150W Constant Power Mode DriverLED XLG-150 series
File Name:XLG-150-SPEC 2019-07-05
■Description
■Features ■Applications
■Model Encoding
XLG - 150
Rated wattage
Series name
AB
Type
A
L
Rated output voltage(12/24V or L/M/H types)
Function options
-
3 in 1 dimming function (0~10Vdc, 10V signal and resistance)PWM
In Stock
Function Note
In Stock
Io adjustable via built-in potentiometer
Io adjustable via built-in potentiometer +
｛
I: for India version(by request with Input over voltage protection)
:For standard version
I
Note: 12V and 24V models without the typeAB
-
Blank By request
Io and Vo fixed.(For harsh environment)
(Except for L type)
M M
110
SELV
Type HL
05
Note.12
Skyscraper lighting•
Street lighting•
Floodlight Lighting•
Stage lighting•
•Fishing lighting
•Horticulture lighting
Bay lighting
•
DMX power supply•
Type HL for use in class I, Division 2•
•Wide input range 100~305V AC( Class I)
•Full power output at 70~100% Constant power mode operation
•Metal case with IP67, suitable for outdoor application
•Surge protection with 6KV/4KV (10KV/6KV optional)
•3 in 1 dimming function (Dim to off and Isolation design)
•India (EESL) version with Input Over Voltage Protection can
survive input voltage stress of 440Vac for 48 hours
•Protection functions: OVP/SCP/OCP/OTP
•Life time >50,000 hrs. and 5 years warranty
E320521
(for 12,24 only)
(Except for L type)
XLG LED AC DC XLG-150 series is a 150W / driver featuring the constant power mode. -150 operates
from 100~305 and offers models with different rated current ranging between 700mA and 12500mA.VAC
Thanks to the high efficiency up to 93%, with the fanless design, the entire series is able to operate for
-40 ~+90 case temperature under free air convection. The design of metal housing and 67 ingressIP
℃℃
protection level allows this series to fit both indoor and outdoor applications. Moreover the innovative
environment-adaptive capability allows this series to reliably light on the s for all kinds of applicationLED
environments in almost any spots that may install luminaires in the world. 150 series complyLED XLG-
with the latest version of 61347 7000 1 2015 and 8750 international safety regulations/.- .IEC GB UL
The output and dimming circuit are also completely in accordance with the new regulations with
isolation to ensure the safety of both user and luminaire system during installation.
(For 24V only)
LVLE
IS 15885(Part 2/Sec13)
R-41027766
THOMAS SAMUEL
THOMAS SAMUEL
(for XLG-150I type only )
SPECIFICATION
MODEL
OUTPUT
VOLTAGE RANGE Note.5
FREQUENCY RANGE
POWER FACTOR
EFFICIENCY (Typ.)
AC CURRENT
INPUT
INRUSH CURRENT(Typ.)
LEAKAGE CURRENT
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
MTBF
DIMENSION
OTHERS
NOTE
PACKING
OVER TEMPERATURE
OVER VOLTAGE
500ms, 100ms/230VAC, 1200ms, 100ms/115VAC
10ms/ 230VAC 10ms/ 115VAC
47 ~ 63Hz
1.8A / 115VAC 1.0A / 230VAC 0.8A/277VAC
<0.75mA / 277VAC
20 ~ 95% RH non-condensing
-40 ~ + , 10 ~ 95% RH90℃
±℃ ℃0.06%/ (0 ~ 60 )
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
ENVIRONMENT
SAFETY &
EMC
PROTECTION
Hiccup mode, recovers automatically after fault condition is removed
Shut down output voltage, re-power on to recover
SHORT CIRCUIT
I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
TOTAL HARMONIC DISTORTION
DC VOLTAGE
RATED CURRENT
RATED POWER
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME Note.6
HOLD UP TIME (Typ.)
RIPPLE & NOISE (max.)
Note.3
VOLTAGE TOLERANCE
Note.4
CONSTANT CURRENT REGION Note.2
OVER CURRENT
COLD START 50A(twidth= s measured at 50% Ipeak) at 230VAC500μ;Per NEMA 410
MAX. No. of PSUs on 16A
CIRCUIT BREAKER 4 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 230VAC
MAX. CASE TEMP. Tcase=+90℃
(Please refer to "STATIC CHARACTERISTIC" section)
100 ~ 305VAC 142 ~ 431VDC
1. All parameters NOT specially mentioned are measured at 230VAC input, rated and 25 of ambient temperature.current ℃
2. Please refer to "DRIVING METHODS OF LED MODULE".
3. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
4. Tolerance : includes set up tolerance, line regulation and load regulation.
5. De rating may be needed under low input voltages. Please .- refer to STATIC CHARACTERISTIC sections for details
6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
7.Input over voltage only for XLG-150 I series ,and I series without UL/CSA certificate.
8. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
9.The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃
10. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com
11. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 75 or less.℃
12.Products sourced from the Americas regions may not have the CCC/PSE/BIS/KC logo. Please contact your MEAN WELL sales for more information.
13.For any application note and IP water proof function installation caution, please refer our user manual before using.
https://www.meanwell.com/Upload/PDF/LED_EN.pdf
14. To fulfill requirements of the latest ErP regulation for lighting fixture, this LED driver can only be used behind a switch without permanently connected to the mains.
95 ~ 108%
Hiccup mode constant current limiting,
or recovers automatically after fault condition is removed
Hiccup mode or constant current limiting, recovers automatically after fault condition is removed
PF 0.97/115VAC, PF 0.95/230VAC, PF 0.92/277VAC@full load≧≧≧
THD< 10%(@load 50%/115VC,230VAC; @load 75%/277VAC)≧≧
Tcase=-40 ~ +90 (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)℃
XLG-150 -12-
12V
12.5A
150mVp-p
8.4~ 12V
150W
±3.0%
±0.5%
±2%
91.5%
13.5 ~ 18V
712.17K hrs min. Telcordia SR-332 (Bellcore) ; 213.3Khrs min. MIL-HDBK-217F (25 )℃
180 63**35.5mm (L*W*H)
0.8Kg;16pcs / 13.4Kg /0.67CUFT
File Name:XLG-150-SPEC 2019-07-05
SAFETY STANDARDS Note.7 UL8750 ENEC EN61347-1, EN61347-2-13 independent, EN62384(type”HL”), UL879,CSA C22.2 No. 250.13-12; ;
GB19510.1 GB19510.14,; EAC TP TC 004; IS15885(Part2/Sec13)(for XLG-150I type only);IP67 approved
150W Constant Voltage + Constant Current DriverLED XLG-150 series
XLG-150 -24-
24V
6.25A
240mVp-p
16.8~ 24V
150W
±2.0%
±0.5%
±1%
93%
27 ~ 34V
NO LOAD
POWER CONSUMPTION
INPUT OVER VOLTAGE
Note.7
320 ~ 390 (Shut down output voltage when the input voltage exceeds protection voltage, )VAC
recovers automatically after fault condition is removed
can survive input voltage stress of 440Vac for 48 hours
No load power consumption <0.5W for A-Type
CURRENT ADJ. RANGE 6.5~ 12.5A 3.2~ 6.25A
Adjustable for A-Type only (via the built-in potentiometer)
Parameter
Conducted
Radiated
Harmonic Current
Voltage Flicker
EN61547
Parameter
ESD
Radiated
EFT/Burst
Surge
Conducted
Magnetic Field
Voltage Dips and Interruptions
Standard
EN61000-3-3
Standard
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
EN61000-4-11
Test Level/Note
-----
-----
Class C @load≥50%
-----
Test Level/Note
Level 3, 8KV air ; Level 2, 4KV contact
Level 2
Level 3
4KV/Line-Line 6KV/Line-Earth(6K/10K option)
Level 2
Level 4
>95% dip 0.5 periods, 30% dip 25 periods,
>95% interruptions 250 periods
EMC IMMUNITY
EMC EMISSION
EN55015(CISPR15) ,GB/T17743
EN55015(CISPR15) ,GB/T17743
EN61000-3-2 ,GB/T17625.1
SPECIFICATION
NOTE
File Name:XLG-150-SPEC 2019-07-05
150W Constant Power Mode DriverLED XLG-150 series
Parameter
Conducted
Radiated
Harmonic Current
Voltage Flicker
Parameter
ESD
Radiated
EFT/Burst
Surge
Conducted
Magnetic Field
Voltage Dips and Interruptions
Standard
EN61000-3-3
Standard
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
EN61000-4-11
Test Level/Note
-----
-----
Class C @load≥50%
-----
Test Level/Note
Level 3, 8KV air ; Level 2, 4KV contact
Level 3
4KV/Line-Line 6KV/Line-Earth(6K/10K option)
Level 4
>95% dip 0.5 periods, 30% dip 25 periods,
>95% interruptions 250 periods
MODEL
RATED CURRENT
RATED POWER
FULL POWER CURRENT RANGE
OUTPUT
CURRENT ADJ RANGE.
