2N5154 Silicon NPN Transistor D a ta S h e e t Description Applications Semicoa offers: * High-speed power switching * Low power * NPN silicon transistor * Screening and processing per MIL-PRF-19500 Appendix E * JAN level (2N5154J) * JANTX level (2N5154JX) * JANTXV level (2N5154JV) * JANS level (2N5154JS) * QCI to the applicable level * 100% die visual inspection per MIL-STD-750 method 2072 for JANTXV and JANS * Radiation testing (total dose) upon request Features * * * * Hermetically sealed TO-39 metal can Also available in chip configuration Chip geometry 9201 Reference document: MIL-PRF-19500/544 Benefits * Qualification Levels: JAN, JANTX, JANTXV and JANS * Radiation testing available Please contact Semicoa for special configurations www.SEMICOA.com or (714) 979-1900 Absolute Maximum Ratings Parameter Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Collector Current, Continuous Power Dissipation, TA = 25OC Derate linearly above 25OC Power Dissipation, TC = 25OC Derate linearly above 25OC TC = 25C unless otherwise specified Symbol VCEO VCBO VEBO IC PT PT Thermal Resistance RJA RJC Operating Junction Temperature Storage Temperature TJ TSTG Copyright(c) 2006 Rev. D-2b Rating 80 100 5.5 2 1 5.7 11.8 66.7 175 15 Unit Volts Volts Volts A W mW/C W mW/C -65 to + 200 C C/W Semicoa 333 McCormick Avenue, Costa Mesa, California 92626 714.979.1900, FAX 714.557.4541 www.SEMICOA.com Page 1 of 2 2N5154 Silicon NPN Transistor D a ta S h e e t ELECTRICAL CHARACTERISTICS characteristics specified at TA = 25C Off Characteristics Parameter Symbol Collector-Emitter Breakdown Voltage V(BR)CEO Collector-Emitter Cutoff Current ICEO Collector-Emitter Cutoff Current ICEX Collector-Emitter Cutoff Current Emitter-Base Cutoff Current Test Conditions IC = 100 mA ICES1 ICES2 IEBO1 IEBO2 Base-Emitter Voltage Base-Emitter Saturation Voltage Collector-Emitter Saturation Voltage Max Units Volts 50 A 100 A 1 1 1 1 A mA A mA 80 Pulse Test: Pulse Width = 300 s, Duty Cycle 2.0% Symbol hFE1 hFE2 hFE3 hFE4 DC Current Gain Typ VCE = 40 Volts VCE = 60 Volts, VEB = 2 Volts, TA = 150C VCE = 60 Volts VCE = 100 Volts VEB = 4 Volts VEB = 5.5 Volts On Characteristics Parameter Min VBE VBEsat1 VBEsat2 VCEsat1 VCEsat2 Test Conditions IC = 50 mA, VCE = 5 Volts IC = 2.5 A, VCE = 5 Volts IC = 5 A, VCE = 5 Volts IC = 2.5 A, VCE = 5 Volts TA = -55C VCE = 5 Volts, IC = 2.5 A IC = 2.5 A, IB = 250 mA IC = 5 A, IB = 500 mA IC = 2.5 A, IB = 250 mA IC = 5 A, IB = 500 mA Min 50 70 40 25 Test Conditions VCE = 5 Volts, IC = 500 mA, f = 10 MHz VCE = 5 Volts, IC = 100 mA, f = 1 kHz VCB = 10 Volts, IE = 0 mA, f = 1 MHz Min Typ Max Units 200 1.45 1.45 2.20 0.75 1.50 Volts Max Units 250 pF 1.4 0.5 0.5 1.5 s Volts Volts Dynamic Characteristics Parameter Magnitude - Common Emitter, Short Circuit Forward Current Transfer Ratio Small Signal Short Circuit Forward Current Transfer Ratio Open Circuit Output Capacitance Symbol |hFE| hFE COBO Typ 7 50 Switching Characteristics Storage Time Fall Time Saturated Turn-On Time Saturated Turn-Off Time Copyright(c) 2006 Rev. D-2b ts tf tON tOFF IC = 5 A, IB1=IB2 = 500 mA, VBEoff = 3.7 Volts, RL = 6 Semicoa 333 McCormick Avenue, Costa Mesa, California 92626 714.979.1900, FAX 714.557.4541 www.SEMICOA.com Page 2 of 2