EML15 Series AC-DC Power Supplies 15 Watts * Compact Size * Medical Approvals * Single Outputs from 3.3 to 48 V * PCB Mount, Open Frame & Chassis Mount * Encapsulated PCB & Chassis Mount * Class II * Peak Load Capability * 3 Year Warranty Dimensions: The EML15 is a series of open frame and encapsulated AC-DC single output power supplies designed for medical applications. The series provides a number of flexible mechanical options including PCB mount, open frame, chassis mount with screw terminals and a DIN Rail option. With approvals to world-wide medical safety standards, compliance with class B for both conducted and radiated emissions and a 130%, 30s peak load capability, these class II isolation parts benefit system designers with easy integration into the latest healthcare products and applications. EML15: (-P ): 2.44 x 1.21 x 0.95" (62.0 x 30.7 x 24.1 mm) (-T ): 3.10 x 1.25 x 0.91" (78.7 x 31.8 x 23.1 mm) (-E ): 2.56 x 1.31 x 0.96" (65.0 x 33.3 x 24.4 mm) (-S): 3.30 x 1.36 x 1.04" (84.0 x 34.5 x 26.4 mm) Models & Ratings Output Power Output Current Output Voltage Nominal Efficiency Peak (1) Model Number (2,3) 10 W 3.3 VDC 3.00 A 3.90 A 75% EML15US03 15 W 5.0 VDC 3.00 A 3.90 A 78% EML15US05 15 W 9.0 VDC 1.67 A 2.17 A 80% EML15US09 15 W 12.0 VDC 1.25 A 1.62 A 80% EML15US12 15 W 15.0 VDC 1.00 A 1.30 A 80% EML15US15 15 W 24.0 VDC 0.63 A 0.82 A 82% EML15US24 15 W 36.0 VDC 0.42 A 0.54 A 82% EML15US36 15 W 48.0 VDC 0.32 A 0.41 A 82% EML15US48 Notes 1. Peak load lasting <30 s with a maximum duty cycle of 10%, average output power not to exceed nominal. 2. Add suffix to model number to define type: add `-P' for PCB mount, add `-T' for chassis mount, add `-E' for encapsulated, add `-S' for screw terminals. 3. A Screw terminal version (-S) is available with DIN clip attached, add suffix `D', e.g. EML15US24-SD, DIN rail mounting kit is available as a seperate item, order code ECL15 DIN CLIP. Summary Characteristic Input Voltage Range Minimum Maximum Units 85 Typical 264 VAC 120 370 VDC No Load Input Power 1 Efficiency 75 Operating Temperature -20 80 Notes & Conditions 0.3 W 82 % See Models & Ratings table +70 C Derate linearly from 100% at +50 C to 50% at +70 C EMC EN55032 Level B Conducted & Radiated, EN61000-4, EN61000-3, EN60601-1-2 Safety Approvals EN60601-1, ANSI/AAMI ES60601-1. IEC60601-1 www.xppower.com EML15 Series AC-DC Power Supplies Input Characteristic Input Voltage Range Input Frequency Minimum Maximum Units 85 264 VAC 120 370 VDC 47 63 Input Current - Full Load Typical 0.32/0.16 No Load Input Power Hz A rms 0.3 Inrush Current At 115/230 VAC W 20/40 A Earth Leakage Current Input Protection Notes & Conditions At 115/230 VAC Class II construction no earth F2.0A/250 V internal fuse fitted in line and neutral Output Characteristic Minimum Output Voltage 3 Typical Maximum Units Notes & Conditions 48 VDC See Models and Ratings table Initial Set Accuracy 1 % Output Voltage Adjustment 5 % Not encapsulated units A No minimum load required Minimum Load 0 Start Up Delay Start Up Rise Time Hold Up Time 2 s 14 ms 12 ms Line Regulation 0.5 % Load Regulation 1 % Transient Response 4 % Ripple & Noise Overvoltage Protection Overload Protection at full load and 115 VAC Deviation, recovery within 1% in less than 500 s for a 25% load change 50 mV pk-pk 3.3-5 V versions, 20 MHz bandwidth 120 mV pk-pk 12-15 V versions, 20 MHz bandwidth 24-48 V versions, 20 MHz bandwidth 200 mV pk-pk 195 216 % Vnom 3.3 V versions, recycle input to reset 115 130 % Vnom All other versions, recycle input to reset 120 150 % 0.05 %/C Short Circuit Protection Trip & Restart (hiccup mode) Temperature Coefficient General Characteristic Efficiency Isolation: Input to Output Minimum Typical Maximum Units 75 80 82 % 4000 Power Density kHz 4.8 Mean Time Between Failure Weight See Models & Ratings table VAC 70 Switching Frequency Notes & Conditions W/in3 PCB Mount version >400 kHrs MIL-HDBK-217F, +25 C GB 0.07 (35) lb (g) Open frame versions 0.20 (90) lb (g Encapsulated version 0.24 (110) lb (g Screw terminal version Environmental Characteristic Maximum Units Operating Temperature Minimum -20 Typical +70 C Storage Temperature -40 +85 C 95 %RH 3048 m Cooling Humidity Operating Altitude Notes & Conditions Derate linearly from 100% at +50 C to 50% at +70 C Convection-cooled Shock IEC68-2-27, 30 g, 11 ms half sine, 3 times in each of 6 axes Vibration IEC68-2-6, 2 g, 10 Hz to 500 kHz, 10 mins/cycle, 60 mins each cycle www.xppower.com Non-condensing 2 EML15 Series AC-DC Power Supplies EMC: Emissions Phenomenon Standard Test Level Conducted EN55032/11 Class B Radiated EN55032/11 Class B Harmonic Current EN61000-3-2 Voltage Flicker EN61000-3-3 Criteria Notes & Conditions Class A EMC: Immunity Phenomenon Test Level Criteria EN61000-4-2 4 A Radiated EN61000-4-3 10 V/m A EFT EN61000-4-4 3 A A ESD Standard Surges EN61000-4-5 3 Conducted EN61000-4-6 10 Vrms A Magnetic Fields EN61000-4-8 10 A/m A EN60601-1-2 Dips and Interruptions EN60601-1-2 4th Ed 70% UT for 500 ms A 40% UT for 100 ms A <5% UT for 10 ms A <5% UT for 5000 ms B 70% UT for 500 ms A 0% UT for 20 ms A 0% UT for 5000 ms B Notes & Conditions 80% mod 40% of UT dip is performance criteria A if load is reduced to 45% based on 100 VAC Safety Approvals 3 Safety Agency Safety Standard Notes & Conditions CB Report IEC60601-1 Ed 3 Including Risk Management Medical UL ANSI/AAMI ES60601-1:2005 & CSA C22.2, No.60601-1:08 Medical TUV EN60601-1/A12:2006 Medical Means of Protection Category Primary to Secondary 2 x MOPP (Means of Patient Protection) IEC60601-1 Ed 3 www.xppower.com EML15 Series AC-DC Power Supplies Mechanical Details Open Frame - PCB Mount (-P) Encapsulated (-E) 0.50 (12.6) 2.44 (62.0) -Vo -Vo ACN 1.21 (30.7) +Vo 0.69 (17.5) ACL 0.06 (1.6) 1.31 (33.3) 0.79 (20.1) 4x o 0.04 (o1.0) 0.39 (10.0) Screw Terminal (-S) 0) 3.2 -Vout +Vout 2.95 (75.0) 1.25 (31.8) Pin1 Pin2 Pin3 Pin4 6( 0.950 (24.13) NP ACL 2 0.1 0.150 (3.81) 4- Pin1: 0.21 (5.4) 0.96 (24.4) 0.78 (20.0) max Open Frame - Chassis Mount (-T) Pin2: 2.13 (54.1) 2.56 (65.0) 0.36 (9.1) o 0.07 (o1.8) ACN 0.79 (20.1) 0.69 (17.5) 2.13 (54.1) o 0.04 (o1.0) Pin3: +Vo V Adj. 0.15 (3.9) 0.11 (2.9) TOP VIEW ACL 0.17 (4.4) 0.15 (3.8) ACN 1.36 (34.5) TOP VIEW ACN 1.00 ACL (25.4) 4x o 0.14 (4x o 3.5) -Vo +Vo 0.44 (11.1) 0.150 (3.81) 2.54 (64.5) 0.39 (10.0) 2.800 (71.12) 3.10 (78.7) 0.12 (3.1) Max 0.79 (20.0) max 1 1.04 (26.4) 0.27 0.09 (6.8) (2.5) 3.30 (84.0) Optional DIN clip Notes 1. Dimensions in inches (mm). 2. Weight: P Version: 0.07 lbs (35 g) T Version: 0.07 lbs (35 g) E Version: 0.20 lbs (90 g) S Version: 0.24 lbs (110 g) 3. Tolerances: x.xx = 0.02 (x.x = 0.5) x.xxx = 0.01 (x.xx = 0.25) Mating Connectors (-T version only) Input Connector: JST XHP-3 Output Connector: JST XHP-4 Crimps: SXH-001T-P0.6 www.xppower.com 28 Feb 18