note:Whensoldering,usecarenottoapplyexcessiveforcetotheconnectorterminals.

●RecommendedSoldercomposition: Paste,96.5%Sn/3.0%Ag/0.5%Cu

Plug Jack

(matingface)

Model66 Model64 Model62

Contact

No.1

Contact

No.8

Contact

No.8

Contact

No.1

−−4

CL 222 TM

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

MODULARPLUGS

■Orderinginformation

TM

（1） （3）（4）（2）

4P 6− 4P

(1)IndicationfortheSeries

(2)Jacktypeidentification

3,8p------Plugforflatcables

4,10P----Plugforroundcables

11AP------- EMI-protectedplug

11AP1----- EMI-protectedslenderplug

11APA----- EMI-protectedL-shapedplug

11APA1--- EMI-protectedT-shapedplug

20P-------Single-conductorcableplug

 (φ0.4,φ0.5,φ0.65mm)

30P-------Small-diametercableplug(forAWG28)

(3)Sizeofopening

4----Forupto4singleconductors

6----Forupto6singleconductors

8----Forupto8singleconductors

(4)Numberofconductors

2P---2conductors

4P---4conductors

6P---6conductors

8P---8conductors



−−7

CL 222 TM

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

■ ProductSpecifications

Currentrating:0.5A

Item Conditions

Specification

2,4,6pos.

100Mohmsmin.

Noflashoverorinsulationbreakdown.



Noelectricaldiscontinuityof5μsmin.



Noelectricaldiscontinuityof5μsmin.



100Mohmsmin.



1Mohmsmin.

10Mohmsmin.

1.Insulationresistance

2.Withstandingvoltage



(betweenadjacentcontacts)

3.Withstandingvoltage



(betweencontactstoshield)

4.Contactresistance

5.Vibration Contact

resistance

6.Shock Contact

resistance

Contact

resistance

Contact

resistance

Insulation

resistance

Contact

resistance

Contact

resistance

Insulation

resistance

(Highhumidity)

Insulation

resistance

(Drystate)

7.Durability

(mating/un-mating)

8.

Temperature

cycle

9.Humidity

10.

SaltSpray

Note1:Includestemperaturerisecausedbycurrentflow.

Note2:Theproductinformationinthiscatalogisforreferenceonly.Pleaserequestthe

EngineeringDrawgingforthemostcurrentandaccuratedesigninformation.

100VDC

500VAC/oneminute

1500VAC/oneminute

100mA

Frequency:10to55Hz,single

amplitudeof0.75mm,1octave/

min.conduct,2hoursineach3

directions.

Accelerationof490m/s2,11ms

duration,sinehalf-wavewaveform,

3cyclesineachofthe3axes.

200cycles

Temperature:-55℃→+5℃to

+35℃→+85℃→+5℃to+35℃

Duration:30→5→30→5(Minutes)

5cycles

500hoursat40℃andhumidity

of90%to95%.

5%saltwaterfor48hours

8pos.

Operating

temperature

range

Voltagerating:125VAC

-25℃to+60℃(Note)

-25℃to+80℃(Note)

Plug

Jack

Ratings

230mohmsmax.200mohmsmax.

250mohmsmax.220mohmsmax.



−−8

CL 222 TM

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

Contactarea:1.27μmgold

plated

Terminationarea:goldplated



Tinplated

Tinplated

Part Material

Phosphorbronze

Copperalloy

Copperalloy

DIPtype

Wireleadtype

PBT

ABS

UL94V-0

Finish Remarks

Insulator

Contacts

Metalshield

Metalfitting

ModularJacks

■ Material

●

Part Material

Polycarbonate

Phosphorbronze

Copperalloy

Polycarbonate



Contactarea:1.27μmgold

plated

Color:clear

Finish Remarks

Insulator

Contacts

Metalshield

Cover

Tinplated

Note:Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineering

Drawgingforthemostcurrentandaccuratedesigninformation.

Note:Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineering

Drawgingforthemostcurrentandaccuratedesigninformation.

●ModularPlugs

−−9

CL 222 TM

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.