Noise Suppression Products/EMI Suppression Filters > AC Line Filters > Hybrid Choke Coils Data Sheet 1 AC Line Filters Hybrid Choke Coils PLY10 Series PLY10 Series Standard Winding Type c Dimensions 16 max. 3.51 17.5 max. 18 max. 130.5 o0.9 max. 100.5 (1) (4) (4) (3) [(2)] [(3)] [(1)] [(2)] (in mm) c Common Mode Insertion Loss-Frequency Characteristics c Differential Mode Insertion Loss-Frequency Characteristics 0 0 20 Insertion Loss (dB) 20 Insertion Loss (dB) PLY10AN9012R0R2 PLY10AN1121R8R2 PLY10AN1521R6R2 PLY10AN9012R0R2 PLY10AN1121R8R2 PLY10AN1521R6R2 PLY10AN2121R4R2 40 PLY10AN2821R2R2 PLY10AN4321R0R2 PLY10AN6220R8R2 PLY10AN8720R7R2 PLY10AN9920R6R2 PLY10AN1430R5R2 60 80 0.01 0.1 1 10 40 60 80 0.01 100 PLY10AN2121R4R2 PLY10AN2821R2R2 PLY10AN4321R0R2 PLY10AN6220R8R2 PLY10AN8720R7R2 PLY10AN9920R6R2 PLY10AN1430R5R2 0.1 1 10 100 Frequency (MHz) Frequency (MHz) c Rated Value (p: packaging code) Part Number Common Mode Inductance (min.) Normal Mode Inductance (min.) Rated Current Rated Voltage PLY10AN9012R0R2p 0.9mH 65H 2.0A 300Vac PLY10AN1121R8R2p 1.1mH 90H 1.8A 300Vac PLY10AN1521R6R2p 1.5mH 110H 1.6A 300Vac PLY10AN2121R4R2p 2.1mH 150H 1.4A 300Vac PLY10AN2821R2R2p 2.8mH 190H 1.2A 300Vac PLY10AN4321R0R2p 4.3mH 300H 1.0A 300Vac PLY10AN6220R8R2p 6.2mH 400H 0.8A 300Vac PLY10AN8720R7R2p 8.7mH 530H 0.7A 300Vac PLY10AN9920R6R2p 9.9mH 690H 0.6A 300Vac PLY10AN1430R5R2p 14.0mH 1000H 0.5A 300Vac Operating Temperature Range: -25C to 60C Winding Temperature Rise (at Rated Current): 60C (max.) Continued on the following page. oThis data sheet is applied for AC Line Filters Hybrid Choke Coils used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.7.5 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > AC Line Filters > Hybrid Choke Coils Data Sheet 2 Continued from the preceding page. PLY10 Series Sectional Winding Type c Dimensions 16 max. 3.51 17.5 max. 18 max. 130.5 o0.9 max. 100.5 (1) (4) (4) (3) [(2)] [(3)] [(1)] [(2)] (in mm) c Common Mode Insertion Loss-Frequency Characteristics c Differential Mode Insertion Loss-Frequency Characteristics 0 0 PLY10AN7012R0D2 PLY10AN1121R7D2 PLY10AN1421R4D2 PLY10AN2321R2D2 PLY10AN3521R0D2 20 Insertion Loss (dB) Insertion Loss (dB) 20 40 60 PLY10AN4420R8D2 PLY10AN8720R7D2 PLY10AN9720R6D2 PLY10AN1130R5D2 80 0.01 0.1 40 60 1 PLY10AN7012R0D2 PLY10AN1121R7D2 PLY10AN1421R4D2 PLY10AN2321R2D2 10 80 0.01 100 PLY10AN3521R0D2 PLY10AN4420R8D2 PLY10AN8720R7D2 PLY10AN9720R6D2 PLY10AN1130R5D2 0.1 1 10 100 Frequency (MHz) Frequency (MHz) c Rated Value (p: packaging code) Part Number Common Mode Inductance (min.) Normal Mode Inductance (min.) Rated Current Rated Voltage PLY10AN7012R0D2p 0.7mH 50H 2.0A 300Vac PLY10AN1121R7D2p 1.1mH 65H 1.7A 300Vac PLY10AN1421R4D2p 1.4mH 110H 1.4A 300Vac PLY10AN2321R2D2p 2.3mH 160H 1.2A 300Vac PLY10AN3521R0D2p 3.5mH 240H 1.0A 300Vac PLY10AN4420R8D2p 4.4mH 320H 0.8A 300Vac PLY10AN8720R7D2p 8.7mH 500H 0.7A 300Vac PLY10AN9720R6D2p 9.7mH 670H 0.6A 300Vac PLY10AN1130R5D2p 11.0mH 840H 0.5A 300Vac Operating Temperature Range: -25C to 60C Winding Temperature Rise (at Rated Current): 60C (max.) Continued on the following page. oThis data sheet is applied for AC Line Filters Hybrid Choke Coils used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.7.5 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > AC Line Filters > Hybrid Choke Coils Data Sheet 3 Continued from the preceding page. c Equivalent Circuit c Packaging Differential Mode Inductor (1) Code Packaging Minimum Quantity M Magazine 1800 B Box 1200 (2) (4) (3) Common Mode Inductor No polarity. c !Caution (Rating) 1. Rated Current Operating current should not exceed the rated value. Even if operating current is under the rated value, adequate ventilation is required to avoid excessive heat generated within the product (choke coil) and from surrounding heat sources. If exceeding these conditions, excessive heat may cause fumes or permanent damage to the product. Please ensure that product (choke coil) is evaluated and confirmed against the specification when it is mounted in your final assembled product. -> Winding temperature should be less than 120 degree C. *As for FKOB series winding temperature should be less than 95 degree C. Maximum allowable temperature at the surface of coil (ambient temperature + winding temperature rise) is in accordance with each safety standard applicable to final assembled product. When the temperature at winding exceeds maximum allowable temperature of safety standard, the rated current should be derated. 2. Inrush Current Inrush current should not exceed 10 times rated current within 1/4 cycle of 50/60Hz commercial power line. Inrush current should be limited to a minimum of 10 seconds after last inrush. c Notice (Soldering and Mounting) Magnetic Flux Leakage Choke coils generate small amounts of magnetic flux leakage that may adversely affect equipment operation according to component arrangement. Testing should be completed on final assembly to ensure equipment performance is not affected. c Notice (Other) Coil Humming Noise Magnetic flux generated between coil and core or between the choke coil windings creates repulsive power between the coil windings. This repulsive power causes the coil winding to vibrate and create a humming noise. The amount of hum produced by the coil is proportionate to the amount of harmonic distortion generated by the operating current. This does not influence the electrical performance of the coils, but it should be considered and tested in actual circuit application. If these conditions are exceeded, excessive heat may cause fumes or permanent damage to the component, or at worst cause ignition. oThis data sheet is applied for AC Line Filters Hybrid Choke Coils used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.7.5 http://www.murata.com/