Ultra-Miniature DC to HV DC Converters 0 to + or -100 through 0 to + or - 10,000 VDC @ 0.5 Watts Q Series MODEL INPUT VOLTAGE OUTPUT*2 VOLTAGE OUTPUT*1 CURRENT INPUT CURRENT RIPPLE P-P NO LOAD*1 FULL LOAD INTERNAL OSCILLATOR FREQUENCY (TYPICAL) CASE Q01-5 0 to 5V 0 to +/-100V 5 mA <1.00% <50mA <175mA 100-200kHz A Q01-12 0 to 12V 0 to +/-100V 5 mA <1.00% <20mA <100mA 100-200kHz A Q01-24 0 to 24V 0 to +/-100V 5 mA <1.00% <10mA <50mA 100-200kHz A Q02-5 0 to 5V 0 to +/-200V 2.5 mA <0.25% <50mA <175mA 200-350kHz A Q02-12 0 to 12V 0 to +/-200V 2.5 mA <0.25% <20mA <75mA 200-350kHz A Q02-24 0 to 24V 0 to +/-200V 2.5 mA <0.25% <10mA <50mA 200-350kHz A DESCRIPTION Q03-5 0 to 5V 0 to +/-300V 1.6 mA <0.25% <50mA <175mA 125-300kHz A The Q Series is a broad line of ultra-miniature, DC to HV DC converters supplying up to 5,000 volts in 0.125 cubic inches and up to 10,000 volts in 0.614 cubic inches. These component-sized converters are ideal for applications requiring minimal size and weight. The output is directly proportional to the input voltage and is linear from approximately 0.7V input to maximum input voltage, allowing for a controllable output voltage. Isolation is < +/- 500V bias on output RTN and output power is 0.5 watts. No external components or minimum load are required. The output ripple is extremely low for this package size, as low as 0.05% (typical) and can be further reduced with the addition of an external capacitor. Light weight, low power consumption and wide temperature range make these units ideal for portable, battery-powered equipment. Application notes are available on this series. Technical assistance is readily available. Q03-12 0 to 12V 0 to +/-300V 1.6 mA <0.25% <20mA <100mA 125-300kHz A Q03-24 0 to 24V 0 to +/-300V 1.6 mA <0.10% <10mA <50mA 125-300kHz A Q04-5 0 to 5V 0 to +/-400V 1.25 mA <0.05% <50mA <175mA 200-350kHz A Q04-12 0 to 12V 0 to +/-400V 1.25 mA <0.05% <20mA <100mA 200-350kHz A Q04-24 0 to 24V 0 to +/-400V 1.25 mA <0.05% <10mA <50mA 200-350kHz A Q05-5 0 to 5V 0 to +/-500V 1 mA <0.10% <50mA <200mA 175-350kHz A Q05-12 0 to 12V 0 to +/-500V 1 mA <0.05% <20mA <100mA 175-350kHz A Q05-24 0 to 24V 0 to +/-500V 1 mA <10mA <50mA 200-350kHz A Q06-5 0 to 5V 0 to +/-600V 0.8 mA <0.10% <50mA <200mA 150-275kHz A Q06-12 0 to 12V 0 to +/-600V 0.8 mA <0.10% <20mA <100mA 175-350kHz A Q06-24 0 to 24V 0 to +/-600V 0.8 mA <0.10% <10mA <50mA 150-275kHz A Q07-5 0 to 5V 0 to +/-700V 0.7 mA <0.10% <50mA <175mA 150-275kHz A Q07-12 0 to 12V 0 to +/-700V 0.7 mA <0.10% <20mA <100mA 150-275kHz A Q07-24 0 to 24V 0 to +/-700V 0.7 mA <0.25% <10mA <50mA 75-175kHz A Q08-5 0 to 5V 0 to +/-800V 0.625 mA <0.30% <50mA <175mA 200-350kHz A Q08-12 0 to 12V 0 to +/-800V 0.625 mA <0.30% <20mA <100mA 100-200kHz A Q08-24 0 to 24V 0 to +/-800V 0.625 mA <0.25% <10mA <50mA 100-200kHz A Q09-5 0 to 5V 0 to +/-900V 0.555 mA <0.30% <50mA <175mA 125-300kHz A Ultra-Miniature Case Size No External Components Required Low Ripple and