HRF-SW1030
Preliminary
________________________________________________________________________________________________________
Web Site: www.mysoiservices.com Honeywell
Email: mysoiservices@honeywell.com Solid State Electronics Center
12001 State Highway 55
2002 1030W Published June 2002 Page 1 Plymouth, Minnesota 55441-4799
1-800-323-8295
SP6T Absorptive RF Switch
Features
· High Isolation Of > 40 dB @ 2 GHz
· Low Insertion Loss Of 1.9 dB @ 2 GHz
· DC To 3000 MHz Operating Frequency
· Integrated CMOS Control Logic
· Integrated ESD Protection on Digital I/O
· Single Positive Supply Voltage
· Ultra Small LPCCTM Packaging
· Impedance matched for 50 Ohm systems
Product Description
The Honeywell HRF-SW1030 is a high performance
single pole six throw (SP6T) absorptive RF switch that
is ideal for use in wireless basestation and handset
applications that require minimum power and minimum
insertion loss.
The HRF-SW1030 is manufactured with Honeywell's
patented Silicon On Insulator (SOI) CMOS technology,
which provides the performance of GaAs with the
economy and integration capabilities of conventional
CMOS technology.
RF Electrical Specifications @ + 25oC
Results @ Vdd = 5.0 +/- 10%, Vss = 0 unless otherwise stated, Z0 = 50 ohms
HRF-SW1030 in LPCC™ Package
Parameter Test Condition Frequency Minimum Typical Maximum Units
Insertion Loss DC – 1.0 GHz
2.0 GHz
3.0 GHz
1.7
1.9
2.4
dB
dB
dB
Isolation DC – 1.0 GHz
2.0 GHz
3.0 GHz
54
41
33
dB
dB
dB
VSWR* DC – 0.5 GHz
0.5 – 2.0 GHz
2.0 – 3.0 GHz
1.1:1
1.4:1
1.9:1 2.1:1
Ratio
Ratio
Ratio
1dB Compression Input Power
Vss=Gnd
Vss= -3
DC – 3.0 GHz
DC – 3.0 GHz
20
27
dBm
dBm
Input IP3 Two-Tone Inputs Up To + 5 dBm
Vss= Gnd
Vss= -3
DC – 3.0 GHz
DC – 3.0 GHz
35
47
dBm
dBm
Trise, Tfall*
Ton, Toff
Transients
10% To 90%
50% Cntl To 90%/10%Rf
In-Band
10
20
10
nS
nS
mV
*By design
HRF-SW1030
Preliminary
________________________________________________________________________________________________________
Web Site: www.mysoiservices.com Honeywell
Email: mysoiservices@honeywell.com Solid State Electronics Center
12001 State Highway 55
2002 1030W Published June 2002 Page 2 Plymouth, Minnesota 55441-4799
1-800-323-8295
DC Electrical Specifications @ + 25oC
Absolute Maximum Ratings1
Package Outline Drawing
Bottom View, 24 Pin 4X4 mm LPCC
TM
Package
ASAT LPCC Marketing Outline Dwg. # GMJ00004
For more information see http://www.asat.com
Parameter Minimum Typical Maximum Units
Single VDD Supply Voltage 3.3* 5.0 5.5 V
CMOS Logic Level (0) 0 0.8 V
CMOS Logic Level (1) VDD – 0.8 VDD V
Input Leakage Current 10 uA
* Note, performance curves are for Vdd = +5.0 +/- 10%
Parameter Absolute Maximum Units
VDD +6.0 V
Vin Digital Logic 0 Vss - 0.6 V
Vin Digital Logic 1 Vdd + 0.6 V
Maximum Input Power > 35 dBm
ESD Voltage (Control Lines) 2K V
Operating Temperature Range +85 Degrees C
Storage Temperature Range +125 Degrees C
(Note 1) Operation beyond any of these parameters may cause permanent damage.
Latch-Up: Unlike conventional CMOS RF switches, Honeywell's HRF-SW1030 is immune to latch-up.
ESD Protection: Although this device contains ESD protection circuitry on all digital inputs, conventional precautions should be taken
to ensure that the Absolute Maximum Ratings are not exceeded.
HRF-SW1030
Preliminary
________________________________________________________________________________________________________
Web Site: www.mysoiservices.com Honeywell
Email: mysoiservices@honeywell.com Solid State Electronics Center
12001 State Highway 55
2002 1030W Published June 2002 Page 3 Plymouth, Minnesota 55441-4799
1-800-323-8295
Truth Table
Pin Configuration
Evaluation Circuit Board Connections
C2 C1 C0 RF Output 1 RF Output 2 RF Output 3 RF Output 4 RF Output 5 RF Output 6
0
0
0
1
1
1
0
1
1
0
0
1
1
0
1
0
1
0
RFINPUT
RFINPUT
RFINPUT
RFINPUT
RFINPUT
RFINPUT
"0" = CMOS Low, "1” = CMOS High
Note: For codes 000 and 111 all outputs are in the terminated isolation state.
