Parts corresponding to RoHS Compliant: 2005-Apr.-1
CRGH0603_XXX (CRGH0603 1/5W +/- 1% & 5% Taped)
CRGH0805_XXX (CRGH0805 1/3W +/- 1% & 5% Taped)
CRGH2512JXXX (CRGH2512 2W +/- 1% & 5% Taped)
Product Type: (Resistance range: 1.0Ω ~ 10MΩ)
PRODUCT SPECIFICATION
CRGH1206_XXX (CRGH1206 1/2W +/- 1% & 5% Taped)
CRGH2010JXXX (CRGH2010 1W +/- 1% & 5% Taped)
1773204-1 Issued Date: 2013/09/18
Description: CRGH Series High Power Thick Film Chip Resistors
1 2008/12/19
218/09/2013
Change to Terminal pad 2512 size
CHANGE NOTIFICATION HISTORY
Version
Date of
Version
History
Remark
CRGH Series
1. Scope:
This specification relates to the Tyco Electronics Thick Film Chip Resistors (Lead Free)
2. Type designation:
The type designation shall be in the following form:
Ex.
3. Ratings:
Type
Power Rating
Max. Working Voltage
Max. Overload Voltage
Dielectric Withstanding Voltage
Temperature Range
Ambient Temperature
3.1 Power rating:
Resistors shall have a power rating based on continuous load operation at an ambient
temperature of 70°C. For temperature in excess of 70°C, the load shall be derate as shown in fig. 1.
Figure 1
3.2 Voltage Rating:
Resistors shall have a rated direct-current (DC) continuous working voltage or an approximate sine-wave
root-mean-square (RMS) alternating-current (AC) continuous working voltage at commercial-line frequency
and waveform curresponding to the power rating , as determined from the following formula:
RCWV = √P x R
Where : RCWV = Rated DC or RMS AC continuous working voltage at commercial-line frequency and
waveform (volt)
P = Power Rating (watt)
R = Nominal Resistance (ohm)
In no case shall the rated DC or RMS AC continuous working voltage be greater
than the applicable maximum value.
400 V
500 V
CRGH2010
1.0W
200 V
400 V
500 V
150 V
0.33W
CRGH0805
CRGH1206
0.50W
200 V
F (1%)
J (5%)
1K0
CRGH0603
0.20W
CRGH2512
2.0W
CRGH2010
1W
1/5W
1/2W
1/3W
CRGH0603
CRGH0805
CRGH2512
2W
CRGH1206
Part No.: CRGH Series
Customer:
High Power Thick Film Chip Resistors
Nominal Resistance
Power Rating
Resistance tolerance
Type
50 V
250 V
500 V
70°C
-55°C ~ +155°C
500 V
100 V
300 V
500 V
300 V
4. Construction :
5. Power rating and dimensions
CRGH0805_XXX (CRGH0805 1/3W +/- 1% & 5% Taped)
CRGH2512JXXX (CRGH2512 2W +/- 1% & 5% Taped)
Dimension :
CRGH0603 1.60 ± 0.10
0.80 + 0.15
- 0.10
0.45 ± 0.10
CRGH0805 2.00 ± 0.15
1.25 + 0.15
- 0.10
0.55 ± 0.10
CRGH1206 3.10 ± 0.15
1.55 + 0.15
- 0.10
0.55 ± 0.10
CRGH2010 5.00 ± 0.20 2.50 ± 0.15 0.55 ± 0.10
CRGH2512 6.35 ± 0.10 3.20 ± 0.15 0.55 ± 0.10
Power Rating : Power Rating Tolerance Resistance
at 70°C % Range
± 1 1Ω ~ 10MΩ
± 5 1Ω ~ 10MΩ
± 1 1Ω ~ 10MΩ
± 5 1Ω ~ 10MΩ
± 1 1Ω ~ 10MΩ
± 5 1Ω ~ 10MΩ
± 1 1Ω ~ 10MΩ
± 5 1Ω ~ 10MΩ
± 1 1Ω ~ 9.76Ω
± 5 1.1MΩ ~ 10MΩ
0.60 ± 0.25
0.50 ± 0.20
E-24
TCR
E-96
E-24
< 10W
±200PPM/°C <
10W ±100PPM/°C
< 10W
±200PPM/°C <
< 10Ω
±200PPM/°C <
E-96
CRGH1206
0.50W
E-24
< 10W
±200PPM/°C <
0.20W
CRGH0603
0.33W
CRGH0805
CRGH2010
1.00W
L
Dimension (mm)
0.40 ± 0.20
W
ℓ1
0.40 ± 0.20
ℓ2
0.45 ± 0.20
High Power Thick Film Chip Resistors
H
1.80 ± 0.20
Type
E-96
0.60 ± 0.25
Type
Standard Series
0.45 ± 0.20
E-24
2.00W
CRGH2512
< 10Ω
±200PPM/°C <
Part No.: CRGH Series
Customer:
E-24
E-96
0.30 ± 0.20
0.30 ± 0.20
5.1 PCB Layout Plan:
Dimension : Dimension (mm)
CRGH0603 1.00 1.00 0.60
CRGH0805 1.30 1.20 1.00
CRGH1206 1.80 1.20 2.20
CRGH2010 3.00 1.50 3.80
CRGH2512 3.50 1.90 5.00
Part No.: CRGH Series
Customer:
High Power Thick Film Chip Resistors
Type
A
B
C
6. Marking :
6.1 Resistors
A. ± 5% Tolerance : the first two digits are significant figures of resistance
and the third denoted number of zeros.
