Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 1 of 7
Device NO.: DPL-132-013 Prepared date: 07-15-2008 Prepared By: Carryll Hsu
Technical Data Sheet
Photo-link Light Transmitter Unit
PLT132F/T11
Features
• High speed signal transmission（16Mbps NRZ Signal）
• TTL interface compatible
• LED power on : must need correct Vcc & Vin
• +3~+5V single power source
• The Tail of Pin Length was changed to thinness.
• Pb Free
• The product itself will remain within RoHS compliant version.
Descriptions Descriptions
The opto-electrical component is assembled with a
660nm AlGaInP LED and a driver IC. It transforms the
electrical signal to optical signal and be transmitted by
1mm diameter plastic optical fiber.
The component is operated at +3~+5V and has good
performance at low dissipation current, steady light
output and efficient light coupling.
Applications
• Digital audio equipment
• CD player
• DVD player
Device Selection Guide
Chip Dissipation
Current (mA) Fiber Coupling Light Output
(dBm)
Material λp(nm) Operating
Voltage
(Vcc) Typ. Max. Min. Typ. Max.
AlGaInP 660 +3.0~5.0 5.5 10 -21 -- -15
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 2 of 7
Device NO.: DPL-132-013 Prepared date: 07-15-2008 Prepared By: Carryll Hsu
PLT132F/T11
Package Dimension:
Dimensions
Notes: 1.All dimensions are in millimeters.
2.General Tolerance :±0.3mm
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 3 of 7
Device NO.: DPL-132-013 Prepared date: 07-15-2008 Prepared By: Carryll Hsu
PLT132F/T11
Absolute Maximum Ratings( Ta = 25ºC)
Parameter Symbol Rating Unit
Supply Voltage Vcc -0.5 to 7 V
DC Input Voltage Vin -0.5 to Vcc+0.5 V
Storage Temperature Tstg -40 to +85 ºC
Operating Temperature Topr -25 to +80 ºC
Soldering Temperature Tsol 260*1 ºC
*1. Soldering time ≤ 10 s.
Electro-Optical Characteristics
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Operating Voltage Vcc Low Voltage 2.75 3.00 3.25 V
High Voltage 4.75 5.00 5.25 V
Peak Emission Wavelength λp 640 660 680 nm
Transmission Rate NRZ Code DC - 16 Mbps
Fiber Coupling Output Power Pf *1 -21 -18 -15 dBm
Dissipation Current Icc *1 3 - 10 mA
High Level Input Voltage VIH 2 - - V
Low Level Input Voltage VIL - - 0.8 V
Rise Time Tr - 15 17 ns
Fall Time Tf [1] ; *2 NRZ Code
VFLED = 2.0V - 15 17 ns
Low to High Delay Time tpLH *2 - - 100 ns
High to Low Delay Time tpHL *2 - - 100 ns
Pulse Width Distortion Δtw *2 -15 - 15 ns
Jitter Δtj *2 - - 15 ns
*All Plastic Optical Fiber（980/1000um）
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 4 of 7
Device NO.: DPL-132-013 Prepared date: 07-15-2008 Prepared By: Carryll Hsu
PLT132F/T11
*Circuit Layout Notice:
When power is off, it must be cut off together in Vin and Vcc pin.
If it only has Vcc power-off, LED will sure to be no output power.
Vcc Vin LED Condition
2.7~5.5V High ON
2.7~5.5V Low OFF
2.7~5.5V FLOATING OFF
FLOATING 0~Vcc OFF
Measuring Method
*1 Measuring method of optical output coupling fiber and dissipation current
PLT132 Transmitter Unit
Standard plastic optic fiber cable
GND
Vcc
Vin
0.1uF
5V
Signal
Input DC
Optical power meter
ADVANTEST Q8221
The optical power meter must be calibrated
to have the wavelength sensitivity of 660nm
( 0 dBm = 1mW)
Icc
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 5 of 7
Device NO.: DPL-132-013 Prepared date: 07-15-2008 Prepared By: Carryll Hsu
PLT132F/T11
*2 Pulse response measuring method
Standard plastic optic fiber cable
16Mbps NRZ "0101" successive signal input
Standard Receiver Unit
CH2
CH1
50%
TT
Input
tj1
Output
tj2
50%
tw = TPHL-TPLH
PHL
PLH
5V
0.1uF
PLT132 Transmitter Unit
Vin Vcc
Input
Signal
GND
r
t tf
tr = 10% --> 90% Rise Time
tf = 90% --> 10% Fall Time
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 6 of 7
Device NO.: DPL-132-013 Prepared date: 07-15-2008 Prepared By: Carryll Hsu
PLT132F/T11
RELIABILITY TEST ITEMS
Test Sample Size Number (n)
No. Item Test Condition
Hour/Cycle (Piece) Failure (c)
1 Soldering Heat 260ºC±5ºC 10 seconds 22 n=22, c=0
2 High Temp. Storage Ta=100ºC 1000hrs 22 n=22, c=0
3 Low Temp. Storage Ta=-55ºC 1000hrs 22 n=22, c=0
High Temp. &
4 Humid. Test Ta=85ºC, RH=85% 1000hrs 22 n=22, c=0
-40ºC ~~~~ 85ºC
5 Temperature Cycle (30min) (5min) (30min) 300cycle 22 n=22, c=0
-10ºC ~~~~ 100ºC
6 Thermal Shock (5min) (10sec) (5min) 300cycle 22 n=22, c=0
Vcc=5V, Ta=25℃
7 DC Operating Life Vin: DC (5V) 1000hrs 22 n=22, c=0
*Icc(mA)：Dissipation Current Attenuate Difference＜ ±20%
*Pf (Fiber Coupling Output Power)：Brightness Attenuate Difference < ±20%
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 7 of 7
Device NO.: DPL-132-013 Prepared date: 07-15-2008 Prepared By: Carryll Hsu
PLT132F/T11
Notes
1. The both sides of tube must be sealed by using transparent adhesive.
2. Above specification may be changed without notice. EVERLIGHT will reserve authority on
material change for above specification.
3. When using this product, please observe the absolute maximum ratings and the instructions for
using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any
damage resulting from use of the product that does not comply with the absolute maximum
ratings and the instructions included in these specification sheets.
4. These specification sheets include materials protected under copyright of EVERLIGHT
Corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s
consent.
EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936
Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306
Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com
