PRESSURE TRANSDUCERS P-2000 INTERNAL STRUCTURE (BN type) 1 3 2 5 4 Part name FEATURES O O ODIP O 9.81 981 kPa 0.1 10 kgf/cm2 OCompact and light weight OFor non-corrosive gases ODual in line package OPressure range ~9.81, ~981 kPa {~0.1, ~10 kgf/cm2} 1 2 3 4 5 Material LCP (Liquid crystal polymer) Housing Cover Aluminum Sensor chip Silicone Ceramic Chip resistor (compensatory resistor) + Phosphor bronze + Au-plated Terminal pin MODEL NUMBER DESIGNATION P-2000 - 501 G - 15 - BN Series name Terminal direction AN Rated pressure range 1010 ~ 9.81 kPa {0 ~ 0.1 kgf/cm } 5010 ~ 49.0 kPa {0 ~ 0.5 kgf/cm2} 1020 ~ 98.1 kPa {0 ~ 1 kgf/cm2} 3520 ~ 343 kPa {0 ~ 3.5 kgf/cm2} 5020 ~ 490 kPa {0 ~ 5 kgf/cm2} 7020 ~ 686 kPa {0 ~ 7 kgf/cm2} 1030 ~ 981 kPa {0 ~ 10 kgf/cm2} 2 BN Same direction as the pressure port Opposite direction to the pressure port Thermal error 15 0.15 % ( 0.12 %) F.S./C Pressure reference G Gauge Terminal direction LIST OF MODEL NUMBERS Rated pressure range kPa {kgf/cm2} AN BN 0 ~ 9.81 {0 ~ 0.1} 0 ~ 49.0 {0 ~ 0.5} 0 ~ 98.1 {0 ~ 1} 0 ~ 343 {0 ~ 3.5} 0 ~ 490 {0 ~ 5} 0 ~ 686 {0 ~ 7} 0 ~ 981 {0 ~ 10} A P-2000-101G-15-AN A P-2000-501G-15-AN A P-2000-102G-15-AN A P-2000-352G-15-AN A P-2000-502G-15-AN A P-2000-702G-15-AN A P-2000-103G-15-AN P-2000-101G-15-BN P-2000-501G-15-BN Verify the above model numbers when placing orders. P-2000-102G-15-BN P-2000-352G-15-BN P-2000-502G-15-BN P-2000-702G-15-BN P-2000-103G-15-BN AN A The AN version, marked A is manufactured upon receipt of order basis. P-2000 PRESSURE TRANSDUCERS STANDARD SPECIFICATIONS 255 C 1.5 mA DC Unless otherwise specified, the specs are defined at an ambient temperature of 255 C and excitation current of 1.5 mA DC. Item P-2000 Model number 101G 501G 102G Pressure reference kPa {kgf/cm2} Rated pressure range kPa {kgf/cm2} Maximum pressure kPa {kgf/cm2} Break-down pressure Operating temp. range General specifications Compensated temp. range 9.81 {0.1} 19.6 {0.2} 49.0 {0.5} 49.0 {0.5} 98.1 {1.0} 245 {2.5} C 0 ~ 50 Insulation resistance M minimum g Power Net weight Offset voltage Analog output Approx. 1 mA DC Excitation current Span voltage Thermal error 25 C (Reference temp.: 25 C) 1.5 Constant current mV 20 15 mV 50 20 90 30 0.3 %F.S. Linearity/Hysteresis ZERO %F.S./C 0.15 0.12 SPAN %F.S./C 0.05 0.04 ms Response 25 5 C Vibration 981 m/s2, 3 directions for 3 times each Permissible change 1 %F.S. 0 ~ Rated pressure, 106 cycles Pressure cycling 0 40 C, 90 ~ 95 %RH, 240 hrs. Moisture resistance Approx. 1 ENVIRONMENTAL CHARACTERISTICS Test conditions (At 25 5 C) 10 ~ 500 Hz, 1.5 mm maximum/98.1 m/s2, 3 directions for 2 hours each Non-corrosive gases 3.2 mm Pressure port 981 {10.0} 1471 {15.0} 1961 {20} 500 V AC, 60 s 1 mA Leakage current 1 mA maximum Dielectric strength Shock 686 {7} 1373 {14} 1961 {20} 100 (500 V DC) 490 {5} 981 {10} 1471 {15} 3300 30 % Pressure medium 103G 35 ~ 85 No condensation Test item 343 {3.5} 686 {7.0} 1030 {10.5} - 20 ~ 80 Bridge resistance 702G C - 20 ~ 80 65 %RH Atmospheric pressure, humidity 65 %RH maximum Storage temp. 98.1 {1.0} 196 {2.0} 490 {5} 502G Gauge C %RH Operating humidity 352G P-2000 Offset voltage/Span voltage: 1 %F.S. maximum each P-2000 series can be operated at the vacuum pressure. P-2000 PRESSURE TRANSDUCERS OUTLINE DIMENSIONS Unless otherwise specified, tolerance : 0.3 (Unit: mm) 2.5 3.2 12 7.3 5.2 30.5 G COPAL JAPAN 6 +0.1 0 5 PRESSURE 4 3 2 1 10 1.2 P-2000 R1 TRANSDUCER 0.5(t = 0.3) Pressure port 2.5 BN type Vent hole Pressure range marking 5.2 Pressure range marking 7.3 6 5 2 1 2.5 +0.1 0 10 Vent hole 4 3 3.2 G COPAL JAPAN P-2000 TRANSDUCER PRESSURE 3.50.5 2.5 0.5(t = 0.3) AN type Pressure port 12 1.2 TERMINAL NUMBER INTERNAL ELECTRICAL SCHEMATICS 4 1 R 5 (+) 2 Input 6 3 (-) (-) (+) Output R : Built-in chip resistor for temp. compensation Pin 1 2 3 4 5 6 Connection Output C Input B Input C Output B Input C Input B