48
Introduction—Circuit Protection
Circuit breakers in the 9926
Series are cULus listed
according to UL489 and
CSA 22.2 No. 5.02, CE,
VDE. The hydraulic mag-
netic trip mechanism offers
10,000A of interrupting
capacity in 120V and 240V,
50/60Hz applications.
9926 Series
CB4200 Series
CB2200 Series
CB9100 Series
The CB2200 Series feature
integrated alarm contacts
within a narrow profile,
thereby allowing increased
enclosure capacity. All of
these circuit breakers
demonstrate consistent
reliability through 100%
calibration and testing, and
feature a touch safe design
to prevent injury from acci-
dental contact with live
components.
The CB9100 Series of
thermal magnetic circuit
breakers provide a rugged
and industry-standard form
factor (18 mm/pole). For
supplemental circuit
protection.
Weidmuller’s DIN-rail mounted circuit breakers are avail-
able for use in applications where circuit protection must
be able to distinguish between circuit overloads and short
circuits. Each circuit breaker has the ability to be reset
without the need to change components. All circuit
breakers are available with an assortment of jumpers and
marking tags.
The CB4200 Series of
thermal magnetic circuit
breakers feature a push-
button style of trip reset.
This reset provides a
visual indication of status
which allows for rapid
troubleshooting.
49
9926 Series Branch Rated Circuit Breakers–AC Version
Circuit Breakers
Hydraulic Magnetic Type
• Single pole and double pole versions
• 120/240 VAC, 50/60 Hz
• Up to 25A
• Just 13 mm wide
• Mounts on 35mm DIN-rail
•
cULus listed according to UL489 CSA C22.2
No. 5.02, CE, VDE
1000
Tripping Time
Seconds Minutes
100
10
1
10
1
0.1
0.01
0.001
100
105
125
150
200
300
400
500
1000
1500
2000
2500
3000
4000
5000
(%) Rated Current
Operating Characteristics
Curve KM
Ambient Temperature 30°C
Trip Curves—Hydraulic Magnetic Type
Typical time/current characteristics at 30ºC
9926 Series–AC version Trip Curve
Ordering Data Type: Single Pole (up to 120 VAC) Type: Double Pole (up to 240 VAC)
Current Ratings Part No. Current Ratings Part No.
(amps) TS 35 Description (amps) TS 35 Description
0.5 9926251000 QL-1-13-DM-KM-0.5 0.5 9926252000 QL-2-13-DM-KM-0.5
19926251001 QL-1-13-DM-KM-01 1 9926252001 QL-2-13-DM-KM-01
29926251002 QL-1-13-DM-KM-02 2 9926252002 QL-2-13-DM-KM-02
39926251003 QL-1-13-DM-KM-03 3 9926252003 QL-2-13-DM-KM-03
49926251004 QL-1-13-DM-KM-04 4 9926252004 QL-2-13-DM-KM-04
59926251005 QL-1-13-DM-KM-05 5 9926252005 QL-2-13-DM-KM-05
69926251006 QL-1-13-DM-KM-06 6 9926252006 QL-2-13-DM-KM-06
79926251007 QL-1-13-DM-KM-07 7 9926252007 QL-2-13-DM-KM-07
89926251008 QL-1-13-DM-KM-08 8 9926252008 QL-2-13-DM-KM-08
10 9926251010 QL-1-13-DM-KM-10 10 9926252010 QL-2-13-DM-KM-10
13 9926251013 QL-1-13-DM-KM-13 13 9926252013 QL-2-13-DM-KM-13
15 9926251015 QL-1-13-DM-KM-15 15 9926252015 QL-2-13-DM-KM-15
16 9926251016 QL-1-13-DM-KM-16 16 9926252016 QL-2-13-DM-KM-16
20 9926251020 QL-1-13-DM-KM-20 20 9926252020 QL-2-13-DM-KM-20
25 9926251025 QL-1-13-DM-KM-25 25 9926252025 QL-2-13-DM-KM-25
9926 Series
Single Pole
9926 Series
Double Pole
Sample trip characteristics - KM
125% 150% 200% 400% 600% 800% 1000%
minimum 15 8 4 0.7 0.09 0.007 0.005
(sec)
maximum 300 90 28 4 1.5 0.6 0.4
(sec)
Although the 9926 series uses a magnetic only trip mechanism, CSA
testing indicates a trip characteristic similar to thermal magnetic trip
mechanisms. No de-rating is required at elevated temperatures.
Technical Data
Voltage 120/240 VAC, 50/60Hz
Current
minimum 0.5A
maximum 25A
Interrupting capacity 10,000A
Dielectric strength 1500V, 50/60Hz
Insulation resistance 100MM
Operating life 10000 mechanical operations
Operating temperature -40…+65°C
Wire size*
0.5-15A: 14AWG min., 10AWG max.
20-25A: 10AWG min.
Torque 20 in.-lb
Approval
cULus listed according to UL489 CSA C22.2 No. 5.02, CE, VDE
Accessories Part No.
Bus-bar (1 pole, insulated, 1 m) 67101904
Bus-bar (2 pole, insulated, 1 m) 67101972
Bus-bar end cap, 1 pole 67101973
Bus-bar end cap, 2 pole 67101974
Power lug, straight 67101960
Power lug, 90° 67101961
Lock-out handle 67101913
*Wire sizes: gauges specified are the minimum allowable as per CSA
and UL standards.
The 9926 circuit breakers do not have provisions for marking tags.
A possible solution is to cut the adhesive SchS2 tag rail to length
(approximately 20 mm on a single pole unit so the current rating
remains visible or approximately 30 mm on a two pole unit).
The SchS2 accepts DEK, WS and ESG 8/17 marking tags.
The part number for adhesive SchS2 is 1720600000.
19
(0.75)
74
(2.91)
66
(2.6)
17.9
(0.7)
71.4
(2.81)
28.5
(1.12)
5
(0.2)
32
(1.26)
45
(1.77)
64.8
(2.55)
57
(2.24)
13
(0.51)
92.8
(3.65)
26
(1.02)
13
(0.51)
9926 Series AC Version - dimensions in mm (in.)
Additional trip curves and amp ratings are available
upon request.
