3M Pak 100 Pin Strip Header .100 and .100 x .100 Straight & Right Angle, Solder Tail 2400 Series S One and two row versions S Straight and right angle versions S Break to length for faster delivery, lower inventory costs, and faster prototyping S Tapered tip does not cut the socket wipe during insertion, reducing operational failures and repairs S Solder standoffs facilitate wash of flux residue, reducing costly rework S Board pin retention feature available Date Modified: March 31, 2004 TS-0767-04 Sheet 1 of 3 Physical Insulation Material: Flammability: Color: Contact Material: Plating Underplate: Wiping Area: Solder Tails: File Replace by consolidated ts file: Glass Filled Polyester (PBT) UL 94V-0 Gray Copper Alloy 100 [ 2.54 m ] Nickel -- QQ-N-290, Class 2 30 [ 0.76 m ] Gold -- MIL-G-45204, Type II, Grade C 200 [ 5.08 m ] 90/10 Tin Lead -- MIL-P-81728 Electrical Current Rating: 3 A Insulation Resistance: > 1 x 109 at 500 Vdc Withstanding Voltage: 1000 Vrms at Sea Level Environmental Temperature Rating: --55C to +105C UL File No.: E68080 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3 Interconnect Solutions http://www.3M.com/interconnects/ data_pp (For Web PDF Output) 3M Pak 100 Pin Strip Header .100 and .100 x .100 Straight & Right Angle, Solder Tail 2400 Series Straight Pin Quantity C +.020 --.005 (See note 1) One Row Two Row 01 .096 [2.44] .04 [1.0] .100 [2.54] .100 [2.54] .048 [1.22] A | .008 .048 [1.22] A | .008 .100 [2.54] B | .010 .04 [1.0] 0.49 [12.4] 12 0.59 [15.0] 07 14 0.69 [17.5] 08 16 0.79 [20.1] 09 18 0.89 [22.6] 10 20 0.99 [25.1] 1.29 [32.8] 28 1.39 [35.3] 15 30 1.49 [37.8] 16 32 1.59 [40.4] 17 34 1.69 [42.9] 18 36 1.79 [45.5] R .0075 Ref File Replace by consolidated 19 ts file:38 [ 0.190 ] 1.89 [48.0] [mm] .0 .1 .00 .000 .01 .005 ] Dimensions for Reference Only Notes; 1. This part is molded in the 40 contact quantity version. Parts that require fewer contacts are broken to length. Dimension "C" is measured from a "Molded End" to the "Center of the Break Point" beyond the desired quantity. On Pin Strips, which have break points on both ends, "C" = .100 x contact quantity per row. 2. The recommended PCB hole size for the kinked tail positions on the .112 solder tail connector is .035 .002. Refer to TS-0971 for the number of tails kinked and the position kinked. Pin Quantity: (See Table) One Row (01--40) Two Row (04--80) 10 06 26 Tolerance Unless Noted Ordering Information 05 14 Inch Recommended Mounting Hole Pattern 0.39 [ 9.9] 13 .100 | .003 [2.54] [ 08 1.19 [30.2] Pin Cross Section Inch 0.29 [ 7.4] 04 1.09 [27.7] .0245 .0005 [ 0.622 ] .100 .003 Typ [ 2.54 ] 0.19 [ 4.8] 06 24 .028 .001 [ 0.71 ] .035 .003 [0.89 ] (See Note 2) 04 03 22 .196 [4.98] .100 | .003 [2.54] 02 11 .015 .002 [ 0.38 ] .035 | .003 [0.89] (See Note 2) 0.09 [ 2.3] 12 B | .008 C +.020 -- .005 (See Note 1) Dimension C 20 40 1.99 [50.5] 21 42 2.09 [53.1] 22 44 2.19 [55.6] 23 46 2.29 [58.2] 24 48 2.39 [60.7] 25 50 2.49 [63.2] 26 52 2.59 [65.8] 27 54 2.69 [68.3] 28 56 2.79 [70.9] 29 58 2.89 [73.4] 30 60 2.99 [75.9] 31 62 3.09 [78.5] 32 64 3.19 [81.0] 33 66 3.29 [83.6] 34 68 3.39 [86.1] 35 70 3.49 [88.6] 36 72 3.59 [91.2] 37 74 3.69 [93.7] 38 76 3.79 [96.3] 39 78 3.89 [98.8] 40 80 3.98 [101.1] 24XX-6XXXTB Pin Length (Dim A) 1 = .235 2 = .318 Tail (Dim B) One Row 12=.112 Solder Tails 13=.155 Solder Tails 32=.112 Kinked Solder Tails Two Row 22=.112 Solder Tails 23=.155 Solder Tails 72=.112 Kinked Solder Tails TS-0767-04 Sheet 2 of 3 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3 Interconnect Solutions http://www.3M.com/interconnects/ data_pp (For Web PDF Output) 3M Pak 100 Pin Strip Header .100 and .100 x .100 Straight & Right Angle, Solder Tail Right Angle .04 [1.0] 2400 Series Pin Quantity C +.020 --.005 (See Note 1) .119 [3.02] .045 .002 B | .010 [ 1.14 ] R .0075 Ref [0.190] .100 [2.54] .071 [1.80] .0245 .0005 [ 0.622 ] A | .008 .028 .001 [ 0.71 ] Pin Cross Section .100 [2.54] 08 0.39 [ 9.9] 05 10 0.49 [12.4] 06 12 0.59 [15.0] 07 14 0.69 [17.5] 08 16 0.79 [20.1] 09 18 0.89 [22.6] 10 20 0.99 [25.1] 1.29 [32.8] 28 1.39 [35.3] 15 30 1.49 [37.8] 16 32 1.59 [40.4] 17 34 1.69 [42.9] .100 | .003 18 36 [2.54] File Replace by consolidated ts file: 19 38 .100 | .003 20 40 [2.54] 1.79 [45.5] .100 [2.54] Inch Pin Quantity: (See Table) One Row (01-40) Two Row (02--80) 0.29 [ 7.4] 04 26 .07 [1.8] Ordering Information 0.19 [ 4.8] 06 14 Recommended Mounting Hole Pattern [mm] Tolerance Unless Noted Inch 04 03 13 .100 .003 Typ [ 2.54 ] Notes: 1. This part is molded in the 40 contact quantity version. Parts that require fewer contacts are broken to length. Dimension "C'' is measured from a ``Molded End'' to the ``Center of the Break Point'' beyond the desired quantity. On Pin Strips, which have break points on both ends, ``C'' = .100 x contact quantity per row. 2. The recommended PCB hole size for the kinked tail positions on the .112 solder tail connector is .035 .002. Refer to ts--0971 for the number of tails kinked and the position kinked. 02 1.19 [30.2] .035 .003 [0.89 ] (See Note 2) A | .008 0.09 [ 2.3] 1.09 [27.7] .100 [2.54] .100 [2.54] 02 24 .035 .003 [ 0.89 ] ( See Note 2 ) .100 [2.54] .071 [1.80] 01 22 B | .010 .04 [1.0] Dimension C 11 C +.020 -- .005 (See Note 1) .219 [5.56] Two Row 12 .07 [1.8] .045 .002 [ 1.14 ] One Row .0 .00 .000 .1 .01 .005 [ ] Dimensions for Reference only 1.89 [48.0] 1.99 [50.5] 21 42 2.09 [53.1] 22 44 2.19 [55.6] 23 46 2.29 [58.2] 24 48 2.39 [60.7] 25 50 2.49 [63.2] 26 52 2.59 [65.8] 27 54 2.69 [68.3] 28 56 2.79 [70.9] 29 58 2.89 [73.4] 30 60 2.99 [75.9] 31 62 3.09 [78.5] 32 64 3.19 [81.0] 33 66 3.29 [83.6] 34 68 3.39 [86.1] 35 70 3.49 [88.6] 36 72 3.59 [91.2] 37 74 3.69 [93.7] 38 76 3.79 [96.3] 39 78 3.89 [98.8] 40 80 3.98 [101.1] 24XX-5XXXTB Pin Length (Dim A) 1 = .235 2 = .318 Tail (Dim B) One Row 12=.112 Solder Tails 13=.155 Solder Tails 32=.112 Kinked Solder Tails Two Row 22=.112 Solder Tails 23=.155 Solder Tails 72=.112 Kinked Solder Tails TS-0767-04 Sheet 3 of 3 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3 Interconnect Solutions http://www.3M.com/interconnects/ data_pp (For Web PDF Output) Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of 1 year from the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. 3 Electronic Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 www.3M.com/esd (c) 3M 2004