Emboss Tape ACH CONNECTOR 1.2mm pitch/Disconnectable Crimp style connectors PU SH Specifications ------------------- 3 * Current rating: 2 A/ 1 to 3 circuits AC, DC (AWG #28) 1.5 A/ 4, 5 circuits AC, DC (AWG #28) * Voltage rating: 50 V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/ 10 m max. After environmental tests/ 20 m max. * Insulation resistance: 100 M min. * Withstanding voltage: 500 VAC/minute * Applicable wire: Conductor size/ AWG #32 to #28 Insulation O.D./ 0.38 to 0.63 mm 3 This ACH connector is compact and low profile type, height 1.4mm and width 4.3mm,1.2mm pitch wire-to-board connector. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. * Compliant with RoHS. * Top entry but side feed type * Connector for DC power supply * Corresponding to sucking nozzle of pick and place machine Standards----------------------- 0 Recognized E60389 1 Certified LR20812 PC board layout and Assembly layout <2, 3 circuits> 4P : 3.6 0.05 5P : 4.8 0.05 0.8 0.05 2P : 1.2 0.05 3P : 2.4 0.05 0.6 min 0.6 min 3.75 0.05 0.75 min 0.7 min 0.8 0.05 0.85 min 1.4 4.3 1.2 0.05 0.8 0.05 0.85 min 1.4 0.75 min 1.1 0.05 3.75 0.05 Connector outline Connector outline 0.6 min 0.9 0.05 Connector outline <4, 5 circuits> 1.2 0.05 <Single circuit> 1.1 0.05 3.75 0.05 0.85 min Note: 1. The above figure is the figure viewed from the connector mounting side. 2. Tolerances are non-cumulative: 0.05 mm for all centers. 3. The dimensions above should serve as a guideline. Contact JST for details. Contact Applicable wire mm2 AWG# Model No. SACH-003G-P0.2 SACH-003G-P0.2B Insulation O.D. (mm) Q'ty/reel 0.05 0.08 3028 0.5 0.63 30,000 0.0320.05 3230 0.380.5 30,000 2.95 1.45 Material and Finish 1.2 0.7 0.8 Copper alloy, nickel-undercoated, gold-plated 0.6 RoHS compliance Contact Crimping machine Crimp applicator MKS-L-10-3 SACH-003G-P0.2 AP-K2N SACH-003G-P0.2B 1 MKS-L-10-3 Applicator Dies Crimp applicator with dies MK/SACH-003-02 APLMK SACH003-02 MK/SACH-003-02 APLMK SACH003-02 ACH CONNECTOR Housing <Single circuit> <2, 3 circuits> Circuit No.1 mark Model No. 1 ACHR-01V-A-S ACHR-02V-S ACHR-03V-S ACHR-04V-A-S ACHR-05V-A-S 2 3 1.2 B A PUSH B Dimensions (mm) A B Circuits 4 5 Q'ty/ bag - 1.6 2,000 1.2 2.6 1,000 2.4 3.8 1,000 3.6 5.0 1,000 4.8 6.2 1,000 3 Material 3.5 PBT, UL94V-0, natural (white) 1.2 3.5 0.3 RoHS compliance 1.2 <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. <4, 5 circuits> ex. ACHR-02V-A-SS...natural (white) K...black 1.2 A PUSH B Circuit No.1 mark 4 0.3 1.2 3.5 Shrouded header <Single circuit> <2, 3 circuits> Circuit No.1 mark Circuits Model No. 1 BM01B-ACHSS-A-GAN-ETF BM02B-ACHSS-GAN-ETF BM03B-ACHSS-GAN-ETF BM04B-ACHSS-A-GAN-ETF BM05B-ACHSS-A-GAN-ETF 2 3 B 4 3.2 4,500 4.2 4,500 2.4 5.4 4,500 3.6 6.6 4,500 4.8 7.8 4,500 Contact: Copper alloy, nickel-undercoated, gold-plated (nickel-stripe) Housing: Heat resisting resin, UL94V-0, natural (ivory) Solder tab: Copper alloy, copper-undercoated, tin-plated (reflow treatment) 3 0.6 4.3 1.4 1.4 - 1.2 Material and Finish 4.3 0.3 RoHS compliance This product displays (LF)(SN) on a label. <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. <4, 5 circuits> Q'ty/ reel A 1.2 B 5 Dimensions (mm) A B BM02B-ACHSS-GAN-ETFS...natural (ivory) K...black A 1.2 4 4.3 1.4 B Circuit No.1 mark 0.6 2