1000
Tripping Time
Seconds Minutes
100
10
1
10
1
0.1
0.01
0.001
100
105
130
150
200
300
400
500
1000
1500
2000
2500
3000
4000
5000
(%) Rated Current
Operating Characteristics
Curve 1
Ambient Temperature 30°C
9926 Series–AC version Trip Curve
Trip Curve 1 applies to the following part numbers where
"XX" is the current rating:
Single Pole— 99262512XX Double Pole— 99262522XX
50
9926 Series Branch Rated Circuit Breakers–AC Version with Contacts
Type: Double Pole Trip (up to 240 VAC)
Current
Ratings
(amps) Part No. Description
19926272001 QL-T-2-13-DM-KM-1
29926272002 QL-T-2-13-DM-KM-2
59926272005 QL-T-2-13-DM-KM-5
10 9926272010 QL-T-2-13-DM-KM-10
15 9926272015 QL-T-2-13-DM-KM-15
20 9926272020 QL-T-2-13-DM-KM-20
25 9926272025 QL-T-2-13-DM-KM-25
Type: Double Pole Combo (up to 240 VAC)
Current
Ratings
(amps) Part No. Description
19926282001 QL-AT-2-13-DM-KM-1
29926282002 QL-AT-2-13-DM-KM-2
59926282005 QL-AT-2-13-DM-KM-5
10 9926282010 QL-AT-2-13-DM-KM-10
15 9926282015 QL-AT-2-13-DM-KM-15
20 9926282020 QL-AT-2-13-DM-KM-20
25 9926282025 QL-AT-2-13-DM-KM-25
1000
Tripping Time
Seconds Minutes
100
10
1
10
1
0.1
0.01
0.001
100
105
125
150
200
300
400
500
1000
1500
2000
2500
3000
4000
5000
(%) Rated Current
Operating Characteristics
Curve KM
Ambient Temperature 30°C
9926 Series–AC version Trip Curve
Circuit Breakers with
Auxiliary switch, Trip alarm,
Combination of both
• AC voltages (120/240V)
• Single and double pole versions
•
cULus listed according to UL489
and C22.2 No. 5.02, CE, VDE
• Factory fitted auxiliary or trip alarm
• Compact 6.5mm width
• Attached to right hand side of circuit breaker
*Wire sizes: gauges specified are the minimum
allowable as per CSA and UL standards.
The 9926 circuit breakers do not have provisions for
marking tags. A possible solution is to cut the adhesive
SchS2 tag rail to length (approximately 20 mm on a
single pole unit so the current rating remains visible or
approximately 30 mm on a two pole unit). The SchS2
accepts DEK, WS and ESG 8/17 marking tags. The
part number for adhesive SchS2 is 1720600000.
Technical Data
Voltage 120/240 VAC, 50/60Hz
Current
minimum 0.5A
maximum 25A
Interrupting capacity 10,000A
Dielectric strength 1500V, 50/60Hz
Insulation resistance 100MM
Operating life 10000
mechanical operations
Operating temperature -40…+65°C
Wire size*
0.5-15A: 14AWG min., 10AWG max.
20-25A: 10AWG min.
Torque 20 in.-lb
Approval
cULus listed according to UL489 and C22.2
No. 5.02, CE, VDE
9926 Series
Double Pole Trip
(Alarm Contact)
9926 Series
Double Pole Combination
(Auxiliary & Alarm Contact)
Trip Curves—Hydraulic
Magnetic Type Typical
time/current characteristics
at 30ºC
Additional trip curves and
amp ratings are available
upon request.
Type: Double Pole Aux (up to 240 VAC)
Current
Ratings
(amps) Part No. Description
19926262001 QL-A-2-13-DM-KM-1
29926262002 QL-A-2-13-DM-KM-2
59926262005 QL-A-2-13-DM-KM-5
10 9926262010 QL-A-2-13-DM-KM-10
15 9926262015 QL-A-2-13-DM-KM-15
20 9926262020 QL-A-2-13-DM-KM-20
25 9926262025 QL-A-2-13-DM-KM-25
9926 Series
Double Pole
w/ Auxiliary Contact
Type: Single Pole Aux (up to 120 VAC)
Current
Ratings
(amps) Part No. Description
19926261001 QL-A-1-13-DM-KM-1
29926261002 QL-A-1-13-DM-KM-2
59926261005 QL-A-1-13-DM-KM-5
10 9926261010 QL-A-1-13-DM-KM-10
15 9926261015 QL-A-1-13-DM-KM-15
20 9926261020 QL-A-1-13-DM-KM-20
25 9926261025 QL-A-1-13-DM-KM-25
9926 Series
Single Pole
w/ Auxiliary Contact
Type: Single Pole Trip (up to 120 VAC)
Current
Ratings
(amps) Part No. Description
19926271001 QL-T-1-13-DM-KM-1
29926271002 QL-T-1-13-DM-KM-2
59926271005 QL-T-1-13-DM-KM-5
10 9926271010 QL-T-1-13-DM-KM-10
15 9926271015 QL-T-1-13-DM-KM-15
20 9926271020 QL-T-1-13-DM-KM-20
25 9926271025 QL-T-1-13-DM-KM-25
9926 Series
Single Pole Trip
(Alarm Contact)
Type: Single Pole Combo (up to 120 VAC)
Current
Ratings
(amps) Part No. Description
19926281001 QL-AT-1-13-DM-KM-1
29926281002 QL-AT-1-13-DM-KM-2
59926281005 QL-AT-1-13-DM-KM-5
10 9926281010 QL-AT-1-13-DM-KM-10
15 9926281015 QL-AT-1-13-DM-KM-15
20 9926281020 QL-AT-1-13-DM-KM-20
25 9926281025 QL-AT-1-13-DM-KM-25
9926 Series
Single Pole Combination
(Auxiliary & Alarm Contact)
Dual Mount Dimensions in mm (in.)
57.0
(2.24)
26.2
(1.03)
31.3
(1.23)
21.1
(0.83)
21.3
(0.84) 32.9
(1.3)
10.7
(0.42)
(N/O)16
(N/C)18
(C)15
11(C)
12(N/C)
14(N/O)
TRIP ALARM Q. CONNECTORS
2
(0.08)
0.5
(0.02)
5.5
(0.22)
AUX SWITCH Q. CONNECTORS
2.8
(0.11)
0.5
(0.02)
7
(0.28)
51
Accessories
Type Part No.
