3/30/2019 Type 4X Polyester Junction Box w/ Raised Lid (Solid and Window) (PJ Series) - Hammond Mfg.
https://www.hammfg.com/electrical/products/non-metallic/pjrl 1/2
Additional Inner Panels Terminal Kit Assemblies
Swing Panels Pole Mounting Kit
PJ/PJU/PCJ Replacement Hardware Kits PJ Stainless Replacement Mounting Feet
Type 4X Polyester Junction Box w/ Raised Lid (Solid and Window) PJ Series
Continuous Hinge Door with Snap Latches
Application
Designed for use as instrument enclosures, electric, hydraulic or pneumatic control
housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or
be very wet.
Ideal in applications with high temperatures or highly corrosive environments.
Standards
UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
NEMA Type 1, 2, 3, 4, 4X, 12, & 13
IEC 60529, IP66
Construction
Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or
drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting.
Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of
the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information
section.
Finish
Fiberglass polyester material has a gray finish.
Optional inner panels are available in white powder coated finished steel or unfinished
aluminum, or fiberglass.
Accessories
Quality Products. Service Excellence.
3/30/2019 Type 4X Polyester Junction Box w/ Raised Lid (Solid and Window) (PJ Series) - Hammond Mfg.
https://www.hammfg.com/electrical/products/non-metallic/pjrl 2/2
Climate Control General Accessories
Data subject to change without notice
Solid Cover Window Enclosure Optional Inner Panel
Part No. Cover Part No. H W D H D Part No.
PJ664RL PJ664RLW 6.10 6.10 4.18 4.88 4.88 14R0505
PJ864RL PJ864RLW 8.00 6.12 4.13 6.75 4.88 14R0705
PJ1084RL PJ1084RLW 10.13 8.26 4.13 8.75 6.88 14R0907
PJ1086RL PJ1086RLW 10.13 8.26 6.13 8.75 6.88 14R0907
PJ12106RL PJ12106RLW 12.13 10.26 6.13 10.75 8.88 14R1109
PJ12124RL PJ12124RLW 13.33 11.85 12.32 12.32 13.72 14R1111
PJ12126RL PJ12126RLW 13.33 11.85 12.32 12.32 13.72 14R1111
PJ14126RL PJ14126RLW 14.13 12.26 6.13 12.75 10.88 14R1311
PJ16148RL PJ16148RLW 16.27 14.40 8.13 14.75 12.88 14R1513
PJ18168RL PJ18168RLW 18.40 16.40 8.13 16.88 14.88 P1868
PJ20168RL PJ20168RLW 20.00 16.00 8.13 18.44 14.44 P2068
PJ24208RL PJ24208RLW 24.00 20.00 8.13 21.00 17.00 18P2117
PJ24248RL¹ PJ24248RLW¹ 24.00 24.00 8.13 21.00 21.00 18P2121
PJ30248RL¹ PJ30248RLW¹ 30.00 24.00 8.13 27.00 21.00 18P2721
PJ242010RL¹ PJ242010RLW¹ 24.00 20.00 10.13 21.00 17.00 18P2117
PJ242410RL¹ PJ242410RLW¹ 24.00 24.00 10.13 21.00 21.00 18P2121
PJ302410RL¹ PJ302410RLW¹ 30.00 24.00 10.13 27.00 21.00 18P2721
Alternative inner panel options also available. ¹ Uses larger mounting foot.
© 2019. Hammond Manufacturing Ltd. All rights reserved.
