To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
Is Now Part of
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, afliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Afrmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
QSD2030F — Plastic Silicon Photodiode
© 2001 Fairchild Semiconductor Corporation www.fairchildsemi.com
QSD2030F Rev. 1.3 1
August 2016
QSD2030F
Plastic Silicon Photodiode
Features
PIN Photodiode
Package Type: T-1 3/4 (5 mm Lens Diameter)
Wide Reception Angle: 40°
Daylight Filter
Package Material and Color: Black Epoxy
High Sensitivity
Peak Sensitivity λ= 880 nm
Radiant Sensitive Area: 1.245 mm x 1.245 mm
Ordering Information
Part Number Operating Temperature Package Packing Method
QSD2030F -40 to +100°C T-1 3/4 Bulk
CATHODE
ANODE
Schematic
QSD2030F — Plastic Silicon Photodiode
© 2001 Fairchild Semiconductor Corporation www.fairchildsemi.com
QSD2030F Rev. 1.3 2
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be opera-
ble above the recommended operating conditions and stressing the parts to these levels is not recommended. In addi-
tion, extended exposure to stresses above the recommended operating conditions may affect device reliability. The
absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise specified.
Notes:
1. RMA flux is recommended.
2. Methanol or isopropyl alcohols are recommended as cleaning agents.
3. Soldering iron tip 1/16 inch (1.6 mm) minimum from housing.
4. Derate power dissipation linearly 1.33 mW/°C above 25°C.
Electrical / Optical Characteristics
Values are at TA = 25°C unless specified otherwise.
Symbol Parameter Min. Unit
TOPR Operating Temperature -40 to +100
°C
TSTG Storage Temperature -40 to + 100
TSOL-I Soldering Temperature (Iron)(1,2,3) 240 for 5 s
TSOL-F Soldering Temperature (Flow)(1,2) 260 for 10 s
VBR Reverse Breakdown Voltage 50 V
PDPower Dissipation(4) 100 mW
Symbol Parameter Test Conditions Min. Typ. Max. Units
PS Peak Sensitivity Wavelength 880 nm
SR Wavelength Sensitivity Range 700 1100 nm
Reception Angle ±20 o
VFForward Voltage IF = 80 mA 1.3 V
IDReverse Dark Current VR = 10 V, Ee = 0 10 nA
ILReverse Light Current Ee = 0.5 mW/cm2,
VR = 5 V, = 950 nm 15 25 A
VOOpen Circuit Voltage Ee = 0.5 mW/cm2,
= 880 nm 420 mV
TCVTemperature Coefficient of VO+0.6 mV/K
ISC Short Circuit Current Ee = 0.5 mW/cm2,
= 880 nm 50 A
TCITemperature Coefficient of ISC +0.3 %/K
C Capacitance VR = 0, f = 1 MHz, Ee = 0 15 pF
trRise Time VR = 5 V, RL = 50 ,
= 950 nm
5ns
tfFall Time 5
QSD2030F — Plastic Silicon Photodiode
© 2001 Fairchild Semiconductor Corporation www.fairchildsemi.com
QSD2030F Rev. 1.3 3
Typical Performance Characteristics
Figure 1. Reverse Light Current vs. Emitter Output
Power Figure 2. Angular Response
Figure 3. Capacitance vs. Reverse Voltage Figure 4. Dark Current vs. Reverse Voltage
0 5 10 15 20 25 30 35 40 45 50
0
2
4
6
8
10
12
14
16
18
20
22
24
CJ- JUNCTION CAPACITANCE (pF)
VR- REVERSE BIAS VOLTAGE (V)
f=1MHz
QSD2030F — Plastic Silicon Photodiode
© 2001 Fairchild Semiconductor Corporation www.fairchildsemi.com
QSD2030F Rev. 1.3 4
Physical Dimensions
Figure 5. T-1 3/4, 5 MM LED (ACTIVE)
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notic e. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor represe ntative to verify or
obtain the most recent revision. Package specifica tions do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the
warranty therein, which covers Fairchild produ cts.
Always visit Fairchild Semiconduct or’s online packaging are a for the most recent package drawings :
http://www.fairchildsemi.com/packaging/.