Bus-bar (1 pole, insulated 1m) 67101904
Bus bar end cap, 1 pole 67101973
Power lug, straight 67101960
Power lug, 90° 67101961
Lock-out handle 67101913
9926 Series Branch Rated Circuit Breakers–DC Version
1000
Tripping Time
Seconds Minutes
100
10
1
10
1
0.1
0.01
0.001
100
130
105
150
200
300
400
500
1000
1500
2000
2500
3000
4000
5000
(%) Rated Current
Operating Characteristics
Curve U2 DC
(4% Ripple Factor)
Ambient Temperature 30°C
9926 Series–DC version Trip Curve
Circuit Breakers
Hydraulic Magnetic Type
• Single pole versions only
• U2 trip curve for general purpose
applications
• 80 and 125 VDC
• Up to 60A
• Just 13 mm wide
• Mounts on 35mm DIN-rail
• UL 489A listed
• VDE
9926 Series
Single Pole
(80 VDC)
Ordering Data Type: Single Pole (80 VDC)
Current
Ratings
(amps) Part No. Description
0.5 9926251900 QY-1-13-DM-U2-0.5
19926251901 QY-1-13-DM-U2-01
29926251902 QY-1-13-DM-U2-02
39926251903 QY-1-13-DM-U2-03
49926251904 QY-1-13-DM-U2-04
59926251905 QY-1-13-DM-U2-05
10 9926251910 QY-1-13-DM-U2-10
15 9926251915 QY-1-13-DM-U2-15
20 9926251920 QY-1-13-DM-U2-20
25 9926251925 QY-1-13-DM-U2-25
30 9926251930 QY-1-13-DM-U2-30
35 9926251935 QY-1-13-DM-U2-35
40 9926251940 QY-1-13-DM-U2-40
45 9926251945 QY-1-13-DM-U2-45
50 9926251950 QY-1-13-DM-U2-50
60 9926251960 QY-1-13-DM-U2-60
Technical Data
Voltage 80,125 VDC
Current
minimum 0.5 A
maximum 60 A
Interrupting capacity 10,000 A
Dielectric strength 1500 V, 50/60 Hz
Insulation resistance 100 MM
Operating life 10000
mechanical operations
Operating temperature -40…+65°C
Wire size*
1-15A: 14 AWG min.,
10 AWG max.
20-25A: 10 AWG min.
Torque 20 in.-lb
Approval
UL 489A Listed, CE, VDE
*Wire sizes: gauges specified are the minimum allow-
able as per CSA and UL standards.
The 9926 circuit breakers do not have provisions for
marking tags. A possible solution is to cut the adhesive
SchS2 tag rail to length (approximately 20 mm on a
single pole unit so the current rating remains visible or
approximately 30 mm on a two pole unit). The SchS2
accepts DEK, WS and ESG 8/17 marking tags. The
part number for adhesive SchS2 is 1720600000.
19
(0.75)
74
(2.91)
66
(2.6)
17.9
(0.7)
71.4
(2.81)
28.5
(1.12)
5
(0.2)
32
(1.26)
45
(1.77)
64.8
(2.55)
57
(2.24)
13
(0.51)
92.8
(3.65)
9926 Series
Single Pole
(125 VDC)
Type: Single Pole (125 VDC)
Current
Ratings
(amps) Part No. Description
19926251801 QY-1-13-DM-U2-01-B1
29926251802 QY-1-13-DM-U2-02-B1
39926251803 QY-1-13-DM-U2-03-B1
49926251804 QY-1-13-DM-U2-04-B1
59926251805 QY-1-13-DM-U2-05-B1
10 9926251810 QY-1-13-DM-U2-10-B1
15 9926251815 QY-1-13-DM-U2-15-B1
20 9926251820 QY-1-13-DM-U2-20-B1
25 9926251825 QY-1-13-DM-U2-25-B1
30 9926251830 QY-1-13-DM-U2-30-B1
35 9926251835 QY-1-13-DM-U2-35-B1
40 9926251840 QY-1-13-DM-U2-40-B1
45 9926251845 QY-1-13-DM-U2-45-B1
50 9926251850 QY-1-13-DM-U2-50-B1
60 9926251860 QY-1-13-DM-U2-60-B1
Dimensions in mm (in.)
Trip Curves—Hydraulic
Magnetic Type Typical
time/current characteristics
at 30ºC
Additional trip curves and amp ratings
are available upon request.
52
Type: Single Pole (up to 277 VAC) Type: Double Pole (up to 480 VAC) Type: Triple Pole (up to 480 VAC)
Current Current Current
Ratings Rating Rating
(amps) Part No. Description (amps) Part No. Description (amps) Part No. Description
19926251501 QZ-1-13-D-2-01 1 9926252501 QZ-2-13-D-2-01 10 9926253510 QZ-3-13-D-2-10
29926251502 QZ-1-13-D-2-02 2 9926252502 QZ-2-13-D-2-02 15 9926253515 QZ-3-13-D-2-15
39926251503 QZ-1-13-D-2-03 4 9926252504 QZ-2-13-D-2-04 20 9926253520 QZ-3-13-D-2-20
49926251504 QZ-1-13-D-2-04 5 9926252505 QZ-2-13-D-2-05 25 9926253525 QZ-3-13-D-2-25
59926251505 QZ-1-13-D-2-05 6 9926252506 QZ-2-13-D-2-06 30 9926253530 QZ-3-13-D-2-30
69926251506 QZ-1-13-D-2-06 10 9926252510 QZ-2-13-D-2-10 40 9926253540 QZ-3-13-D-2-40
89926251508 QZ-1-13-D-2-08 15 9926252515 QZ-2-13-D-2-15 50 9926253550 QZ-3-13-D-2-50
10 9926251510 QZ-1-13-D-2-10 20 9926252520 QZ-2-13-D-2-20 60 9926253560 QZ-3-13-D-2-60
15 9926251515 QZ-1-13-D-2-15 25 9926252525 QZ-2-13-D-2-25
20 9926251520 QZ-1-13-D-2-20 30 9926252530 QZ-2-13-D-2-30
25 9926251525 QZ-1-13-D-2-25 35 9926252535 QZ-2-13-D-2-35
35 9926251535 QZ-1-13-D-2-35 40 9926252540 QZ-2-13-D-2-40
40 9926251540 QZ-1-13-D-2-40 50 9926252550 QZ-2-13-D-2-50
50 9926251550 QZ-1-13-D-2-50 60 9926252560 QZ-2-13-D-2-60
60 9926251560 QZ-1-13-D-2-60
9926 Series Supplemental Circuit Breakers
Circuit Breakers
Hydraulic Magnetic Type
• AC Voltages 277/480V
• Trip curve 2 for general purpose
applications
• UL 1077 recognized
• VDE approved and CE marked
• Just 13 mm wide
• Mounts to 35 mm DIN-rail
• Factory fitted auxiliary or trip alarm
• Single, double and triple pole versions
1000
Tripping Time
Seconds Minutes
100
10
1
10
1
0.1
0.01
0.001
100
130
105
150
200
300
400
500
1000
1500
2000
2500
3000
4000
5000
(%) Rated Current
Operating Characteristics
Curve 2
Ambient Temperature 30°C
9926 Series–Supplemental Trip Curve
9926 Series
Triple Pole
9926 Series
Double Pole
9926 Series
Single Pole
Accessories
Type Part No.
