TVS Diode Arrays (SPA ® Diodes)
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/29/16
Lightning Surge Protection - SP4065
Description
Applications
The SP4065 integrates low capacitance diodes with an
additional zener diode to protect each I/O pin against ESD
and high surge events. This robust device can safely absorb
up to 20A per IEC 61000-4-5, 2nd Edition (tp=8/20μs)
without performance degradation and a minimum ±30kV
ESD per IEC 61000-4-2 International Standard. Their low
loading capacitance also makes them ideal for protecting
highspeed signal pins.
Features
• ESD, IEC 61000-4-2,
±30kV contact, ±30kV air
• EFT, IEC 61000-4-4, 40A
(5/50ns)
• Lightning, IEC 61000-4-5,
2nd Edition 20A (8/20µs)
• Low capacitance of 4.4pF
(TYP) per I/O
• Low leakage current of
1µA (MAX) at 3.3V
• AEC-Q101 qualified
• Halogen free, Lead-free
and RoHS compliant
• Moisture Sensitivity Level
(MSL - Level 1)
• LCD/LED TVs
• Desktops
• Game Consoles
• Set Top Boxes
• Notebooks
• 1Gb Ethernet
• Network Hardware
• Small Cells
Functional Block Diagram
I/O 8I/O 7I/O 6I/O 5
I/O 1I/O 2GND I/O 3I/O 4
Pinout
I/O 1
I/O 2
GND
I/O 3
I/O 4
NC
I/O 8
I/O 7
I/O 6
I/O 5
Life Support Note:
Not Intended for Use in Life Support or Life Saving Applications
The products shown herein are not designed for use in life sustaining or life saving
applications unless otherwise expressly indicated.
RoHS
Pb
GREEN
Application Example
LVDS Controller
Outside
World
CLK+
Shield GND
CLK-
A0+
A0-
A1+
A1-
A2+
A2-
Signal
Shield GND
SP4065-08ATG
LVDS Interface
SP4065 Series 3.3V 20A Diode Array
Additional Information
Datasheet Samples
Resources
TVS Diode Arrays (SPA ® Diodes)
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/29/16
Lightning Surge Protection - SP4065
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause
permanent damage to the device. This is a stress only rating and operation of the device
at these or any other conditions above those indicated in the operational sections of this
specification is not implied.
Absolute Maximum Ratings
Symbol Parameter Value Units
IPP Peak Current (tp=8/20μs) 20.0 A
PPK Peak Pulse Power (tp=8/20µs) 300 W
TOP Operating Temperature -40 to 125 ºC
TSTOR Storage Temperature -55 to 150 °C
Electrical Characteristics (TOP=25ºC)
Parameter Symbol Test Conditions Min Ty p Max Units
Reverse Standoff Voltage VRWM 3.3 V
Snap Back Voltage VSB ISB=50mA 2.8 V
Reverse Leakage Current ILEAK VR=3.3V, I/O to GND 0.5 1. 0 µA
Clamp Voltage1VC
IPP=1A, tp=8/20µs, Fwd 5.5 V
IPP=5A, tp=8/20µs, Fwd 7. 0 V
IPP=10A, tp=8/20µs, Fwd 9.0 V
IPP=20A, tp=8/20µs, Fwd 13.5 V
Dynamic Resistance RDYN (VC2 - VC1) / (IPP2 - IPP1) 0.4 Ω
ESD Withstand Voltage1VESD
IEC61000-4-2 (Contact) ±30 kV
IEC61000-4-2 (Air) ±30 kV
Diode Capacitance1CI/O-GND Reverse Bias=0V 4.4 5.0 pF
Diode Capacitance1CI/O-I/O Reverse Bias=0V 2.2 pF
Note: 1. Parameter is guaranteed by design and/or device characterization.