Ex.
33KW
B. For ohmic values below 10 Ω, read letter "R" as decimal point.
Ex.
2.2W
C. For E-96 series [±1% (F) tolerance] in CRGH0603 size 3 digit system (due to space restrictions)
please refer to page 4. for coding formula
Ex.
10.2KW
D. ±1% Tolerance : 4 Digits, the first three digits are singnificant figures of
CRGH0805_XXX (CRGH0805 1/3W +/- 1% & 5% Taped)
resistance and the fourth digit denoted number of zeros. Letter"R" is for decimal point.
Ex.
CRGH2512JXXX (CRGH2512 2W +/- 1% & 5% Taped)
2.7KW
10.5Ω
6.2 Labels
Label shall be marked with the following item :
Label shall be marked with the following item :
A. Nominal Resistance and Resistance Tolerance
B. Power Rating and Size
C. Quantity
D. Part No.
E. P.O.No.
F. Lot No.
RESISTANCE: 330K Ω± 5 %
WATTAGE: 1/2W SIZE: CRGH0603
QUANTITY: PCS Pb-Free
Ex. PART NO.: CRGH0603F330K RoHS 2002/95/EC
LOT NO. : 825723 REF # 2456319325
Remark : For CRGH0603 ± 1 % : Label is 332K, value is 332KΩ, marking is 51D
± 5 % : Label is 330K, value is 330KΩ, marking is 334
± 1 % : Label is 330K, value is 330KΩ, marking is 3303
5,000
2701
10R5
High Power Thick Film Chip Resistors
333
2R2
Part No.: CRGH Series
Customer:
02C
Mutiplier Code :
Code A B C D E F G H X Y Z
0 1 2 3 4 5 6 7 -1 -2 -3
Multiplier 10 10 10 10 10 10 10 10 10 10 10
Coding Formula Example :
10K2 = 102 X 102 = 02C
XX X 02
C
Resistance Code Multiplier Code
33R2 = 332 X 10-1 = 51X
51
X
Value Code Value Code Value Code Value Code Value Code
100 01 162 21 261 41 422 61 681 81
102 02 165 22 267 42 432 62 698 82
105 03 169 23 274 43 442 63 715 83
107 04 174 24 280 44 453 64 732 84
110 05 178 25 287 45 464 65 750 85
113 06 182 26 294 46 475 66 768 86
115 07 187 27 301 47 487 67 787 87
118 08 191 28 309 48 499 68 806 88
121 09 196 29 316 49 511 69 825 89
124 10 200 30 324 50 523 70 845 90
127 11 205 31 332 51 536 71 866 91
130 12 210 32 340 52 549 72 887 92
133 13 215 33 348 53 562 73 909 93
137 14 221 34 357 54 576 74 931 94
140 15 226 35 365 55 590 75 953 95
143 16 232 36 374 56 604 76 976 96
147 17 237 37 383 57 619 77
150 18 243 38 392 58 634 78
154 19 249 39 402 59 649 79
158 20 255 40 412 60 665 80
*Marking for CRGH0603 E-96 series, the resistance value that no have multiplier code indicate marking follow this:
The first two digits are significant figures of resistance and the third one denoted number of zeros
and under line the marking letters.
Ex.
1.2KW
High Power Thick Film Chip Resistors
122
Customer:
Part No.: CRGH Series
7. Performance specification :
No evidence of flashover 4.7 Clamped in the trough of a 90°C metallic v-block and
mechanical damage, arcing or shall be tested at ac potential respectively specified in
insulation break down the type for 60-70 seconds
4.8 Natural resistance change per temp. degree centigrade.
R2-R1
R1(t2-t1)
R1: Resistance value at room temperature (T1)
R2: Resistance value at room temp. plus 100°C (T2)
Test pattern: room temp. (T1), room temp. +100°C (T2)
Resistance change rate is 4.13 Permanent resistance change after the application
± 5% (2.0% + 0.1Ω) Max. of a potential of 2.5 times RCWV for 5 seconds.
± 1% (1.0% + 0.1Ω) Max.
Wave Solder:
Test temperature of solder:
245°C ±3°C dipping time in solder : 2-3 seconds.