Bus bar (1 pole, insulated 1m) 67101904
Bus bar (2 pole, insulated 1m) 67101972
Bus bar (3 pole, insulated 1m) 67101971
Bus bar end cap, 1 pole 67101973
Bus bar end cap, 2 pole or 3 pole 67101974
Power lug, straight 67101960
Power lug, 90° 67101961
Lock-out handle 67101913
Ordering Data
Technical Data
Voltage 277/480 VAC @ 50/60 Hz
Current
minimum 0.5 A
maximum 60 A
Interrupting capacity 5 kA @ 277/480 V, 5 kA @ 120 V, 5 kA @ 240 V
Dielectric strength 1500 V, 50/60 Hz
Insulation resistance 100 MM
Operating life 10000 mechanical operations
Operating temperature -40…+65°C
Wire size*
1-15A: 14 AWG min., 10 AWG max.
20-25A: 10 AWG min.
Torque 20 in.-lb
Approval
†UL 1077 Recognized, VDE (EN 60947-2) Approved, CSA C22.2 No. 235, CE Marked
*Wire sizes: gauges specified are the minimum allowable as per CSA and UL standards.
The 9926 circuit breakers do not have provisions for marking tags. A possible solution is to cut the adhesive
SchS2 tag rail to length (approximately 20 mm on a single pole unit so the current rating remains visible or
approximately 30 mm on a two pole unit).The SchS2 accepts DEK, WS and ESG 8/17 marking tags.
The part number for adhesive SchS2 is 1720600000.
†cURus recognized to UL1077 and C22.2 No. 235
Additional trip curves and
amp ratings are available
upon request.
Trip Curves—Hydraulic
Magnetic Type Typical
time/current characteristics
at 30ºC
9926 Series Supplemental – dimensions in mm (in.)
65
(2.56)
60
(2.36)
22.5
(0.86)
25.9
(0.94)
45
(1.77)
44
(1.73)
63.8
(2.51)
73
(2.87)
5.0
(0.2)
13
(0.51)
92.8
(3.65)
26
(1.02)
13
(0.51)
13
(0.51)
39
(1.54)
53
1000
Tripping Time
Seconds Minutes
100
10
1
10
1
0.1
0.01
0.001
100
130
105
150
200
300
400
500
1000
1500
2000
2500
3000
4000
5000
(%) Rated Current
Operating Characteristics
Curve 2
Ambient Temperature 30°C
†cURus recognized to UL1077 and C22.2 No. 235
Trip Curves—Hydraulic
Magnetic Type Typical
time/current characteristics
at 30ºC
Type: Double Pole Trip (up to 480 VAC)
Current
Ratings
(amps) Part No. Description
19926272501 QZ-T-2-13-D-2-01
29926272502 QZ-T-2-13-D-2-02
59926272505 QZ-T-2-13-D-2-05
10 9926272510 QZ-T-2-13-D-2-10
15 9926272515 QZ-T-2-13-D-2-15
20 9926272520 QZ-T-2-13-D-2-20
25 9926272525 QZ-T-2-13-D-2-25
Type: Double Pole Combo (up to 480 VAC)
Current
Ratings
(amps) Part No. Description
19926282501 QZ-AT-2-13-D-2-01
29926282502 QZ-AT-2-13-D-2-02
59926282505 QZ-AT-2-13-D-2-05
10 9926282510 QZ-AT-2-13-D-2-10
15 9926282515 QZ-AT-2-13-D-2-15
20 9926282520 QZ-AT-2-13-D-2-20
25 9926282525 QZ-AT-2-13-D-2-25
9926 Series
Double Pole Trip
(Alarm Contact)
9926 Series
Double Pole Combination
(Auxiliary & Alarm Contact)
Type: Double Pole Aux (up to 480 VAC)
Current
Ratings
(amps) Part No. Description
19926262501 QZ-A-2-13-D-2-01
29926262502 QZ-A-2-13-D-2-02
59926262505 QZ-A-2-13-D-2-05
10 9926262510 QZ-A-2-13-D-2-10
15 9926262515 QZ-A-2-13-D-2-15
20 9926262520 QZ-A-2-13-D-2-20
25 9926262525 QZ-A-2-13-D-2-25
9926 Series
Double Pole
w/ Auxiliary Contact
Type: Single Pole Aux (up to 277 VAC)
Current
Ratings
(amps) Part No. Description
19926261501 QZ-A-1-13-D-2-01
29926261502 QZ-A-1-13-D-2-02
59926261505 QZ-A-1-13-D-2-05
10 9926261510 QZ-A-1-13-D-2-10
15 9926261515 QZ-A-1-13-D-2-15
20 9926261520 QZ-A-1-13-D-2-20
25 9926261525 QZ-A-1-13-D-2-25
9926 Series
Single Pole
w/ Auxiliary Contact
Type: Single Pole Trip (up to 277 VAC)
Current
Ratings
(amps) Part No. Description
19926271501 QZ-T-1-13-D-2-01
29926271502 QZ-T-1-13-D-2-02
59926271505 QZ-T-1-13-D-2-05
10 9926271510 QZ-T-1-13-D-2-10
15 9926271515 QZ-T-1-13-D-2-15
20 9926271520 QZ-T-1-13-D-2-20
25 9926271525 QZ-T-1-13-D-2-25
9926 Series
Single Pole Trip
(Alarm Contact)
Type: Single Pole Combo (up to 277 VAC)
Current
Ratings
(amps) Part No. Description
19926281501 QZ-AT-1-13-D-2-01
29926281502 QZ-AT-1-13-D-2-02
59926281505 QZ-AT-1-13-D-2-05
10 9926281510 QZ-AT-1-13-D-2-10
15 9926281515 QZ-AT-1-13-D-2-15
20 9926281520 QZ-AT-1-13-D-2-20
25 9926281525 QZ-AT-1-13-D-2-25
9926 Series
Single Pole Combination
(Auxiliary & Alarm Contact)
9926 Series Supplemental Circuit Breakers with Contacts
Type: Triple Pole Trip (up to 480 VAC)
Current
Ratings
(amps) Part No. Description
19926273501 QZ-T-3-13-D-2-01
29926273502 QZ-T-3-13-D-2-02
59926273505 QZ-T-3-13-D-2-05
10 9926273510 QZ-T-3-13-D-2-10
15 9926273515 QZ-T-3-13-D-2-15
20 9926273520 QZ-T-3-13-D-2-20
25 9926273525 QZ-T-3-13-D-2-25
Type: Triple Pole Combo (up to 480 VAC)
Current
Ratings
(amps) Part No. Description
19926283501 QZ-AT-3-13-D-2-01
29926283502 QZ-AT-3-13-D-2-02
59926283505 QZ-AT-3-13-D-2-05
10 9926283510 QZ-AT-3-13-D-2-10
15 9926283515 QZ-AT-3-13-D-2-15
20 9926283520 QZ-AT-3-13-D-2-20
25 9926283525 QZ-AT-3-13-D-2-25
9926 Series
Triple Pole Trip
( Alarm Contact)
9926 Series
Triple Pole Combination
(Auxiliary & Alarm Contact)
Type: Triple Pole Aux (up to 480 VAC)
Current
Ratings
(amps) Part No. Description
19926263501 QZ-A-3-13-D-2-01
29926263502 QZ-A-3-13-D-2-02
59926263505 QZ-A-3-13-D-2-05
10 9926263510 QZ-A-3-13-D-2-10
15 9926263515 QZ-A-3-13-D-2-15
20 9926263520 QZ-A-3-13-D-2-20
25 9926263525 QZ-A-3-13-D-2-25
9926 Series
Triple Pole
w/ Auxiliary Contact
Circuit Breakers
Auxiliary switch, Trip alarm,
Combination of both
• AC Voltages 277/480V
• Trip curve 2 for general purpose
applications
• UL 1077 recognized
• VDE approved and CE marked
• Just 13 mm wide
• Mounts to 35 mm DIN-rail
• Factory fitted auxiliary or trip alarm
• Single, double and triple pole versions
9926 Series–Supplemental Trip Curve
Technical Data
Voltage 277/480 VAC @ 50/60 Hz
Current
minimum 0.5 A
maximum 60 A
Interrupting capacity 5 kA @ 277/480 V,
5 kA @ 120 V, 5 kA @ 240 V
Dielectric strength 1500 V, 50/60 Hz
Insulation resistance 100 MM
Operating life 10000
mechanical operations
Operating temperature -40…+65°C
Wire size*
1-15A: 14 AWG min., 10 AWG max.
