TRG10R SERIES 10W SWITCHING ADAPTER Features * Universal Input: 90-264Vac * Continuous Short Circuit Protection * Interchangeable AC Plugs * EMI Meets EN55022 Class "B" and CISPR/FCC Class B * Meet CEC & ErP Level V (Output cable length 1800mm) * Over Voltage Protection Ordering information TRG10RXXX Model No. - XX X XX DC Plug Type OVP DC Cable Length and Type E: With OVP Option 01: 720mm 02: 1220mm 03: 1800mm 11: 720mm with Ferrite Core 12: 1220mm with Ferrite Core 13: 1800mm with Ferrite Core * 18AWG / UL1185 OUTPUT MAX. MIN. RIPPLE & VOLTAGE LINE LOAD (%) EFF. VOLTAGE LOAD LOAD NOISE ACCURACY REGULATION REGULATION (Typ.) 0A 0A 0A 0A 0A 0A 0A 0A 0A 50mV 1% 1% 1% 1% 1% 1% 1% 1% 2% 2% 2% 2% 2% 2% 2% 2% 2% 1% 1% 1% 1% 1% 1% 1% 1% 1% 4% 3% 3% 2% 2% 2% 2% 2% 2% 75% 75% 75% 76% 76% 76% 77% 77% 77% MODEL TRG10R050 TRG10R060 TRG10R075 TRG10R090 TRG10R120 TRG10R136 TRG10R150 TRG10R180 TRG10R240 5V 6V 7.5V 9V 12V 13.6V 15V 18V 24V 1600mA 1500mA 1200mA 1100mA 850mA 750mA 700mA 550mA 400mA Specifications are subject to change without notice. 1 Specifications TRG10R Series Derating Curve INPUT SPECIFICATIONS: Rated Load(%) 100% Voltage ...................................................................... 90~264Vac Frequency ..................................................................... 47 to 63Hz Input Current .......................................................................... 0.4A max. Inrush Current ........................................................ 40A max. @240Vac Conducted EMI .................................................... CISPR/FCC Class B Leakage Current .......................................................... 0.25mA max. 75% 20LFM(Natural Convection) 50% 25% 0% OUTPUT SPECIFICATIONS: 0 Holdup Time ...................................................... 10mS typ. @115Vac 10 20 30 40 Ambient Temperature(oC) 50 60 Short Circuit Protection ............................... Continuous(Auto Recovery) Over Voltage Protection ................................... TVS Component to Clamp NOTE: Temperature Coefficient ......................................................... 0.05%/ 1. Voltage setpoint at 60% full load GENERAL SPECIFICATIONS: 2. Add a 0.1uF ceramic capacitor and a 10uF E.L. capacitor to output for Isolation ................................................... Input to output = 4,242VDC Ripple & Noise measuring @20MHz BW. 3. Line regulation is measured from 100Vac to 240Vac with full load. Operating Temperature ............................. 0 ~ 60(see Derating Curve) Storage Temperature ............................................................ -20~85 Humidity ............................................... 93% RH max. Non condensing Cooling .............................................................. Natural Convection Switching Frequency .................................................. 66KHz Typical MTBF ............. MIL-HDBK-217F, GB, 25/115VAC ....... 200K hrs min. Altitude .............................................................................. 2000m Dimensions ................... 2.858x1.823x1.402lnches (72.6x46.3x35.6mm) Weight ............................................................... 130g(0.29 Pounds) 4. Load regulation is measured from 60% to full load and from 60% to 20% load (60% +/- 40% load) 5. "Various TR Series adapters are PSE certified. PSE certification alone is not sufficient for importation into Japan. A valid PSE mark must contain the name of the importer as shown in the example below. If PSE mark is required, the name of the registered importer must be supplied to Cincon on order placement. Product labels will not contain PSE mark if importer name is not supplied. Consult factory or local representative for details" SAFETY AND EMC: Emission and lmmunity ............. EN55022 Class B, FCC Part 15 Class B EN61000-6-3, EN61000-3-2, EN61000-3-3 EN55024, EN61204-3, EN61000-6-1 Safety ........................................ IEC60950-1, EN60950-1, UL60950-1 Mechanical Specification All Dimensions are in inches(mm) Tolerance:Inches:X.XXX0.02 Millimeters:X.XX0.5 UNIT: inches(mm) DC Plug type: V+ ) VDC Plug:Right Angle(5.5/2.1)L12mm 18AWG / 1800mm Typical at 25C, nominal line and 75% load, unless otherwise Specified 2