G 1 AMP FAST RECOVERY RECTIFIER Mi FEATURES Rating to 1000V PRV Low cost Diffused junction Low leakage Low forward voltage drop High current capability Easily cleaned with freon, alcohol, chlorothene and similar solvents e UL recognized 94V-O plastic material Mechanical Data e Case: JEDEC DO-41 e Terminals: Axial leads, solderable per MIL-STD-202, Method 208 PR1001 Thru PR1007 i Outline Drawing f 034 (,86) 028 (71) 1.0 (25.4) MIN | 205 (5.2) 160 (4.1) le 107 (2.7) 1.0 (25.4) 080 (2.0 MIN e Polarity: Color band denotes cathode e Weight: 0.012 ounce, 0.3 grams Dimensions in inches and (millimeters) Maximum Ratings & Characteristics Ratings at 25C ambient temperature unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load For capacitive load, derate current by 20% PR1001 | PR1002 | PR1003 | PR1004 | PR1005 | PR1006 | PR1007 | Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Vv Maximum RMS Voltage Vrms 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage Voc 50 100 200 400 600 800 1000 Vv Maximum Average Forward Rectified Current lay 1.0 A .375" (9.5mm) Lead Lengths @ Ta = 75C Peak Forward Surge Current @ Ty = 125C 8.3 ms Single Half-Sine-Wave, Superimposed IFsm 30 A On Rated Load (JEDEC Method) Maximum Forward Voltage At 1.0A DC Ve 1.2 Vv Maximum DC Reverse Current @ Ta = 25C Ir 5 pA At Rated DC Blocking Voltage @ Ta = 100C 100 Maximum Reverse Recovery Time ter 150 250 500 ns @ Ta = 25C (Note 1) Typical Junction Capacitance (Note 2) Cy 15 8 pF Typical Thermal Resistance (Note 3) RthJa 50 C/W Operating Temperature Range Ty -65 to +150 C Storage Temperature Range TsTG -65 to +175 C Notes: 1. Measured with Ir = 0.5A, IR = 1A, Irr = 0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC 3. Thermal resistance Junction to Ambient Collmer Semiconductor, Inc.