20-25A: 10 AWG min.
Torque 20 in.-lb
Approval
†UL 1077 Recognized, VDE (EN 60947-2)
Approved, CSA C22.2 No. 235, CE Marked
*Wire sizes: gauges specified are the minimum allow-
able as per CSA and UL standards.
The 9926 circuit breakers do not have provisions for
marking tags. A possible solution is to cut the adhesive
SchS2 tag rail to length (approximately 20 mm on a
single pole unit so the current rating remains visible or
approximately 30 mm on a two pole unit). The SchS2
accepts DEK, WS and ESG 8/17 marking tags.The
part number for adhesive SchS2 is 1720600000.
54
9926 Series Supplemental Circuit Breakers–GFCI
Trip Curves—Hydraulic Magnetic
Type Typical
time/current characteristics
at 30ºC
Type: Single Pole GFCI
Current
Ratings
(amps) Part No. Description
59926291105 QF17A2505 - CB W/GFI
10 9926291110 QF17A2510 - CB W/GFI
15 9926291115 QF17A2515 - CB W/GFI
20 9926291120 QF17A2520 - CB W/GFI
25 9926291125 QF17A2525 - CB W/GFI
30 9926291130 QF17A2530 - CB W/GFI
50 9926291150 QF17A2550 - CB W/GFI
9926 Series
GFCI
Ground Fault Current Interrupt
• CE approved
• UL1077 and UL1053 recognized
• Small frame size (26mm wide)
• Single pole plus switched neutral
ground leakage protection
• Trip point is unaffected by ambient
temperature
• Current ratings up to 50A
• Trip indication
(mid trip handle position)
• Trip curve 2 for general purpose
applications
Ordering Data
9926 Series–AC version Trip Curve
9926 Series GFCI – dimensions in mm (in.)
Technical Data
Standard Ampere Ratings (A) 5 to 50A
Sensitivity (mA) 30 (CE) / 22 (UL)
Number of Poles 1 + N
Equipment Type Ground Leakage/GFCS
Rated Voltage (V) 230 (CE) / 240 (UL)
Rated Interrupting/ 5 kA
Withstand Capacity (kA) –
Weight (kg) 0.26
Trip Curve (standard) 2
Operating Temperature -40 to +65ºC
Approval
UL 1077 and UL 1053, CE
1000
Tripping Time
Seconds Minutes
100
10
1
10
1
0.1
0.01
0.001
100
130
105
150
200
300
400
500
1000
1500
2000
2500
3000
4000
5000
(%) Rated Current
Operating Characteristics
Curve 2
Ambient Temperature 30°C
82.4
(3.24)
93
(3.66)
73
(2.87)
65
(2.56)
26
(1.02)
26
(1.02)
16.4
(0.646)
35.7
(1.406)
8.0
(0.315)
44
(1.73)
68.8
(2.71)
71.4
(2.81)
7.8
(0.307)
57(2.24)
55
9926251000
Amperage
"00" - 0.5A
"01" - 1A
"02" - 2A
"60" - 60A
Type
"5" - Base Breaker
"6" - With Auxiliary Contact
"7" - With Trip Alarm Contact
"8" - Combo Aux/Trip Contact
"9" - GFCI
Poles
1 Pole
2 Pole
3 Pole
Trip Curves (Types 5-9)
"0" - Branch AC KM (Standard)
"1" - Branch AC OP (Instantaneous)
"2" - Branch AC 1 (Fast)
"3" - Supplemental 9 (Slow)
"4" - Branch 80VDC 1 (Fast)
"5" - Supplemental 2 (Standard)
"6" - Branch 125VDC OP (Instantaneous)
"7" - Branch 80VDC OP (Instantaneous)
"8" - Branch 125VDC U2 (Standard)
"9" - Branch 80VDC U2 (Standard)
/
Part Number Table - Example
To order 9926 Series Single Pole Circuit Breaker
Part No. 9926251100
• Current Rating of 1.0 amp
• Internal Resistance per Pole of 1.1 ohms
• Trip Curve – M1, Medium (Standard)
9926 Series Mounting Options and Accessories
D
O
W
N
D
O
W
N
V
E
R
T
4
5
4
5
V
E
R
T
4
5
U
P
H
O
R
I
Z
H
O
R
I
Z
4
5
U
P
9
3
%
9
5
%
1
0
0
%
1
0
5
%
1
0
7
%
1
0
5
%
1
0
0
%
9
5
%
O
F
F
O
N
O
F
F
O
N
O
F
F
O
N
O
F
F
O
N
O
F
F
O
N
O
F
F
O
N
O
F
F
O
N
O
F
F
O
N
Mounting Options
If the product is not vertically mounted in the normal DIN-rail
mounting orientation, a rating factor must be applied. Figure 1
shows a diagram of the rating factor to apply. The published
curves for these circuit breaker products are produced with
the circuit breaker in the vertical mounting position. The rating
factor only applies to the must hold and must trip points of the
curve as the other parts (instantaneous trip point) stay largely
unaffected.