For current tape an d reel specifications, visit Fair child Semiconductor’s online pac kaging area:
http://www.fairchildsemi.com/packing_dwg/PKG-DBD111A-LOCZ.pdf.
Notes:
1.Dimensions for all drawings are in inches (mm).
2.Tolerance of ±0.010 (0.25) on all non-nominal dimensions unless otherwise specified.
0.195 (4.95)
0.040 (1.02)
NOM
0.100 (2.54)
NOM
0.050 (1.25)
0.800 (20.3)
MIN
0.305 (7.75)
0.240 (6.10)
0.215 (5.45)
0.020 (0.51)
SQ. (2X)
REFERENCE
SURFACE
CATHODE
T-1 3/4
© Fairchild Semiconductor Corporation www.fairchildsemi.com
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.
AccuPower¥
AttitudeEngine™
Awinda
®
AX-CAP
®
*
BitSiC¥
Build it Now¥
CorePLUS¥
CorePOWER¥
CROSSVOLT¥
CTL¥
Current Transfer Logic¥
DEUXPEED
®
Dual Cool™
EcoSPARK
®
EfficientMax¥
ESBC¥
Fairchild
®
Fairchild Semiconductor
®
FACT Quiet Series¥
FACT
®
FastvCore¥
FETBench¥
FPS¥
F-PFS¥
FRFET
®
Global Power Resource
SM
GreenBridge¥
Green FPS¥
Green FPS¥ e-Series¥
Gmax¥
GTO¥
IntelliMAX¥
ISOPLANAR¥
Making Small Speakers Sound Louder
and Better™
MegaBuck¥
MICROCOUPLER¥
MicroFET¥
MicroPak¥
MicroPak2¥
MillerDrive¥
MotionMax¥
MotionGrid
®
MTi
®
MTx
®
MVN
®
mWSaver
®
OptoHiT¥
OPTOLOGIC
®
OPTOPLANAR
®
®
Power Supply WebDesigner¥
PowerTrench
®
PowerXS
Programmable Active Droop¥
QFET
®
QS¥
Quiet Series¥
RapidConfigure¥
¥
Saving our world, 1mW/W/kW at a time™
SignalWise¥
SmartMax¥
SMART START¥
Solutions for Your Success¥
SPM
®
STEALTH¥
SuperFET
®
SuperSOT¥-3
SuperSOT¥-6
SuperSOT¥-8
SupreMOS
®
SyncFET¥
Sync-Lock™
®*
TinyBoost
®
TinyBuck
®
TinyCalc¥
TinyLogic
®
TINYOPTO¥
TinyPower¥
TinyPWM¥
TinyWire¥
TranSiC¥
TriFault Detect¥
TRUECURRENT
®
*
PSerDes¥
UHC
®
Ultra FRFET¥
UniFET¥
VCX¥
VisualMax¥
VoltagePlus¥
XS
Xsens™
௝❺
®
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. TO OBTAIN THE LATEST, MOST UP-TO-DATE DATASHEET AND PRODUCT INFORMATION, VISIT OUR
WEBSITE AT HTTP://WWW.FAIRCHILDSEMI.COM. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF
ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF
OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE
WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.
AUTHORIZED USE
Unless otherwise specified in this data sheet, this product is a standard commercial product and is not intended for use in applications that require extraordinary
levels of quality and reliability. This product may not be used in the following applications, unless specifically approved in writing by a Fairchild officer: (1) automotive
or other transportation, (2) military/aerospace, (3) any safety critical application including life critical medical equipment – where the failure of the Fairchild product
reasonably would be expected to result in personal injury, death or property damage. Customers use of this product is subject to agreement of this Authorized Use
policy. In the event of an unauthorized use of Fairchild’s product, Fairchild accepts no liability in the event of product failure. In other respects, this product shall be
subject to Fairchild’s Worldwide Terms and Conditions of Sale, unless a separate agreement has been signed by both Parties.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,
under Terms of Use
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their
parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed
applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the
proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild
Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors
are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical
and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise.
Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change
in any manner without notice.
Preliminary First Production
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make
changes at any time without notice to improve the design.
Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only.
Rev. I77
®
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/PatentMarking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 8002829855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81358171050
www.onsemi.com
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 3036752175 or 8003443860 Toll Free USA/Canada
Fax: 3036752176 or 8003443867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC