THIS DRAWING COVERS PROPRIETARY ITEM AND IS THE PROPERTY OF THE APM-HEXSEAL CORPORATION.
THIS DRAWING IS NOT TO BE COPIED OR USED WITHOUT THE WRITTEN APPROVAL OF AN OFFICER OF THE APM-HEXSEAL CORPORATION.
MAT'L: SILICONE RUBBER
PER ASTM D 1418
MAXIMUM AND MINIMUM MEASURE-
MENTS ARE STATED DIRECTLY ON
EACH DIMENSION.
MODIFIED
REV.
FINISH:
ADESCRIPTION
APM-HEXSEAL CORPORATION
BOOT, TOGGLE, TOTALLY
ENCLOSING (C1131/27)
TITLE:
3 : 1
DWG. NO.
CHKD.
DWN.
ENG.
SCALE
DATE
C1131/27
S. ANDREWS
BLACK
J. CELLA
SPECIFICATIONS
Material: E-SEELS:Silicone rubber polymer type ASTM D1418
Mounting Nut: E-SEELS: Brass, black-oxide
Temperature Range: E-SEELS: -80°F to +400°F
Pressure Range: Exceeds 15 psi internal and 1500 psi external.
Operational Life: 50,000 actuations (minimum).
Shelf Life: Excess of 25 years.
Resistant to: Salt spray, sunlight, ozone, weather, fungus and most
acids and lubricating oils
Agency Recognition: E-SEELS and HEXSEALS are Ul-listed to UL
Std. 50 types 1-13, and meet CSA standards.
Installation: If a reducing adaptor is required- see page 14 of
HEXSEAL catalog HEX200 for part numbers and drawing.
11.16.74
12.09.59
07.08.09
CAD COMPUTER GENERATED
B09.19.02