It is important to note that in environments that are exposed to
a high degree of vibration, the cables that connect to the circuit
breaker must be securely held in place, as the breaker is not
designed to carry the weight of the cables. A maximum of 35N
can be applied to the terminal area, in a direction perpendicular
to the mounting axis.
Accessories
Technical Data
Current Rating 80A max.
Voltage 500V max.
Short Circuit Strength 25kA
Type Part No.
Bus bar (1 pole, insulated 1m) 67101904
Bus bar (2 pole, insulated 1m) 67101972
Bus bar (3 pole, insulated 1m) 67101971
Type Part No.
Bus bar end cap, 1 pole 67101973
Bus bar end cap, 2 pole or 3 pole 67101974
Technical Data
Current Rating 85A max.
Wire Size 10 AWG min., 4 AWG max.
Dimensions A: 6 mm B: 32 mm
Type Part No.
Power lug, straight 67101960
Power lug, 90° 67101961
Type Part No.
Lock-out handle 67101913
9926241000
Amperage
"00" - 0.5A
"01" - 1A
"02" - 2A
"60" - 60A
Type
"4" - Base Breaker
Poles
1 Pole
2 Pole
3 Pole
/
Trip Curves (Type 4)
"0" - Supplemental 1 (Fast)
56
CB4200 Series Supplemental Circuit Breakers
CB4200 Series
Single Pole
CB4200 Series
Double Pole
Circuit Breakers
Thermal Magnetic Type
• Rated from 0.05 to 16.0 amps
• Available in single or double pole configurations
• Features a tease free design to reduce contact
damage
• Offers push button trip/reset function
• Trip free design means the breaker cannot be held
closed against a fault
• Mounts on 32mm* or 35mm DIN-rail
• UL 1077 recognized
Ordering Data Type: Single Pole Type: Double Pole
Current Part No. TS 35 Current Part No. TS 35
Ratings *For TS 32 Rail, Ratings *For TS 32 Rail,
(amps) see adapter below (amps) see adapter below
0.05 9124083500 0.05 9124223500
0.08 9124653500 0.08 9124233500
0.1 9104173500 0.1 9120353500
0.2 9104183500 0.2 9124243500
0.3 9129813500 0.3 9124263500
0.4 9124093500 0.4 9124273500
0.5 9101003500 0.5 9129583500
0.6 9124113500 0.6 9124283500
0.7 9129563500 0.7 9124293500
0.8 9101103500 0.8 9129593500
1.0 9101203500 1.0 9129613500
1.2 9101303500 1.2 9129623500
1.3 9124123500 1.3 9124313500
1.4 9124133500 1.4 9124323500
1.5 9101403500 1.5 9129633500
1.8 9124143500 1.8 9124333500
2.0 9101503500 2.0 9129643500
2.5 9101603500 2.5 9129653500
3.0 9101703500 3.0 9129663500
3.5 9124163500 3.5 9124343500
4.0 9104353500 4.0 9129713500
4.5 9124173500 4.5 9124353500
5.0 9101803500 5.0 9129673500
5.5 9107833500 5.5 9124363500
6.0 9103813500 6.0 9124373500
6.5 9120043500 6.5 9124383500
7.0 9104153500 7.0 9124393500
8.0 9103003500 8.0 9104673500
9.0 9104613500 9.0 9124423500
10.0 9101903500 10.0 9129683500
11.0 9124183500 11.0 9124433500
12.0 9107843500 12.0 9124443500
13.0 9124193500 13.0 9124453500
14.0 9107853500 14.0 9124463500
15.0 9102003500 15.0 9129693500
16.0 9124213500 16.0 9124473500
0.8 1 2 3 4 6 8 10 20 30 50 70 100
0.001
0.01
0.1
1
10
100
1,000
10,000
… times rated current
Trip time in seconds
–30°C
+23°C
+55°C
M1+ 0.05 to 7.5 A
0.8 1 2 3 4 6 8 10 20 30 50 70 100
0.001
0.01
0.1
1
10
100
1,000
10,000
… times rated current
Trip time in seconds
–30°C
+23°C
+55°C
M1+ 8 to 16 A
Trip Curves
Thermal Magnetic Type
Typical time/current characteristics at 23ºC
CB4200 Series *Adapter foot – dimensions in mm (in.)
9102100000
TS32 adapter
20
(.787)
57
CB4200 Series Supplemental Circuit Breakers
Technical Data
Rated voltage & current†
UL
CSA
VDE
Creepage resistance
Dielectric strength
Insulation resistance
Interrupting capacity
(VDE 0660, Part 101, P-2)
Interrupting capacity; 4201
(UL 1077/EN 60934 PC1)
Typical life at 2 x rated current
Shock
Torq u e
Vibration
Temperature range
Corrosion
Humidity
Weight
Wire size (UL)
Accessories
Jumpers
Daisy Chain 50*
Straight CQB**
insulated
Angled CQB**
insulated
Adapter foot (for TS 32 Rail)
Marking Tags
Special print only
Consecutive horizontal
Consecutive vertical
Voltage Ratings Current Ratings
AC 250 V, DC 65 V, 50/60 Hz 0.05…16 A
AC 250 V, DC 65 V, 50/60 Hz 0.05…16 A
AC 250 V, DC 65 V, 50/60 Hz 0.05…16 A
PTI 600 to IEC 112
4,000 VAC; IEC 664 & 664 A
> 100 MM(DC 500 V)
4201-10 Maximum capacity
0.05…0.8 A Self-limiting
1…2 A 200 A
2.5…16 A 400 A
Rated current Rated voltage Maximum capacity
0.05…2.0 A AC 250 V 200 A
2.0…16 A AC 250 V 200 A
20 A AC 125 V 400 A
5,000 operations
25 g (11 ms) to IEC 68-2-27, Test Ea
1.2 Nm
5 g (57 to 500 Hz / ±0.38 mm, 10 to 57 Hz) to IEC 68-2-6, Test Fc
-30°C…+55°C (-22°F…+131°F)
96 hours at 5% salt spray, to IEC 68-2-11, Test Ka
240 hours at 95% RH, to IEC 68-2-3, Test Ca
60 g per pole
#20…8 AWG solid/0.5…6 mm2
Type Part No.
BDC 50 9970290000
CQB 2 9970560000
CQB 3 9970570000
CQB 4 9970580000
CQB 10 9970590000
CQB 2 9970600000
CQB 3 9970610000
CQB 4 9970620000
CQB 10 9970630000
MCBAF/TS 32 9102100000
WS 8/5 MC 1640750000***
DEK 5/5 0473460001
DEK 5/5 0473560001
†Note: Resistive and inductive loads (0.05 - 16 A)
*BDC will accommodate 20 A per pin, 20 A total
**CQB will accommodate 18 A per pin, 18 A total; dedicated to 4201 Series
***Please specify horizontal or vertical print when ordering.
Standard quantity = 144 tags per card.
