40 9 8 7 6 5 4 3 2 | 38720 ASSEMBLY ASSEMBLY ccs mm A in nm B i) | MATERIAL NO. | MATERIAL NO. (STD. -C) (-C-50 OPT) 02 21.1 0.83 9.53 | 0.375 387200302 387202302 03 30.6 1.21 19.05 | 0.750 387200303 387202303 k "AY 04 40.2 1.58 28.58 | 1.125 387200304 387202304 05 49.7 1.96 38.10 | 1.500 387200305 387202305 06 59.2 2.33 47.63 | 1.875 387200306 387202306 "B 07 68.8 2.71 57.15 | 2.250 387200307 387202307 08 78.3 3.08 66.68 | 2.625 387200308 387202308 a9 87.8 3.46 76.20 | 3.000 387200309 387202309 10 97.3 3.83 85.73 | 3.375 387200310 387202310 "1 106.8 4.21 95.25 | 3.750 387200311 387202311 4 CIRCUIT SHOWN 2 116.4 458 | 104.78 | 4.125 387200312 387202312 13 125.9 4.96 114.30 4.500 387200313 387202313 SCALE 15:1 14 135.4 5.33 | 123.83 | 4.875 387200314 387202314 15 145.0 5.71 133.35 5.250 387200315 387202315 16 154.5 6.08 142.88 5.625 387200316 387202316 17 164.0 6.46 152.40 6.000 387200317 387202317 18 173.5 6.83 | 161.93 6.375 387200318 387202318 19 183.1 7.21 171.45 6.750 387200319 387202319 20 192.6 7.58 180.89 | 7.125 387200320 387202320 21 202.1 7.96 _| 190.50 7.500 387200321 387202321 22 211.6 8.33 | 200.03 | 7.875 387200322 387202322 23 221.1 8.71 209.55 | 8.250 387200323 387202323 24 230.7 9.08 219.08 8.625 387200324 387202324 25 240.2 9.46 228.60 | 9.000 387200325 387202325 26 249.7 9.83 | 238.13 9.375 387200326 387202326 REF. -50 OPT. SCREW (ITEM 4) (WHERE APPLICABLE) NOTES: 1. MATERIAL: SEE TABLE. Ss 5S DIMENSION STYLE SCALE DESIGN UNITS ; = S| JQuality) GENERAL TOLERANCES THIRD. ANGLE 2. FINISHES: SEE TABLE. 2 5 &} |sympois| (UNLESS SPECIFIED) MM/IN 2:1 INCH Oc PROJECTION 3. PRODUCT SPECIFICATION: NOT REQUIRED. S55 = mm INCH _ | DRAWN BY DATE TITLE 1; 4, ROHS COMPLIANT. ~S Rlg\W-0 [PLaces[e--- e--- J. ENCINAS 2009/08/17 9.53MM [.375"] SR BTS <a r 3 PLACES|+-- _|+.005 _|CHECKED BY DATE CB ASSY., NO MTG. ENDS 4 |XX {SCREW W/WASHER, #6-32X.250 PAN, PH/SL (-50 OPT) STEEL ZN, CLEAR CHROMATE]= 3 2 =I5|\C/-O [2 PLACES[+0.13 [4.01 _|C. YORK 2009/08/17 2 < = = WW 1 PLACE [03 +--- APPROVED BY DATE hole 3 |XX _|SCREW, #6-32X.250 BHD PH/SL (STANDARD) STEEL ZN, CLEAR CHROMATE | SZ ANGULAR 2 WN. MACNEIL 2009/08/17] #o'sx +=MOLEX INCORPORATED 2 |XX | TERMINAL, CB BRASS TIN PLATE a S 26 & DRART WHERE APPLICABLE MATERIAL NO. SD 38720 013 SHEET NO. 1 |1 SR BTS INSULATOR, CB MO C POLYESTER (PBT) | BLACK Oyzre ee CHART 1 OF 4 = WITHIN DIMENSIONS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ITEM | aTy. | DESCRIPTION MATERIAL FINISH B ig B INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 1b_frame_B_P_ME_T 9 8 7 6 5 4 | 3 | 2 1 Rev. D 2004/04/02