Reflow Solder:
Resistance change rate is: 4.18 Dip the resistor into a solder bath having a temperature
±(1%+0.05Ω) Max. of 260°C ± 3°C and hold it for 10 ± 1 seconds.
4.19 Resistance change after continuous
5 cycles for duty cycle specified below :
Resistance Change Rate Is Step Temperature Time
± 5% (1.0% + 0.05W) Max. 1 -55°C ± 3°C 30 mins
± 1% (0.5% + 0.05W) Max. 2 Room temp. 10 ~ 15 mins
3 +155°C ± 2°C 30 mins
4 Room temp.
10 ~ 15 mins
Resistance change rate is 4.24 Temporary resistance change after 240 hours
± 5% (3.0% + 0.1W) Max. exposure in a humidity test chamber controlled at
± 1% (1.0% + 0.1W) Max. 40±2°C and 90-95% relative humidity
Resistance change rate is 7.9 Resistance change after 1,000 hours (1.5 hours "on",
± 5% (3.0% + 0.1W) Max. 0.5 hour "off" ) at RCWV in a humidity chamber
± 1% (1.0% + 0.1W) Max. controlled at 40°C ± 2°C and 90 to 95% relative humidity
Resistance change rate is 4.25.1 Permanent resistance change after 1,000 hours
± 5% (3.0% + 0.1W) Max. operating at RCWV, with duty cycle of
± 1% (1.0% + 0.1W) Max. (1.5 hours"on", 0.5 hour"off") at 70°C ± 2°C ambient
Resistance change rate is 4.33 Twist of Test Board :
± (1.0% + 0.05W) Max. Y/X = 3/90 mm for 60 seconds
Customer:
Part No.: CRGH Series
x 106 (PPM/°C)
See Page 2
Short time
Overload
Temperature
Coefficient
Dielectric
withstanding
voltage
High Power Thick Film Chip Resistors
Limits
Characteristics
Test Methods
( JIS C 5201-1 )
Humidity
Terminal Bending
Load Life
Load life in
Humidty
Solderability
95 % coverage Min.
Soldering heat
Temperature
cycling
6. Packing specification :
6.1 Taping Dimension (mm)
A. Paper tape
B. Plastic tape
CRGH0805_XXX (CRGH0805 1/3W +/- 1% & 5% Taped)
ψD +0.1
- 0
CRGH0603 1.10 1.90 2.0 1.5 1.75 3.5 4.0 8.0 0.67
CRGH0805 1.65 2.40 2.0 1.5 1.75 3.5 4.0 8.0 0.81
CRGH1206 2.00 3.60 2.0 1.5 1.75 3.5 4.0 8.0 0.81
CRGH2010 2.80 5.50 2.0 1.5+0.25 1.75 5.5 4.0 12.0 1.2±0.0
CRGH2512 3.60 6.90 2.0 1.5+0.25 1.75 5.5 4.0 12.0 1.2±0.0
7.2 Reel Dimension (mm)
A. Paper tape B. Plastic tape
Type
Packaging
A B C D M ± 2 W ± 1 T ± 1
CRGH0603 Paper 2±0.5 13±0.5 21±0.5 60±1.0 178±2.0 10±1.0 -
CRGH0805 Paper 2±0.5 13±0.5 21±0.5 60±1.0 178±2.0 10±1.0 -
CRGH1206 Paper 2±0.5 13±0.5 21±0.5 60±1.0 178±2.0 10±1.0 -
CRGH2010 Plastic 180-3.0 60+1.0 13±0.2 - - 13.5±0.5 15.4±1.0
CRGH2512 Plastic 180-3.0 60+1.0 13±0.2 - - 13.5±0.5 15.4±1.0
5,000 pcs.
4,000 pcs.
Customer:
Part No.: CRGH Series
5,000 pcs.
5,000 pcs.
G ± 0.1
W ± 0.2
4,000 pcs.
High Power Thick Film Chip Resistors
Type
A ± 0.2
B ± 0.2
C ± 0.05
E ± 0.1
F ± 0.05
T ± 0.1
Quantity Per Reel
12345678
C R G H 0 6 0 3
CRGH0805_XXX (CRGH0805 1/3W +/- 1% & 5% Taped)
CRGH2512JXXX (CRGH2512 2W +/- 1% & 5% Taped)
2010
2512
Part Number System
Explanation of Part Number System
Resistance Value:
1R0 - 1.0 ohm
100R - 100 ohms
1K0 - 1000 ohms
10K - 10,000 ohms
100K - 100,000 ohms
1M0 - 1,000,000 ohms
10M - 10,000,000 ohms
Case Size / Wattage:
Series Name
CRGH Series High Power
Thick Film Chip Resistors
0603
0805
1206
Tolerance:
F ~ ± 1%
High Power Thick Film Chip Resistors
11
10
12
J ~ ± 5%
Part No.: CRGH Series
Customer:
1
0
9
F
K
13
0