VOLTAGE RANGE Note.5
FREQUENCY RANGE
POWER FACTOR (Typ.)
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INPUT
INRUSH CURRENT(Typ.)
LEAKAGE CURRENT
SAFETY STANDARDS Note.7
WORKING HUMIDITY
STORAGE TEMP HUMIDITY.,
VIBRATION
OVER VOLTAGE
OVER TEMPERATURE
ENVIRONMENT
SAFETY &
PROTECTION
SHORT CIRCUIT
TOTAL HARMONIC DISTORTION
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
CONSTANT CURRENT REGION
MAX NO PSU. . of s on 16A
CIRCUIT BREAKER
OPEN CIRCUIT VOLTAGE (max.)
TEMP. COEFFICIENT
WORKING TEMP.
MAX CASE TEMP..
CURRENT RIPPLE
CURRENT TOLERANCE
SET UP TIME
STANDBY POWER
CONSUMPTION
Note.14
INPUT OVER VOLTAGE Note.7
47 ~ 63Hz
<0.75mA / 277VAC
20 ~ 95% non-condensingRH
-40 ~ +80 , 10 ~ 95% non-condensing℃RH
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
93% 92.5% 92%
COLD START VAC50A(twidth=500 s measured at 50% Ipeak) at 230 ;μPer 410NEMA
I/P-O/P:3.75 I/P- :2 O/P- :1.5KVAC FG KVAC FG KVAC
I/P-O/P, I/P- , O/P- :100M Ohms / 500 / 25 / 70%FG FG VDC RH℃
4 unit(circuit breaker of type B) / 8 units(circuit breaker of type C) at 230VAC
Hiccup mode or Constant current limiting, recovers automatically after fault condition is removed
(Please refer to " " ang “ "section)STATIC CHARACTERISTIC DRIVING METHODS OF LED MODULE
100 ~ 305 142 ~ 431VAC VDC VDC
230 ~ 265V 128~ 150V 61 ~ 78V
Shut down output voltage, re-power on to recovery
±0.06%/ (0 ~ 60 )℃℃
Tcase=-40 ~ +90 (Please refer to " vs " section)℃OUTPUT LOAD TEMPERATURE
Tcase=+90℃
0.97 / 115 , 0.95 / 230 full loadPF VAC PF VAC≧≧≧, 0.92 / 277 atPF VAC
(Please refer to " " )Power Factor Characteristic section
THD VAC VAC VAC< 10% (@ load 50% at 115 /230 ,@load 75% at 277 )≧≧
Please refer to “ ( )” sectionTOTAL HARMONIC DISTORTION THD
3.0%(@ full load)
±5%
500ms/230 , 1200ms/115VAC VAC
UL8750 ENEC EN61347-1, EN61347-2-13 independent, EN62384(type”HL”), CSA C22.2 No. 250.13-12; ;
GB19510.1 GB19510.14,; EAC TP TC 004; IS15885(Part2/Sec13)(for XLG-150I type only);IP67 approved
350~1050mA
700mA
150W
700~1050mA
120 ~214V
225V
XLG-150 -L-
150W
1400mA
60 ~ 107V
115V
700~2100mA
1400~2100mA
XLG-150 -M-
150W
2800mA
27 ~ 56V
60V
1400~4170mA
2680~4170mA
XLG-150 -H-
Hiccup mode, recovers automatically after fault condition is removed
Standby power consumption <0.5W for AB-Type(Dimming OFF)
can survive input voltage stress of 440Vac for 48 hours
1.8A / 115VAC 1.0A / 230VAC 0.8A/277VAC
Adjustable for A/AB-Type only (via the built-in potentiometer)
EMC
MTBF
DIMENSION
OTHERS
712.17K hrs min. Telcordia -332 (Bellcore) ;SR 213.3Khrs min. - -217F (25 )MIL HDBK ℃
PACKING 0.8Kg;16pcs/13.4Kg/0.67CUFT
LIFETIME Note.4 50000 hrs min.
