EAC series
Small, common mode EMI/EMC Filters in 150kHz to 1MHz (1-Stage filter)
EAC -10 -472 -O
Ordering information
*
The dimensions change when the option is set.
Refer to External view.
1 2 3 4
Features of EAC series
Circuit Diagram Derating Curve
LINE
Case
: Mounting Plate
1
24
3
CY
CY
CY : Line to ground capacitor
LOAD
Small, common mode EMI/EMC Filters in 150kHz to 1MHz(1-Stage filter)
- Single Phase 250 VAC -Small-size
-Quick and easy push-down terminal
Just connect the wires,push-down and tighten
the screws with a screwdriver
Ambient Temperature [C]
Load Factor [%]
9050 60 70 80
20
0
-4040-30-20
100
80
60
40
55
Specifications
No. Items EAC-03-472 EAC-06-472 EAC-10-472 EAC-16-472 EAC-20-472 EAC-30-472
1Rated Voltage[V] AC 1f 250 / DC250
2 Rated Current[A] 3 6 10 16 20 30
3 Test Voltage (Terminal-Mounting Plate) 2,500 VAC (Cutoff Current = 20mA), 1minute at room temperature and humidity
4 Isolation Resistance (Terminal-Mounting Plate) 500 VDC 500MW min at room temperature and humidity
5 Leakage current 125/250V 60Hz 0.5mA/1.0mA max
6 DC resistance 180mW max 110mW max 40mW max 20mW max 10mW max 6mW max
7 Safety agency approval temperatures -25 to +85C (Refer to Derating Curve)
8 Operating temperature -40 to +85C (Refer to Derating Curve)
9 Operating humidity 20 to 95%RH (Non condensing)
10 Storage temperature/humidity -40 to +85C/20 to 95%RH (Non condensing)
11 Vibration 10 to 55Hz, 19.6m/s2 (2G), 3min. Period, 1hour each X, Y and Z axis
12 Impact 196.1m/s2 (20G), 11ms Once each X, Y and Z axis
13 Safety agency approvals UL1283, CSA C22.2 No.8 (C-UL), DIN EN60939 VDE0565 Teil3-1, ENEC (At only AC input)
14 Case size (without projection) /Weight
39X30X85 mm [1.54X1.18X3.35 inches] (WXHXD) /170g max (Option : -D refer to external view)
DIN rail installation type is optionThe terminal cover is retracted inside the unit
1 Model Name
2 Rated Current
3 Line to ground capacitor code:See table 1.1.
table1.1 Line to ground capacitor code
Code Leakage Current
(Input 125/250V 60Hz)
Line to ground
capacitor
(nominal value)
681 75.5 A/ 150 A max 680pF
102 0.13 mA/ 0.25mA max 1000pF
222 0.25
mA/
0.5 mA max 2200pF
332 0.38 mA/ 0.75mA max 3300pF
472 0.5 mA/
1.0 mA max 4700pF
* When the line to ground capacitor code is
different, the attenuation characteristic is
different.
4 Options
D
:DIN rail installation type
EA/ES-1
R
EAC,EAM,EAP series
Mounting Plate
Closed the terminal cover
Terminal cover M4
M4
2-M4
2-M4
2-f4.8
Mounting Hole
Protection Earth
Name Plate
Terminal cover
Terminal cover
Protection Earth
85
[3.35]
[2.95]
[2.83]
[0.19]
75 ±0.5
72
39
31.5 ±0.5
12.7
[0.5]
[1.24]
[1.54]
11.5
21
2.5
[0.1][0.83]
[0.45]
9.7
[0.38]
30 2
[1.18] [0.08]
Terminal
Input
Terminal
Output
Tolerance : ±1 [±0.04]
Weight : 170g max
Mounting Plate : Iron (surface finishing:nickel plating)=1.0 [0.04]
CasePBT
Dimensions in mm, [ ]=inches
Terminal block screw tightening torque M41.6Nm(16.9kgfcm)max
This product is shipped in the following condition,because it is equipped with push-down terminals.
1The terminal cover is retracted inside the unit.
2The screws for connecting the terminals are held in the up right position.
¡Note when installing the EMI/EMC
Filter on a DIN rail.
When the EMI/EMC Filter is grounded through
the DIN rail, the proper noise attenuation may not
be achieved.
Be sure to connect the protection earth (PE) of
the EMI/EMC Filter body to the earth.
It can connect the ground to either one only.
Closed the terminal cover
Mounting Plate
M4
M4
2-M4
2-M4
Protection Earth
Terminal cover
Terminal cover
Protection Earth
Terminal cover
DIN rail
Name Plate
8.5 +2
-1
85
[3.35] [0.33]
[0.1][0.83]
[0.45]
[2.83]
72
39
[1.54]
[0.5]
[1.18] [0.08]
[0.28]
[0.35] [0.38]
30 212.7
9.7
11.5
21
2.5
7
(9)
Terminal
Input
Terminal
Output
Tolerance : ±1 [±0.04]
Weight : 170g max
Mounting Plate : Iron (surface finishing:nickel plating)=1.0 [0.04]
CasePBT
Dimensions in mm, [ ]=inches
Terminal block screw tightening torque M41.6Nm(16.9kgfcm)max
Standard Type
DIN rail installation Type
Name Plate
DIN rail
External view
EA/ES-4
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Cosel:
EAC-30-332-D EAC-30-472 EAC-30-472-D EAC-30-681 EAC-30-681-D EAC-20-681-D EAC-30-102 EAC-30-102-
D EAC-30-222 EAC-30-222-D EAC-30-332 EAC-20-222-D EAC-20-332 EAC-20-332-D EAC-20-472 EAC-20-472-
D EAC-20-681 EAC-16-472-D EAC-16-681 EAC-16-681-D EAC-20-102 EAC-20-102-D EAC-20-222 EAC-16-102-
D EAC-16-222 EAC-16-222-D EAC-16-332 EAC-16-332-D EAC-16-472 EAC-10-332-D EAC-10-472 EAC-10-472-
D EAC-10-681 EAC-10-681-D EAC-16-102 EAC-06-681-D EAC-10-102 EAC-10-102-D EAC-10-222 EAC-10-222-
D EAC-10-332 EAC-06-222-D EAC-06-332 EAC-06-332-D EAC-06-472 EAC-06-472-D EAC-06-681 EAC-03-472-
D EAC-03-681 EAC-03-681-D EAC-06-102 EAC-06-102-D EAC-06-222 EAC-03-102-D EAC-03-222 EAC-03-222-
D EAC-03-332 EAC-03-332-D EAC-03-472 EAC-03-102