EMI/RFI Proportional Input/Output Input/Output Isolation Short Circuit Protection, short duration up to 1 min. Proven Reliability Low Leakage Current MTBF: >3 million hrs per Bellcore TR-332 Q09-12 0 to 12V 0 to +/-900V 0.555 mA <0.25% <20mA <100mA 125-300kHz A Q09-24 0 to 24V 0 to +/-900V 0.555 mA <0.30% <10mA <50mA 125-300kHz A Q10-5 0 to 5V 0 to 1,000V 0.5 mA <0.25% <50mA <175mA 400-500kHz A Q10-12 0 to 12V 0 to 1,000V 0.5 mA <0.25% <20mA <100mA 125-300kHz A Q10-24 0 to 24V 0 to 1,000V 0.5 mA <0.25% <10mA <50mA 125-300kHz A Q10N-5 0 to 5V 0 to -1,000V 0.5 mA <0.25% <50mA <175mA 125-300kHz A Q10N-12 0 to 12V 0 to -1,000V 0.5 mA <0.25% <20mA <100mA 125-300kHz A OPTIONS Q10N-24 0 to 24V 0 to -1,000V 0.5 mA <0.25% <10mA <50mA 125-300kHz A . 0.125 in3 Up to 5KV Typical delivery for low quantities: stock to one week. Larger quantities contact factory FEATURES <0.125% External Copper Shield (Add"S" to model# ie: Q10-5S) Q12-5 0 to 5V 0 to 1,200V 0.4 mA <0.25% <50mA <175mA 150-250kHz A RoHS(- `R' suffix denotes the product is designed to meet RoHS Q12N-5 0 to 5V 0 to -1,200V 0.4 mA <0.25% <50mA <175mA 150-250kHz A Alternate Input/Output configurations: contact factory Q15-5 0 to 5V 0 to 1,500V 0.3 mA <0.25% <75mA <175mA 125-350kHz A Epoxy: A. Low Outgassing (NASA approved per ASTM E-595-93) Q15N-5 0 to 5V 0 to -1,500V 0.3 mA <0.25% <75mA <200mA 125-350kHz A Q20-5 0 to 5V 0 to 2,000V 0.25 mA <0.25% <100mA <200mA 150-350kHz A Q20N-5 0 to 5V 0 to -2,000V 0.25 mA <0.25% <100mA <200mA 150-350kHz A Q30-5 0 to 5V 0 to 3,000V 0.16mA <0.50% <100mA <200mA 100-225kHz B Q30N-5 0 to 5V 0 to -3,000V 0.16mA <0.50% <100mA <200mA 125-275kHz B Q40-5 0 to 5V 0 to 4000V 0.125mA <0.50% <175mA <300mA 125-275kHz B Q40N-5 0 to 5V 0 to -4000V 0.125mA <0.50% <175mA <300mA 125-275kHz B Q50-5 0 to 5V 0 to 5000V 0.100mA <0.50% <250mA <400mA 200-350kHz B Q50N-5 0 to 5V 0 to -5000V 0.100mA <0.50% <250mA <400mA 200-350kHz B Q60-5 0 to 5V 0 to 6000V 83A <1.00% <175mA <250mA 50-100kHz C Q60N-5 0 to 5V 0 to -6000V 83A <1.00% <175mA <250mA 50-100kHz C Q80-5 0 to 5V 0 to 8000V 62.5A <1.00% <175mA <250mA 50-100kHz C Q80N-5 0 to 5V 0 to -8000V 62.5A <1.00% <175mA <250mA 50-100kHz C Q101-5 0 to 5V 0 to 10,000V 50A <1.00% <175mA <250mA 50-75kHz C Q101N-5 0 to 5V 0 to -10,000V 50A <1.00% <175mA <250mA 50-75kHz C requirements i.e Q01-5R) B. UL 94 V0 flammability rating Extended Operating Temp: (Q01-Q20) -55o to +75oC WINNER! * 2001 UC Davis Connect Most Innovative New Product Award * 1999 Electronic Products Product of the Year Award * 1998 EE Product News Runner up - Product of the Year Award APPLICATIONS Avalanche Photodiodes Photomultiplier Tubes Light Sources Piezo Devices Sustaining Ion Pumps Electrophoresis Printers Igniters Capacitor Charging Solid State Detectors e-mail sales@emcohighvoltage.com Web site www.emcohighvoltage.com *Note: 1. At Maximum Rated Output Voltage. 2. Output Voltage is load dependent. Under light or no load conditions, reduce input voltage so maximum rated output ` voltage is not exceeded. 