Internal Wiring Diagram
Internal Wiring Diagram
CB4200 Series
Single Pole
CB4200 Series
Double Pole
Dimensions in mm
Dimensions in mm
Note: Part numbers are shown
for a single card of pre-printed
tags numbered 1-50.
58
CB2200 Series Supplemental Circuit Breakers
CB2200 Series
Single Pole
CB2200 Series
Double Pole
CB2200 Series
Triple Pole
Ordering Data Type: Single Pole* Type: Double Pole Type: Triple Pole
Current Ratings N/O Aux. Current Ratings N/O-N/C Current Ratings N/O-N/C
(amps) Part No. (amps) Part No. (amps) Part No.
0.1 9911010005 0.1 9912010003 0.1 9913010003
0.2 9911020005 0.2 9912020003 0.2 9913020003
0.3 9911030005 0.3 9912030003 0.3 9913030003
0.4 9911040005 0.4 9912040003 0.4 9913040003
0.5 9911050005 0.5 9912050003 0.5 9913050003
0.6 9911060005 0.6 9912060003 0.6 9913060003
0.8 9911080005 0.8 9912080003 0.8 9913080003
1.0 9911100005 1.0 9912100003 1.0 9913100003
1.5 9911150005 1.5 9912150003 1.5 9913150003
2.0 9911200005 2.0 9912200003 2.0 9913200003
2.5 9911250005 2.5 9912250003 2.5 9913250003
3.0 9911300005 3.0 9912300003 3.0 9913300003
4.0 9911400005 4.0 9912400003 4.0 9913400003
5.0 9911500005 5.0 9912500003 5.0 9913500003
6.0 9911600005 6.0 9912600003 6.0 9913600003
8.0 9911800005 8.0 9912800003 8.0 9913800003
10 9921100005 10 9922100003 10 9923100003
12 9921120005 12 9922120003 12 9923120003
15 9921150005 15 9922150003 15 9923150003
16 9921160005 16 9922160003 16 9923160003
18 9921180005 18 9922180003 18 9923180003
20 9921200005 20 9922200003 20 9923200003
25 9921250005
32 9921320005
*All part numbers with N/O Auxiliary Contacts on each pole when the main breaker contact is open (in the OFF position)
Circuit Breakers
Thermal Magnetic Type
• Rated from 0.1 to 32.0 amps
• Available in single, double and triple
pole configurations
• Offers normally open (N/O) and normally
closed (N/C) auxiliary contacts
• Lever-switch trip/reset function
• Mounts on 32mm or 35mm DIN-rail
• UL 1077 recognized
Ordering Data Type: Single Pole Type: Double Pole Type: Triple Pole
Current Ratings Current Ratings Current Ratings
(amps) Part No. (amps) Part No. (amps) Part No.
0.1 9911010000 0.1 9912010000 0.1 9913010000
0.2 9911020000 0.2 9912020000 0.2 9913020000
0.3 9911030000 0.3 9912030000 0.3 9913030000
0.4 9911040000 0.4 9912040000 0.4 9913040000
0.5 9911050000 0.5 9912050000 0.5 9913050000
0.6 9911060000 0.6 9912060000 0.6 9913060000
0.8 9911080000 0.8 9912080000 0.8 9913080000
1.0 9911100000 1.0 9912100000 1.0 9913100000
1.5 9911150000 1.5 9912150000 1.5 9913150000
2.0 9911200000 2.0 9912200000 2.0 9913200000
2.5 9911250000 2.5 9912250000 2.5 9913250000
3.0 9911300000 3.0 9912300000 3.0 9913300000
4.0 9911400000 4.0 9912400000 4.0 9913400000
5.0 9911500000 5.0 9912500000 5.0 9913500000
6.0 9911600000 6.0 9912600000 6.0 9913600000
8.0 9911800000 8.0 9912800000 8.0 9913800000
10 9921100000 10 9922100000 10 9923100000
12 9921120000 12 9922120000 12 9923120000
15 9921150000 15 9922150000 15 9923150000
16 9921160000 16 9922160000 16 9923160000
18 9921180000 18 9922180000 18 9923180000
20 9921200000 20 9922200000 20 9923200000
25 9921250000 25 9922250000 25 9923250000
32 9921320000 32 9922320000 32 9923320000
All part numbers with N/C Auxiliary Contacts on each pole when the main breaker contact is open (in the OFF position)
59
Technical Data
Rated voltage & current†
UL
CSA
VDE
Auxiliary contacts
Creepage resistance
Dielectric strength
Insulation resistance
Interrupting capacity
(VDE 0660, Part 101, P-2)
Interrupting capacity
(UL 1077/EN 60934 PC1)
Typical life at 2 x rated current
Shock
Torque Nm (lb. in.)
Vibration
Temperature range
Corrosion
Humidity
Weight
Wire size (UL)
Accessories
Jumpers Daisy Chain 50
Busbars
Marking Tags
Special print only
Consecutive horizontal
Consecutive vertical
CB2200 Series Supplemental Circuit Breakers
Voltage Ratings Current Ratings
277 / 480 VAC (50/60 Hz); 65 VDC 0.1…32 A
277 / 480 VAC (50/60 Hz); 65 VDC 0.1…32 A
250 / 415 VAC / 65 VDC 0.1…32 A
250 VAC / 65 VDC, 1 A
PTI 600 to IEC 112
3,000 VAC; IEC 664 & 664 A
> 100 MM(DC 500 V)
Rated current Rated voltage Rupture capacity (3 times)
0.05…0.8 A 250 / 415 VAC 400 A
6…32 A 250 / 415 VAC 800 A
Rated current Rated voltage Max. rupture capacity (3 times)
0.1…16 A 277 / 480 VAC 5000 A
20…32 A 277 / 480 VAC 2000 A
0.1…32 A 65 VDC 2000 A
5,000 operations
25 g (11 ms) to IEC 68-2-27, Test Ea
0.6 (5.3) Auxiliary contact: 0.5 (4.4)
5 g (57 to 500 Hz / ±0.38 mm, 10 to 57 Hz) to IEC 68-2-6, Test Fc
-30…+60°C (-22°F…+140°F)
96 hours at 5% salt spray, to IEC 68-2-11, Test Ka
240 hours at 95% RH, to IEC 68-2-3, Test Ca
Approximately 60 g per pole
max 6 mm2…8 AWG max 1.5 mm2…14 AWG (Aux. contact)
Type Part No.
BDC 50, 20 A maximum 9970290000
1 pole (CB2200) 9986510000
2 pole (CB2200) 9987360000
DEK 5/6 0490360000*
DEK 5/6 0468660001
DEK 5/6 0468760001
CB2200 Series
123456
Dimensions in mm
†Note: Resistive and inductive loads (0.05 - 16 A)
*Please specify horizontal or vertical print when ordering.
