F0311PROTECTIVECOVERFORBF - OMRON

1ZC12A~1ZC120A

2011-01-05

TOSHIBA ZENER DIODE SILICON DIFFUSED TYPE

1ZC12A~1ZC120A

CONSTANT VOLTAGE REGULATION

TELEPHONE, PRINTER USES

z Average Power Dissipation : P = 1.0W

z Zener Voltage : VZ = 12 V to 120 V

z Tolerance of Zener Voltage (VZ) : ±5%

z Plastic Mold Package

ABSOLUTE MAXIMUM RATINGS (Ta=25°C)

CHARACTERISTIC SYMBOL RATING UNIT

Power Dissipation P 1.0 W

Junction Temperature Tj −40 to 150 °C

Storage Temperature Range Tstg −40 to 150 °C

Note: Using continuously under heavy loads (e.g. the application of high

temperature/current/voltage and the significant change in

temperature, etc.) may cause this product to decrease in the

reliability significantly even if the operating conditions (i.e.

operating temperature/current/voltage, etc.) are within the

absolute maximum ratings.

Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook

(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report

and estimated failure rate, etc).

MARKING

Abbreviation Code Part No.

ZC12A 1ZC12A

JEDEC ―

JEITA ―

TOSHIBA 3−3F2A

Weight: 0.18g (Typ.)

Unit: mm

Lot No.

line indicates

lead (Pb)-free package or

lead (Pb)-free finish.

Part No. (or abbreviation code)

120A

1ZC12A~1ZC120A

2011-01-05

ELECTRICAL CHARACTERISTICS (Ta=25°C)

ZENER CHARACTERISTICS FORWARD

VOLTAGE REVERSE

CURRENT

ZENER VOLTAGE

VZ (V)

ZENER

IMPEDANCE

rd (Ω)

TEMPERATURE

COEFFICIENT

OF ZENER

VOLTAGE

αT (mV / °C) VF (V) IR (μA)

TYPE

MIN. TYP. MAX. MAX.

MEASURE-

MENT

CURRENT

IZ (mA) TYP. MAX. MAX.

MEASURE-

MENT

CURRENT

F (A) MAX

MEASURE-

MENT

VOLTAGE

R (V)

1ZC12A 11.4 12 12.6 30 10 8 13 1.2 0.2 10 8.0

1ZC13A 12.4 13 13.6 30 10 9 14 1.2 0.2 10 9.0

1ZC15A 14.3 15 15.8 30 10 11 17 1.2 0.2 10 10.0

1ZC16A 15.2 16 16.8 30 10 12 19 1.2 0.2 10 11.0

1ZC18A 17.1 18 18.9 30 10 14 23 1.2 0.2 10 13.0

1ZC20A 19.0 20 21.0 30 10 16 26 1.2 0.2 10 14.0

1ZC22A 20.9 22 23.1 30 10 18 28 1.2 0.2 10 16.0

1ZC24A 22.8 24 25.2 30 10 20 32 1.2 0.2 10 17.0

1ZC27A 25.7 27 28.3 30 10 23 36 1.2 0.2 10 19.0

1ZC30A 28.5 30 31.5 30 10 25 40 1.2 0.2 10 21.0

1ZC33A 31.4 33 34.6 30 10 26 41 1.2 0.2 10 26.4

1ZC36A 34.2 36 37.8 30 9 28 45 1.2 0.2 10 28.8

1ZC39A 37.1 39 40.9 35 8 30 48 1.2 0.2 10 31.2

1ZC43A 40.9 43 45.1 40 7 33 53 1.2 0.2 10 34.4

1ZC47A 44.7 47 49.3 65 6 38 60 1.2 0.2 10 37.6

1ZC51A 48.5 51 53.5 65 6 43 68 1.2 0.2 10 40.8

1ZC56A 53.2 56 58.8 85 5 48 77 1.2 0.2 10 44.8

1ZC62A 58.9 62 65.1 105 5 53 85 1.2 0.2 10 49.6

1ZC68A 64.6 68 71.4 120 4 57 90 1.2 0.2 10 54.4

1ZC75A 71.3 75 78.7 150 4 66 104 1.2 0.2 10 60.0

1ZC82A 77.9 82 86.1 170 3 71 113 1.2 0.2 10 65.4

1ZC91A 81.5 91 95.5 240 3 79 127 1.2 0.2 10 72.8

1ZC100A 95.0 100 105.0 300 3 87 138 1.2 0.2 10 80.0

1ZC110A 104.5 110 115.5 300 3 96 152 1.2 0.2 10 88.0

1ZC120A 114.0 120 126.0 350 2.5 106 171 1.2 0.2 10 96.0

1ZC12A~1ZC120A

2011-01-05

Handling Precaution

The absolute maximum ratings denote the absolute maximum ratings, which are rated values and must not be

exceeded during operation, even for an instant. The following are the general derating methods that we recommend

when you design a circuit with a device.

P: We recommend that the worst case power dissipation be no greater than 50% of the absolute

maximum rating of power dissipation. Carry out adequate heat design.

Tj: Derate this rating when using a device in order to ensure high reliability. We recommend that the

device be used at a Tj of below 120°C.

Thermal resistance between junction and ambient fluctuates depending on the device’s mounting condition. When

using a device, design a circuit board and a soldering land size to match the appropriate thermal resistance value.

Organic silicon is used as encapsulation material for this product, which is resin seal product. Therefore, it is

difficult to seal siloxane coming from silicone completely in this product. When using this product, please consider

above.

Please refer to the Rectifiers databook for further information.

1ZC12A~1ZC120A

2011-01-05

1ZC12A~1ZC120A

2011-01-05

RESTRICTIONS ON PRODUCT USE

• Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information

in this document, and related hardware, software and systems (collectively “Product”) without notice.

• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with

TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.

• Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are

responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and

systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily

injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the

Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of

all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes

for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the

instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their

own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such

design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,

diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating

parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR

APPLICATIONS.

• Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring

equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.

Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or

reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious

public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used

in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling

equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric

power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this

document.

• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.

• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any

applicable laws or regulations.

• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any

infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to

any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.

• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE

FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY

WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR

LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND

LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO

SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.

• Do not use or otherwise make available Product or related software or technology for any military purposes, including without

limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile

technology products (mass destruction weapons). Product and related software and technology may be controlled under the

Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product

or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.

• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.

Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,

including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of

noncompliance with applicable laws and regulations.