E/H Vishay Thin Film QPL MIL-PRF-55342 Qualified Thin Film Resistor Chips FEATURES * Established reliability, "R" failure rate level SURFACE MOUNT CHIPS * High purity alumina substrate for high power ( 25 ppm/C, 0.1 ppm/C) Actual Size M55342/02 Thin Film Mil chip resistors feature all sputtered wraparound termination for excellent adhesion and dimensional uniformity. They are ideal in applications requiring stringent performance requirements. Established reliability is assured through 100 % screening and extensive environmental lot testing. Wafer is sawed producing exact dimensions and clean, straight edges. NOTE: Specification changed by DSCC from MIL-R-55342 to MIL-PRF-55342. * Wraparound termination featuring a tenacious adhesion layer covered with an electroplated nickel barrier layer for + 150 C operating conditions * Very low noise and voltage coefficient ( 25 ppm/C, 0.1 ppm/C) * Non-inductive * Laser-trimmed tolerances 0.1 % * Wraparound resistance less than 0.010 ohms typical * In-lot tracking less than 5 ppm/C * Complete MIL-testing available in-house * Antistatic waffle pack or tape and reel packaging available CONSTRUCTION Passivation Resistor Film TYPICAL PERFORMANCE Solder coating ABS Nickel barrier High Purity Alumina Substrate Adhesion layer TCR 25 TOL 0.1 STANDARD ELECTRICAL SPECIFICATIONS TEST MATERIAL Absolute TCR Absolute Tolerance Strability: R Absolute Voltage Coefficient Operating Temperature Range Storage Temperature Range Noise Shelf Life Stability SPECIFICATIONS TAMELOX 25 ppm/C to 100 ppm/C 0.1 % 0.1 % 0.5 ppm/Volt - 55 C to + 125 C - 55 C to + 150 C - 25 dB 100 ppm CONDITIONS - 55 C to + 125 C + 25 C 2000 hrs. at + 70 C 1 year at + 25 C DIMENSIONS CASE SIZE M55342/01 M55342/02 M55342/03 M55342/04 M55342/05 M55342/06 M55342/07 M55342/08 M55342/09 M55342/10 M55342/11 M55342/12 www.vishay.com 42 TERM. B B B B B B B B B B B B L 0.050 0.005 0.055 0.006 0.105 0.007 0.155 0.007 0.230 0.007 0.080 0.006 0.126 0.008 0.209 0.009 0.259 0.009 0.105 0.007 0.040 0.005 0.064 0.006 W 0.025 0.005 0.050 0.005 0.050 0.005 0.050 0.005 0.075 0.005 0.050 0.005 0.063 0.005 0.098 0.005 0.124 0.005 0.100 0.005 0.025 0.005 0.032 0.005 T 0.010 to 0.030 0.012 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.010 to 0.030 0.010 to 0.033 D 0.010 0.005 0.010 0.005 0.015 0.005 0.015 0.005 0.020 0.005 0.016 0.008 0.020 + 0.005, - 0.010 0.020 0.005 0.020 0.005 0.015 0.005 0.010 0.005 0.012 0.005 For technical questions contact thin-film@vishay.com E 0.015 0.005 0.015 0.005 0.015 0.005 0.015 0.005 0.020 0.005 0.015 0.005 0.020 + 0.005, - 0.010 0.020 0.005 0.020 0.005 0.015 0.005 0.015 0.005 0.015 0.005 Document Number: 60018 Revision: 14-Aug-06 E/H QPL MIL-PRF-55342 Qualified Thin Film Resistor Chips DIMENSIONS (continued) Vishay Thin Film D W T E L MAX. WORKING VOLTAGE M55342/01 M55342/02 M55342/03 M55342/04 M55342/05 M55342/06 M55342/07 M55342/08 M55342/09 M55342/10 M55342/11 M55342/12 40 40 40 40 40 50 100 150 200 75 25 50 POWER RATING (mW) CHARACTERISTIC E&H K 10 20 25 50 50 100 100 150 200 225 50 100 125 250 400 800 500 1000 250 500 40 40 70 70 RES. RANGE () BY CHARACTERISTICS TOLERANCE CHARACTERISTIC E, H, K (0.1 %) E (1 %, 2 %, 5 %, 10 %) H, K (1 %, 2 %, 5 %, 10 %) 100 - 130K 59 - 130K 59 - 130K 100 - 301K 49.9 - 301K 20 - 301K 100 - 649K 49.9 - 649K 10 - 649K 100 - 1M 49.9 - 1M 10 - 1M 100 - 1.75M 49.9 - 1.75M 10 - 1.75M 100 - 475K 49.9 - 475K 10 - 475K 100 - 1M 49.9 - 1M 10 - 1M 100 - 2M 49.9 - 2M 10 - 2M 100 - 3M 49.9 - 3M 10 - 3M 100 - 1M 49.9 - 1M 49.9 - 1M 100 - 71.5K 59 - 71.5K 59 - 71.5K 100 - 160K 49.9 - 160K 20 - 160K ENVIRONMENTAL TESTS MECHANICAL SPECIFICATIONS MIL-PRF-55342 VISHAY LIMITS PERFORMANCE (R ) (R ) Thermal Shock 0.1 % 0.020 % Low Temperature Operation 0.1 % 0.025 % Short Time Overload 0.1 % 0.050 % High Temperature Exposure 0.1 % 0.009 % Resistance to Bonding 0.2 % 0.006 % Moisture Resistance 0.2 % 0.004 % TCR 25 ppm/C < 15 ppm/C Life (2000 hrs at + 70 C) 0.5 % 0.0184 % Life (10 000 hrs at + 70 C) 2.0 % 0.04 % Resistive Element Tamelox Substrate Material Alumina Chip Terminations Gold over Nickel TEST Plating SN 60/40 FSCM CAGE # - 57489 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: M55342E06B1C00RTS (preferred part number format) M 5 5 3 4 2 GLOBAL MODEL TCR CHARACTERISTIC CASE SIZE M55342 E = 25 ppm/C > 100 01 = 0502 02 = 0505 03 = 1005 04 = 1505 05 = 2208 06 = 0705 07 = 1206 08 = 2010 09 = 2512 10 = 1010 11 = 0402 12 = 0603 or H = 50 ppm/C D55342 (/ 07 size only) K = 100 ppm/C E 0 TERMINATION B = solderable 6 B 1 C 0 0 OHMIC VALUE FAILURE RATE Three digits and a letter. Letter identifies tolerance, acts as multiplier and decimal locator. Multiplier Tolerance 1 1 k 1 M 0.1 % A B C 1% D E F 2% G H T 5% J K L 10 % M N P M = 1.0 % per 1000 hrs. P = 0.1 % per 1000 hrs. R = 0.01 % per 1000 hrs. C = non ER version R T S PACKAGING BS = BULK 100 Min 1 Mult WS = WAFFLE 100 Min 1 Mult TAPE AND REEL T0 = 100 Min 100 Mult T1 = 1000 Min 1000 Mult T3 = 300 Min 300 Mult T5 = 500 Min 500 Mult TF = Full Reel 2500 TS = 100 Min 1 Mult Historical Part Number example: M55342K06B5E60R (will continue to be accepted) M55342 K 06 B 5E60 R SERIES TCR CHARACTERISTIC CASE SIZE TERMINATION VALUE AND TOLERANCE FAILURE RATE Document Number: 60018 Revision: 14-Aug-06 For technical questions contact thin-film@vishay.com www.vishay.com 43 SURFACE MOUNT CHIPS CASE SIZE Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1