180 63**35.5mm (L*W*H)
1. All parameters NOT specially mentioned are measured at 230VAC input, rated and 25 of ambient temperature.current ℃
2. Please refer to "DRIVING METHODS OF LED MODULE".
3. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
4. Tolerance : includes set up tolerance, line regulation and load regulation.
5. De rating may be needed under low input voltages. Please .- refer to STATIC CHARACTERISTIC sections for details
6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
7.
Input over voltage only for XLG-150 I series ,and I series without UL/CSA certificate.
8. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
9. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).
℃℃
10. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com
11. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 75 or less.
℃
12. Products sourced from the Americas regions may not have the CCC/PSE/BIS/KC logo. Please contact your MEAN WELL sales for more information.
13. For any application note and IP water proof function installation caution, please refer our user manual before using.
https://www.meanwell.com/Upload/PDF/LED_EN.pdf
14 To.fulfill requirements of the latest ErP regulation for lighting fixture, this LED driver can only be used behind a switch without permanently connected
to the mains.
EMC IMMUNITY
EMC EMISSION
Level 2
Level 2
4.0%(@ full load)3.0%(@ full load)
EN61547
EN55015(CISPR15) ,GB/T17743
EN55015(CISPR15) ,GB/T17743
EN61000-3-2 ,GB/T17625.1
320 ~ 390 (Shut down output voltage when the input voltage exceeds protection voltage, )VAC
recovers automatically after fault condition is removed
BLOCK DIAGRAM
PFC KHfosc : 50~120 z
fosc : 60~130 zPWM KH
150W Constant Power Mode DriverLED XLG-150 series
File Name:XLG-150-SPEC 2019-07-05
DETECTION
PWM CIRCUIT
O.L.P.
EMI FILTER
RECTIFIERS
POWER
SWITCHING
FILTER
&
RECTIFIERS +V
-V
I/P
FG
CONTROL
O.V.P.
&PFC
CIRCUIT
PFC
CONTROL
DRIVING METHODS OF LED MODULE
※-I V Operating Area
Recommend Performance Region Recommend Performance Region
Recommend Performance Region
O.T.P.
※This series is able to work in either Constant Current mode (a
direct drive way) or Constant Voltage mode (usually through
additional DC/DC driver) to drive the LEDs.
Typical output current normalized by rated current (%)
100
60
(min.)
Vo(%)
50 100 Io(%)
(B)
Constant
Current area
(C)
Hiccup
Protection
(A)
Constant
V areaoltage
In the constant current
depends on the configuration
Should there be any
at the output of the driver
region, the highest voltage
of the end systems.
compatibility issues, please
please contact MEAN WELL.
O.C.P. DIM+
DIM-
(AB Type)
100V
120V
140V
160V
180V
200V
220V
240V
0mA 250mA 500mA 750mA 1000mA 1250mA
1050mA,142V
700mA,214V
1050mA,120V
620mA,120V
350mA,214V
50V
60V
70V
80V
90V
100V
110V
120V
0mA 550mA 1100mA 1650mA 2200mA
2100mA,60V
1250mA,60V
700mA,107V 1400mA,107V
2100mA,71V
20V
25V
30V
35V
40V
45V
50V
55V
60V
0mA 600mA 1200mA 1800mA 2400mA 3000mA 3600mA 4200mA
4170mA,27V
2680mA,27V
1400mA,56V 2680mA,56V
4170mA,36V
150W Constant Power Mode DriverLED XLG-150 series
File Name:XLG-150-SPEC 2019-07-05
DIMMING OPERATION
※3 in 1 dimming function (for AB-Type)
•Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-:
0 ~ 10VDC, or 10V PWM signal or resistance.
Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.•
Dimming source current from power supply: 100 A (typ.)•μ
Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%< out<8%.I
2. The output current could drop down to 0% when dimming input is about 0k or 0Vdc, or 10V PWM signal with 0% duty cycle.Ω
Vo+
Vo-
DIM+
DIM-
++
+
--
-
“DO NOT connect "DIM- to Vo-"
Additive Voltage
Vo+
Vo-
DIM+
DIM-
++
--
“DO NOT connect "DIM- to Vo-"
Additive PWM signal
Vo+
Vo-
DIM+
DIM-
++
--
“DO NOT connect "DIM- to Vo-"
Additive Resistance
0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V
10%
0%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Output current (%)
0%
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
10%
0%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Output current (%)
10%
0%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Output current (%)
Dimming input: Additive voltage
Duty cycle of additive 10V PWM signal dimming input
Short
10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N
(N=driver for synchronizedquantity dimming operation)
Dimming input: Additive resistance
FG(Green/Yellow)
AC/L(Brown)
AC/N(Blue)
XLG-150
DIM-(White)
DIM+( )Blue
Vo+(Red)
Vo-(Black)
0%
1%
2%
3%
4%
5%
6%
7%
8%
9%
10%
11%
50% 60% 70% 80% 90% 100%
277V
230V
115V
150W Constant Power Mode DriverLED XLG-150 series
File Name:XLG-150-SPEC 2019-07-05
-40 -30 0 10 30 50 70 90
20
40
60
80
100
OUTPUT LOAD vs TEMPERATURE
STATIC CHARACTERISTIC
LOAD (%)
(HORIZONTAL)
LOAD (%)
(HORIZONTAL)
PF
INPUT VOLTAGE (V) 60Hz
LOAD (%)
LOAD
POWER FACTOR (PF) CHARACTERISTIC
EFFICIENCY vs LOAD
XLG-150 series possess superior working efficiency that up to 93% can
be reached in field applications.
EFFICIENCY(%)
LOAD
※Tcase at 75℃
TOTAL HARMONIC DISTORTION (THD)
LOAD
※Model, Tcase at 75XLG-150-L ℃
Constant Current Mode
100 140 160 180 200 220 240 260 280 305
100
90
80
70
60
50
40
※Model, Tcase at 75XLG-150-L ℃
230VAC
Input only
THD
110
If XLG-150 operates in Constant Current mode with the rated
current the maximum workable Ta is 55 (Typ. 230VAC) or 40 (Typ.100VAC)℃℃
Below 110VAC@ -30 may retry to 2nd setup℃
-40 -30 -10 0 15 30 40 55 70
20
40
60
80
100
230VAC
Input only
100VAC
230VAC
0.8
0.82
0.84
0.86
0.88
0.9
0.92
0.94
0.96
0.98
1
50% 60% 70% 80% 90%
277V
230V
115V
60
64
68
72
76
80
84
88
92
96
50% 60% 70% 80% 90%
277V
230V
115V
90
150W Constant Power Mode DriverLED XLG-150 series
File Name:XLG-150-SPEC 2019-07-05
LIFE TIME
0
20
40
60
80
100
120
25 30 35 40 45 50 55 60 65 70 75 80 85 90
LIFETIME(Kh)
Tcase ( )℃
150W Constant Power Mode LED Driver XLG-150 series
File Name:XLG-150-SPEC 2019-07-05
MECHANICAL SPECIFICATION Case No.: 243A Unit:mm
※Blank-Type
169
180
156
45.8
63
300±20
300±20
35
35.5
4- 4.5ψ
tc
SJOW 17AWGx3C
&H05RN-F 3x1.0mm2
AC/L(Brown)
AC/N(Blue)
FG(Green/Yellow)
Vo-(Black)
Vo+(Red)
SJOW 17AWGx2C&05RN-F 2x1.0mm (for H,L,M)
2
SJOW 14AWGx2C(for 12,24V)
※A-Type
169
180
156
45.8
63
300±20300±20
35
35.5
4- 4.5ψ
tc
SJOW 17AWGx3C
&H05RN-F 3x1.0mm2
AC/L(Brown)
AC/N(Blue)
FG(Green/Yellow)
SJOW 17AWGx2C&05RN-F 2x1.0mm (for H,L,M)
2
Vo-(Black)
38.3
14
Vo+(Red)
SJOW 14AWGx2C(for 12,24V)
70
22
tc
70
22
tc
150W Constant Power Mode LED Driver XLG-150 series
File Name:XLG-150-SPEC 2019-07-05
※AB-Type
AC/L(Brown)
AC/N(Blue)
FG(Green/Yellow)
INSTALLATION MANUAL
169
180
156
45.8
63
350 20±
300±20
35
35.5
4- 4.5ψ
tc
SJOW 17AWGx3C
&H05RN-F 3x1.0mm2
70
22
tc
DIM-(White)
DIM+( )Blue
Vo+(Red)
Vo-(Black)
SJOW 17AWGx2C
&05RN-F 2x1.0mm2
UL2517 20AWGx2C
300±20