Pin Function Pin Function
1 GROUND 13 GROUND
2 GROUND 14 DIGITAL GROUND
3 RFOUTPUT5 15 RFOUTPUT2
4 GROUND 16 GROUND
5 GROUND 17 GROUND
6 RFOUTPUT4 18 RFOUTPUT1
7 VDD 19 GROUND
8 C2 20 GROUND
9 C1 21 RFINPUT
10 C0 22 GROUND
11 VSS 23 GROUND
12 RFOUTPUT3 24 RFOUTPUT6
“0” = CMOS Low, “1” = CMOS High
HRF-SW1030
Evaluation Board
Top View
HRF-SW1030
Honeywell
RF Out5 RF Out1
RF Input
RF Out3
Gnd
VDD
C2
C1
C0
VSS
Digital Gnd
RF Out4 RF Out2
RF Out6
HRF-SW1030
Preliminary
________________________________________________________________________________________________________
Web Site: www.mysoiservices.com Honeywell
Email: mysoiservices@honeywell.com Solid State Electronics Center
12001 State Highway 55
2002 1030W Published June 2002 Page 4 Plymouth, Minnesota 55441-4799
1-800-323-8295
Performance Curves
Insertion Loss
Isolation
SW1030 Insertion Loss vs Frequency
-2.50
-2.00
-1.50
-1.00
-0.50
0.00
00.511.522.53
Frequency (GHz)
Inserion Loss (dB)
dB(S(2,1))[0,::]
SW1030 Isolation Vs Frequency
-100.00
-90.00
-80.00
-70.00
-60.00
-50.00
-40.00
-30.00
-20.00
-10.00
0.00
00.511.522.53
Frequency (GHz)
Isolation (dB)
dB(S(3,1))[0,::]
HRF-SW1030
Preliminary
________________________________________________________________________________________________________
Web Site: www.mysoiservices.com Honeywell
Email: mysoiservices@honeywell.com Solid State Electronics Center
12001 State Highway 55
2002 1030W Published June 2002 Page 5 Plymouth, Minnesota 55441-4799
1-800-323-8295
Return Loss
P1dB
SW1030 Return Loss Vs Frequency
-20.00
-18.00
-16.00
-14.00
-12.00
-10.00
-8.00
-6.00
-4.00
-2.00
0.00
00.511.522.53
Frequency (GHz)
Return Loss (dB)
dB(S(1,1))[0,::]
dB(S(2,2))[0,::]
dB(S(3,3))[0,::]
S22
S33
S11
SW1030 P1dB Vs Frequency
0
5
10
15
20
25
30
35
0 5 10 15 20 25 30 35
Input Power (dBm)
Outut Power(dBm)
PoutLinear
Pout 1GHz
Pout 2GHz
Pout 3 GHz
HRF-SW1030
Preliminary
________________________________________________________________________________________________________
Web Site: www.mysoiservices.com Honeywell
Email: mysoiservices@honeywell.com Solid State Electronics Center
12001 State Highway 55
2002 1030W Published June 2002 Page 6 Plymouth, Minnesota 55441-4799
1-800-323-8295
Evaluation Circuit Board
Evaluation Circuit Board Layout Design Details
Ordering Information
LPCCTM is a registered Trademark of ASAT Ltd.
Honeywell reserves the right to make changes to improve reliability, function or design. Honeywell does not assume
any liability arising out of the application or use of any product or circuit described herein; neither does it convey any
license under its patent rights nor the rights of others.
Honeywell's evaluation board provides an
easy to use method of evaluating the RF
performance of our switch. Simply connect
power, DC and RF signals to be measuring
switch performance in less than 10 minutes.
Item Description
PCB Impedance Matched Multi-Layer FR4
Attenuator HRF-SW1030 Digital Attenuator
Chip Capacitor Panasonic Model ECU-E1C103KBQ Capacitor, .01uf 0402 10% 16V
RF Connector Johnson Connectors Model 142-0701-801 SMA RF Coaxial Connector
DC Pin Mil-Max Model 800-10-064-10-001 Header Pins
HRF-SW1030 Evaluation Board
Ordering Number Product
HRF-SW1030-B
HRF-SW1030-TR
HRF-SW1030-E
Delivered In Chip Tubes
Delivered On Tape And Reel2
Engineering Evaluation Board