3. Specifications after 30 minute warm-up, full load, at 25oC unless otherwise noted. Quote Now Phone (209) 267-1630 Fax (209) 267-0282 70 Forest Products Road, Sutter Creek CA 95685 We reserve the right to make changes without notification 4752BN Ultra-Miniature DC to HV DC Converters 0 to + or -100 through 0 to + or - 10,000 VDC @ 0.5 Watts Q Series PHYSICAL CHARACTERISTICS CASE A .50 (12.70) EMCO MFG CODE .20 (5.08) MIN 4 PINS DIA .025 (.64) Pin # 4 .40 (10.16) 2 3 1 .35 (8.89) Function Qxx QxxN 1 Input (-) (-) 2 Input (+) (+) 3 Output (+) (-) Output (RTN) (RTN) 4 .05 (1.27) .10 (2.54) Q60, Q80 & Q101 .85 (21.59) .20 (5.08) MIN 4 PINS DIA .016 (.41) 4 2 3 .40 (10.16) .05 (1.27) .10 (2.54) .37 (9.40) BOTTOM VIEW ` Pin Diameter .016 INPUT VOLTAGE: 0 to 5 VDC TYPICAL TURN-ON VOLTAGE: 0.7 Volts OUTPUT VOLTAGE TOLERANCE: +5%, -10% At full rated output voltage, full load, 250C. ISOLATION: <+/- 500V BIAS ON OUTPUT RTN (W4) OPERATING TEMP: -10 to +60 C STORAGE TEMP: -20 to +105 C NOTE: Do not allow output voltage to exceed maximum rating. MODEL .85 (21.59) MFG CODE .35.03(8.89) .43 (10.92) W3 #4-40 NYLON MOUNTING STUD WITH NUT INPUT LEADS #22 AWG >8"(20.3cm) W1 .68 (17.27) W4 .085 (2.16) MFG CODE ELECTRICAL SPECIFICATIONS*1 .85 (21.59) .085 (2.16) MODEL SIZE: 0.85 x 0.85 x 0.85 (21.59 x 21.59 x 21.59 ) WEIGHT: 1 Ounce (28.3 Grams) PACKAGING: Fully Encapsulated CASE MATERIAL: Glass-filled Epoxy EMCO .43 (10.92) .50 (12.70) PHYSICAL CHARACTERISTICS CASE C HIGH VOLTAGE HIGH VOLTAGE 1 *Notes: 1. Specifications after 30 minute warm-up, full load, at 25oC ` unless other wise noted. Post-wave solder installation recommended Pin Diameter .025 EMCO .50 (12.70) .15 (3.81) Dimensions are in inches Dimensional Tolerances: .03 (.76mm) (Metric Equivalents in Parenthesis) BOTTOM VIEW DANGER .50 (12.70) INPUT VOLTAGE: Models Q01-Q10: 0 to 5, 12 or 24 VDC Models Q12-Q50: 0 to 5 VDC TYPICAL TURN-ON VOLTAGE: 0.7 Volts OUTPUT VOLTAGE TOLERANCE: +5%, -10% At full rated output voltage, full load, 250C. ISOLATION: < +/- 500V BIAS ON OUTPUT RTN (PIN 4) OPERATING TEMP: -25 to +70 C (Q30 - Q50: -10 to +60 C) OPTION: EXTENDED OPERATING TEMP (Q01-Q20) -55 to 75C STORAGE TEMP: -55 to +105 C MODEL .15 (3.81) Q30 to Q50 ELECTRICAL SPECIFICATIONS*1 HIGH VOLTAGE .50 (12.70) .50 (12.70) CASE B SIZE: 0.5 x 0.5 x 0.5 (12.7 x 12.7 x 12.7 ) WEIGHT: 0.15 Ounces Approx. (4.25 Grams) PACKAGING: Fully Encapsulated CASE MATERIAL: Glass-filled Epoxy PINS: See Table Q01 to Q20 W2 .68 (17.27) BOTTOM VIEW OUTPUT LEADS #22 AWG 15KV >8"(20.3cm) Wire # Color Function Qxx QxxN W1 Red Input (+) (+) W2 Black Input (-) (-) W3 Brn Output (+) (-) W4 Vio Output (RTN) (RTN) Dimensions are in inches Dimensional Tolerances: .03 (.76mm) (Metric Equivalents in Parenthesis) *Notes: 1. Specifications after 30 minute warm-up, full load, at 25oC ` unless other wise noted. Post-wave solder installation recommended