Note: Part numbers shown are for a single
card of pre-printed tags numbered 1-50.
Trip Curves—Thermal Magnetic Type
Typical time/current characteristics at 23ºC
CB2200 Series
F1 0.1 to 32 A
1
.8 123468
10 20 30 50 70 100
0.001
0.01
0.1
10
100
1,000
10,000
…times rated current
Trip time in seconds
–30°C
+23°C
+55°C
10
T
-M1 0.1 to 7.5 A
DC
AC
.8 123468
10 20 30 50 70 100
0.001
0.01
0.1
10
100
1,000
10,000
…times rated current
Trip time in seconds
–30°C
AC +23°C
DC +23°C
+55°C
.8 123468
10 20 30 50 70 100
0.001
0.01
0.1
1
10
100
1,000
10,000
…times rated current
Trip time in seconds
–30°C
+23°C
+55°C
-T1 8 to 32 A
-T1 0.1 to 7.5 A
.8 123468
10 20 30 50 70 100
0.001
0.01
0.1
10
100
1,000
10,000
…times rated current
Trip time in seconds
–30°C
+23°C
+55°C
-M1 8 to 32 A
DC
AC
.8 123468
10 20 30 50 70 100
0.001
0.01
0.1
10
100
1,000
10,000
…times rated current
Trip time in seconds
–30°C
AC +23°C
DC +23°C
+55°C
60
CB9100 Series Supplemental Circuit Breakers
Circuit Breakers
Thermal Magnetic Type
• Rated from 0.5 to 63 amps
• Available in single, double and triple
pole configurations
• Optional auxiliary contacts
• Mounts on 35mm DIN-rail
• UL and CSA approvals
• CSA 277 VAC (1 pole) or
480 VAC (2 and 3 pole)
• 50 VDC (0.5 A to 50 A) 1 pole
• 110 VDC (0.5 A to 50 A) 2 pole
CB9100 Series
Single Pole
CB9100 Series
Double Pole
CB9100 Series
Triple Pole
Ordering Data Type: Single Pole Type: Double Pole Type: Triple Pole
Current Ratings Current Ratings Current Ratings
(amps) Part No. (amps) Part No. (amps) Part No.
0.5 9925350000 0.5 9925650000 0.5 9925810000
1.0 9925360000 1.0 9925660000 1.0 9925820000
2.0 9925380000 2.0 9925680000 2.0 9925840000
3.0 9925390000 3.0 9925690000 3.0 9925850000
4.0 9925400000 4.0 9925700000 4.0 9925860000
6.0 9925410000 6.0 9925710000 6.0 9925870000
10.0 9925430000 10.0 9925730000 10.0 9925890000
13.0 9929820000 13.0 9929830000 13.0 9929840000
16 9925440000 16 9925740000 16 9925900000
20 9925450000 20 9925750000 20 9925910000
25 9925460000 25 9925760000 25 9925920000
32 9925470000 32 9925770000 32 9925930000
40 9925480000 40 9925780000 40 9925940000
50 9925490000 50 9925790000 50 9925950000
63 9925500000 63 9925800000 63 9925960000
Trip Curves
Thermal Magnetic Type
Typical time/current characteristics at 23°C
0.8 1 2 3 4 6 8 10 20 30 50 70 100
0.001
0.01
0.1
1
10
100
1,000
10,000
… times rated current
Trip time in seconds
23°C
M1 0.5 to 6 A
0.8 1 2 3 4 6 8 10 20 30 50 70 100
0.001
0.01
0.1
1
10
100
1,000
10,000
… times rated current
Trip time in seconds
23°C
M1 AC 10 to 40 A
0.8 1 2 3 4 6 8 10 20 30 50 70 100
0.001
0.01
0.1
1
10
100
1,000
10,000
… times rated current
Trip time in seconds
23°C
M1 AC 63 A
CB9100 Series
61
CB9100 Series Supplemental Circuit Breakers
Technical Data
Rated voltage & current
UL 1077
CSA C 22.2 No. 235
VDE
Creepage resistance
Insulation resistance
Interrupting capacity
(UL 1077/EN 609334 PC1) 1 pole
Mechanical/Electrical endurance
Shock
Torq u e
Vibration
Temperature range - operating
Weight
Strip length
Auxiliary contact rating
Wire size - #22…12 AWG
Wire size
Accessories
Jumpers
Auxiliary contacts
SPDT
Security hardware
Marking Tags
Adhesive label
277 V (1 pole) 480 V (2 and 3 pole) 50 VDC (1 pole) 110 VDC (2 pole)
277 V (1 pole) 480 V (2 and 3 pole) 50 VDC (1 pole) 110 VDC (2 pole)
PTI 250 to IEC 112
>100 MMat 500 VDC
Current ratings Interrupting Rupture capacity (3X) Voltage
0.5...63 A 10,000 A (UL) 277 VAC/50 VDC
0.5...32 A 2,000 A (UL) 277 / 480 AC
0.5...63 A 6,000 A (UL) 50 VDC (1) pole
0.5...50 A 6,000 A (UL) 110 VDC (2) poles
20,000/10,000
20 g (10 ms)
2 Nm
3 g (10 to 55 Hz)
-25°C...+55°C (-13°F to 131°F)
1 pole (130 g); 2 pole (280 g); 3 pole (430 g)
12 mm
Voltage Current
AC 220/240 5 A
AC 277 3 A
DC 24 V 4 A
DC 60 V 1 A
DC220 V 0.4 A
#18…2 AWG (line); #18…3 AWG (load)
Current
Type Side/Middle Part No.
3 pole bus, 10 x 1010 mm, buses (19) 3 phase groupings 80A/100A 9970330000
3 pole bus, 16 x 210 mm, buses (4) 3 phase groupings 120A/130A 9970340000
3 pole bus, 16 x 1010 mm, buses (19) 3 phase groupings 120A/130A 9970350000
1 pole bus, 12 x 210 mm, buses 12 breakers 80A/100A 9970360000
1 pole bus, 12 x 210 mm (insulated), buses 12 breakers 63A 9991990000
Bus bar clamp 130A 9970370000
Auxiliary contacts 9970300000
Lock out cover 9970380000
ETO 10/26, yellow (26 mm x 10 mm) 1686401687
Internal Wiring Diagram
9
45.2
69
44 44
5
5.8
80.6
91.4
Internal Auxiliary Wiring Diagram
Auxiliary Contact Modules
Dimensions in mm
CB9100 Series
45
1 pole
2 pole
3 pole
86
644
18
36
54
59
70
14 12 11
