856704 836.5 MHz SAW Filter Applications General purpose wireless Wireless infrastructure 3G, 4G, Multistandard Repeaters Product Features Functional Block Diagram Top view Usable bandwidth 25 MHz High attenuation Low Loss Excellent power handling Single-ended operation No matching required for operation at 50 Small Size: 3.00 x 3.00 x 1.22 mm Ceramic Surface Mount Package (SMP) Hermetically Sealed RoHS compliant, Pb-free Pb General Description Gnd 1 6 Gnd Input 2 5 Output Gnd 3 4 Gnd Pin Configuration 856704 is a general purpose Uplink filter for Band 5. This filter was specifically designed in a 3x3mm hermetic package for base station applications and is part of our wide portfolio of RF filters in the same package. Pin # SE Description 2 5 1,3,4,6 Input Output Case Ground Low insertion loss, coupled with high attenuation and excellent power handling, makes this filter a natural choice for our customers Uplink RF filtering needs. Ordering Information Part No. Description 856704 856704-EVB packaged part evaluation board Standard T/R size = 5000 units/reel. Data Sheet: Rev E 3/01/12 (c) 2012 TriQuint Semiconductor, Inc. - 1 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 856704 836.5 MHz SAW Filter Specifications Electrical Specifications (1) Specified Temperature Range: (2) -30 to +85 C Parameter (3) Center Frequency Maximum Insertion Loss Amplitude Variation (5) Amplitude Ripple (6) Phase Ripple Group Delay Ripple Absolute Group Delay Stopband Attenuation (7) Input/output VSWR Source Impedance (8) Load Impedance (8) Conditions 824 - 849 MHz 824 - 849 MHz 824 - 849 MHz 824 - 849 MHz 824 - 849 MHz 824 - 849 MHz 180 - 220 MHz 409 - 635 MHz 869 - 894 MHz 928 - 953 MHz 1136 - 1161 MHz 1240 - 1265 MHz 1440 - 1540 MHz 1540 - 1570 MHz 1570 - 1692 MHz 1853 - 2110 MHz 2111 - 2325 MHz 2885 - 3382 MHz 3917 - 4439 MHz 4949 - 5496 MHz 824 - 849 MHz Single-ended Single-ended Min Typical (4) Max Units 30 30 14 25 20 45 30 33 30 35 30 13 10 5 - 836.5 1.2 0.3 0.18 9.7 13 21 46 40 20 31 31 55 52 52 52 41 41 20 19 11 1.68 50 50 2.0 1.5 0.8 30 30 75 2.0 - MHz dB dB p-p dB p-p deg p-p ns p-p ns dB dB dB dB dB dB dB dB dB dB dB dB dB dB - Notes: 1. All specifications are based on the TriQuint schematic for the main reference design shown on page 3 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Describes the total variation over the defined frequency range 6. This is defined as the worst difference between a peak and adjacent valley 7. Relative to Passband Loss (not absolute value) 8. This is the optimum impedance in order to achieve the performance shown Absolute Maximum Ratings Parameter Rating Operable Temperature Storage Temperature DC Voltage on any port (instantaneous only) (7) Input Power (9) -40 to +85 oC -40 to +85 oC +5 V +22 dBm 9. Input Power is targeted for an applied CW modulated RF in the 824-849 MHz band at 55 C for a minimum of 125 hrs Operation of this device outside the parameter ranges given above may cause permanent damage. Data Sheet: Rev E 3/01/12 (c) 2012 TriQuint Semiconductor, Inc. - 2 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 856704 836.5 MHz SAW Filter Reference Design Schematic 2 50 Single-ended Input 50 5 1,3,4,6 50 Single-ended Output 50 Notes: 1. Actual matching values may vary due to PCB layout and parasitic PC Board Mounting Configuration 3.20 SQ .96 1.70 DK JJJYM 1.27 960700 .81 .38 Notes: Top, middle & bottom layers: 1 oz copper Substrates: FR4 dielectric, .031" thick Finish plating: Nickel: 3-8m thick, Gold: .03-.2m thick Hole plating: Copper min .0008m thick Notes: 1. All dimensions are in millimeters. 2. This footprint represents a recommendation only. Bill of Material Reference Desg. Value Description Manufacturer Part Number SMA PCB N/A N/A SMA connector 3-layer Radiall USA Inc. multiple 9602-1111-018 960700 Data Sheet: Rev E 3/01/12 (c) 2012 TriQuint Semiconductor, Inc. - 3 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 856704 836.5 MHz SAW Filter Typical Performance (at room temperature) Data Sheet: Rev E 3/01/12 (c) 2012 TriQuint Semiconductor, Inc. - 4 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 856704 836.5 MHz SAW Filter Mechanical Information Package Information, Dimensions and Marking Package Style: SMP-12A Dimensions: 3.00 x 3.00 x 1.22 mm Marking code TriQuint logo Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2-6m Ni plating Date code DK ID dot JJJYM All dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.10mm 1.22 NOM. 1.32 MAX. 0.69 The date code consists of: day of the current year (Julian, 3 digits), Y = last digit of the year, and M = manufacturing site code 3.00 0.75 1.50 3.00 0.75 0.60 Tape and Reel Information Standard T/R size = 5000 units/reel. All dimensions are in millimeters TriQuint logo 12.8 2.7 O330 Section A-A ID dot 4.0 0.21 O102 O20.2 O13.0 2.0 2.0 O1.5 A 1.75 5.5 Direction of travel 12.0 3.25 1.4 3.25 4.0 A O1.5 Data Sheet: Rev E 3/01/12 (c) 2012 TriQuint Semiconductor, Inc. - 5 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 856704 836.5 MHz SAW Filter Product Compliance Information ESD Information Solderability Compatible with the latest version of J-STD-020, lead free solder, 260C Caution! ESD-Sensitive Device Refer to Soldering Profile for recommended guidelines. ESD Rating: 1A Value: Passes 400 V min. Test: Human Body Model (HBM) Standard: JEDEC Standard JESD22-A114 This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). This product also has the following attributes: Halogen Free (Chlorine, Bromine) Antimony Free TBBP-A (C15H12Br402) Free PFOS Free SVHC Free ESD Rating: B Value: Passes 250 V min. Test: Machine Model (MM) Standard: JEDEC Standard JESD22-A115 MSL Rating Devices are Hermetic, therefore MSL is not applicable Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Web: www.triquint.com Email: info-sales@tqs.com Tel: Fax: +1.407.886.8860 +1.407.886.7061 For technical questions and application information: Email: flapplication.engineering@tqs.com Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contain herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Data Sheet: Rev E 3/01/12 (c) 2012 TriQuint Semiconductor, Inc. - 6 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R)