VT1080S-E3, VFT1080S-E3, VBT1080S-E3, VIT1080S-E3
www.vishay.com Vishay General Semiconductor
Revision: 16-Mar-18 1Document Number: 89165
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Trench MOS Barrier Schottky Rectifier
Ultra Low VF = 0.52 V at IF = 5 A
FEATURES
• Trench MOS Schottky technology
• Low forward voltage drop, low power losses
• High efficiency operation
• Meets MSL level 1, per J-STD-020, LF maximum
peak of 245 °C (for TO-263AB package)
• Solder bath temperature 275 °C maximum, 10 s,
per JESD 22-B106 (for TO-220AB, ITO-220AB,
and TO-262AA package)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
For use in high frequency converters, switching power
supplies, freewheeling diodes, OR-ing diode, DC/DC
converters and reverse battery protection.
MECHANICAL DATA
Case: TO-220AB, ITO-220AB, TO-263AB and
TO-262AA
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test
Polarity: as marked
Mounting Torque: 10 in-lbs maximum
PRIMARY CHARACTERISTICS
IF(AV) 10 A
VRRM 80 V
IFSM 100 A
VF at IF = 10 A 0.60 V
TJ max. 150 °C
Package TO-220AB, ITO-220AB,
TO-263AB, TO-262AA
Circuit configuration Single
TO-220AB
1
23
1
K
23
TO-263AB
NC
A
K
TO-262AA
TMBS
®
ITO-220AB
123
VT1080S VFT1080S
VIT1080SVBT1080S
NC
A
K
HEATSINK
PIN 1 PIN 2
PIN 3 K
PIN 1 PIN 2
PIN 3
PIN 1 PIN 2
CASE
PIN 3
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL VT1080S VFT1080S VBT1080S VIT1080S UNIT
Maximum repetitive peak reverse voltage VRRM 80 V
Maximum average forward rectified current (fig. 1) IF(AV) 10 A
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load IFSM 100 A
Non-repetitive avalanche energy at TJ = 25 °C, L = 60 mH EAS 110 mJ
Peak repetitive reverse current at tp = 2 μs, 1 kHz, TJ = 38 °C ± 2 °C IRRM 1.0 A
Isolation voltage (ITO-220AB only) from terminal to heatsink, t = 1 min VAC 1500 V
Operating junction and storage temperature range TJ, TSTG -55 to +150 °C