Thermal Information
Parameter Rating Units
Storage Temperature Range -55 to 150 °C
Maximum Junction Temperature 150 °C
Maximum Lead Temperature
(Soldering 20-40s)
260 °C
Clamping Voltage vs. IPP
0.0
2.0
4.0
6.0
8.0
10.0
12.0
14.0
3.01.05.0 7.09.0 11.013.015.017.019.021.0
Peak Pulse Current-I
PP
(A)
Clamp Voltage (V
C
)
Capacitance vs. Bias
0.0
1.0
2.0
3.0
4.0
5.0
00.5 11.5 22.5 3
Bias Voltage (V)
Capacitance (pF)
TVS Diode Arrays (SPA ® Diodes)
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/29/16
Lightning Surge Protection - SP4065
Time
Temperature
TP
TL
TS(max)
TS(min)
25
t
P
tL
tS
time to peak temperature
Preheat
P
rehea
t
Ramp-up
R
amp-up
Ramp-down
R
amp-d
o
Critical Zone
TL to TP
ritical Zon
T
L
to
T
P
Reflow Condition Pb – Free assembly
Pre Heat
- Temperature Min (Ts(min)) 150°C
- Temperature Max (Ts(max)) 200°C
- Time (min to max) (ts) 60 – 180 secs
Average ramp up rate (Liquidus) Temp (TL)
to peak 3°C/second max
TS(max) to TL - Ramp-up Rate 3°C/second max
Reflow - Temperature (TL) (Liquidus) 217°C
- Temperature (tL) 60 – 150 seconds
Peak Temperature (TP) 260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)20 – 40 seconds
Ramp-down Rate 6°C/second max
Time 25°C to peak Temperature (TP) 8 minutes Max.
Do not exceed 260°C
Soldering Parameters
Product Characteristics
Lead Plating Pre-Plated Frame
Lead Material Copper Alloy
Lead Coplanarity 0.0004 inches (0.102mm)
Substrate material Silicon
Body Material Molded Epoxy, rated UL 94 V-0
Notes :
1. All dimensions are in millimeters
2. Dimensions include solder plating.
3. Dimensions are exclusive of mold flash & metal burr.
4. Blo is facing up for mold and facing down for trim/form, i.e. reverse trim/form.
5. Package surface matte finish VDI 11-13.
Part Numbering System
Part Marking System
SP 4065 08 A T G
Series
Number of
Channels
Package
A = MSOP10
T= Tape & Reel
G= Green
-
TVS Diode Arrays
(SPA
®
Diodes)
YYWW = Date code
F
L
YYWWD
AA*8
Product Series
AA= SP4065
Number of
Channels
Assembly Site
Ordering Information
Part Number Package Marking Min. Order
Qt y.
SP4065-08ATG MSOP-10 AAH8 4000
8/20µs Pulse Waveform
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
110%
0.0 5.0 10.0 15.0 20.0 25.0 30.0
Time (μs)
Percent of I
PP
TVS Diode Arrays (SPA ® Diodes)
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/29/16
Lightning Surge Protection - SP4065
Embossed Carrier Tape & Reel Specification — MSOP-10
Millimetres Inches
Min Max Min Max
E1.65 1.85 0.065 0.073
e0.5 0.02
F5.40 5.60 0.213 0.220
D1.50 1.60 0.059 0.063
D1 1.50 Min 0.059 Min
P0 3.90 4.10 0.154 0.161
W11.70 12.30 0.460 0.484
P7.90 8.10 0.311 0.319
A0 5.20 5.40 0.205 0.213
B0 3.20 3.50 0.126 0.138
K0 1.20 1.50 0.047 0.059
t0.30 +/- 0.05 0.012+/- 0.002
User Feeding Direction
Pin 1 Location
Package Dimensions — MSOP-10
BeA1
A
21
E1 E
10
D
L
C
0.32
[0.0126]
4.24
[0.1669]
1.04
[0.0409]
5.28
[0.2079]
3.20
[0.1260]
0.50
[0.0197]
2.00
[0.0787]
Solder Pad Layout
Package MSOP
Pins 10
JEDEC MO-187
Millimeters Inches
DIM Min Max Min Max
A-1. 10 - 0.043
A1 0.00 0.15 0.000 0.006
B0.17 0.27 0.007 0.011
c0.08 0.23 0.003 0.009
D2.90 3.10 0.114 0.122
E4.67 5.10 0.184 0.200
E1 2.90 3.10 0.114 0.122
e0.50 BSC 0.020 BSC
L0.40 0.80 0.016 0.032
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Littelfuse:
SP4065-08ATG