e-mail sales@emcohighvoltage.com
Web site www.emcohighvoltage.com
Phone (209) 267-1630 Fax (209) 267-0282
70 Forest Products Road, Sutter Creek CA 95685
4752BN
*Note: 1. At Maximum Rated Output Voltage.
2. Output Voltage is load dependent. Under light or no load conditions, reduce input voltage so maximum rated output
‘ voltage is not exceeded.
3. Specifications after 30 minute warm-up, full load, at 25oC unless otherwise noted.
Ultra-Miniature DC to HV DC Converters
0 to + or -100 through 0 to + or - 10,000 VDC @ 0.5 Watts
Q Series
• 2001 UC Davis Connect
Most Innovative New Product Award
• 1999 Electronic Products
Product of the Year Award
• 1998 EE Product News
Runner up – Product of the Year Award
.
0.125 in3
Up to 5KV
DESCRIPTION
The Q Series is a broad line of ultra-miniature, DC
to HV DC converters supplying up to 5,000 volts in
0.125 cubic inches and up to 10,000 volts in 0.614
cubic inches. These component-sized converters
are ideal for applications requiring minimal size and
weight. The output is directly proportional to the
input voltage and is linear from approximately 0.7V
input to maximum input voltage, allowing for a
controllable output voltage. Isolation is < +/- 500V
bias on output RTN and output power is 0.5 watts.
No external components or minimum load are
required. The output ripple is extremely low for this
package size, as low as 0.05% (typical) and can be
further reduced with the addition of an external
capacitor. Light weight, low power consumption
and wide temperature range make these units ideal
for portable, battery-powered equipment.
Application notes are available on this series.
Technical assistance is readily available.
Typical delivery for low quantities: stock to one week.
Larger quantities contact factory
WINNER!
FEATURES
Ultra-Miniature Case Size
No External Components Required
Low Ripple and EMI/RFI
Proportional Input/Output
Input/Output Isolation
Short Circuit Protection, short duration up to 1 min.
Proven Reliability
Low Leakage Current
MTBF: >3 million hrs per Bellcore TR-332
APPLICATIONS
Avalanche Photodiodes
Photomultiplier Tubes
Light Sources
Piezo Devices
Sustaining Ion Pumps
Electrophoresis
Printers
Igniters
Capacitor Charging
Solid State Detectors
MODEL INPUT
VOLTAGE
OUTPUT*2
VOLTAGE
OUTPUT*1
CURRENT
RIPPLE
P-P
INPUT CURRENT
NO LOAD*1 FULL LOAD
Q01-5 0 to 5V 0 to +/-100V 5 mA <1.00% <50mA <175mA 100-200kHz
Q01-12 0 to 12V 0 to +/-100V 5 mA <1.00% <20mA <100mA 100-200kHz
Q01-24 0 to 24V 0 to +/-100V 5 mA <1.00% <10mA <50mA 100-200kHz
Q02-5 0 to 5V 0 to +/-200V 2.5 mA <0.25% <50mA <175mA 200-350kHz
Q02-12 0 to 12V 0 to +/-200V 2.5 mA <0.25% <20mA <75mA 200-350kHz
Q02-24 0 to 24V 0 to +/-200V 2.5 mA <0.25% <10mA <50mA 200-350kHz
Q03-5 0 to 5V 0 to +/-300V 1.6 mA <0.25% <50mA <175mA 125-300kHz
Q03-12 0 to 12V 0 to +/-300V 1.6 mA <0.25% <20mA <100mA 125-300kHz
Q03-24 0 to 24V 0 to +/-300V 1.6 mA <0.10% <10mA <50mA 125-300kHz
Q04-5 0 to 5V 0 to +/-400V 1.25 mA <0.05% <50mA <175mA 200-350kHz
Q04-12 0 to 12V 0 to +/-400V 1.25 mA <0.05% <20mA <100mA 200-350kHz
Q04-24 0 to 24V 0 to +/-400V 1.25 mA <0.05% <10mA <50mA 200-350kHz
Q05-5 0 to 5V 0 to +/-500V 1 mA <0.10% <50mA <200mA 175-350kHz
Q05-12 0 to 12V 0 to +/-500V 1 mA <0.05% <20mA <100mA 175-350kHz
Q05-24 0 to 24V 0 to +/-500V 1 mA <0.125% <10mA <50mA 200-350kHz
Q06-5 0 to 5V 0 to +/-600V 0.8 mA <0.10% <50mA <200mA 150-275kHz
Q06-12 0 to 12V 0 to +/-600V 0.8 mA <0.10% <20mA <100mA 175-350kHz
Q06-24 0 to 24V 0 to +/-600V 0.8 mA <0.10% <10mA <50mA 150-275kHz
Q07-5 0 to 5V 0 to +/-700V 0.7 mA <0.10% <50mA <175mA 150-275kHz
Q07-12 0 to 12V 0 to +/-700V 0.7 mA <0.10% <20mA <100mA 150-275kHz
Q07-24 0 to 24V 0 to +/-700V 0.7 mA <0.25% <10mA <50mA 75-175kHz
Q08-5 0 to 5V 0 to +/-800V 0.625 mA <0.30% <50mA <175mA 200-350kHz
Q08-12 0 to 12V 0 to +/-800V 0.625 mA <0.30% <20mA <100mA 100-200kHz
Q08-24 0 to 24V 0 to +/-800V 0.625 mA <0.25% <10mA <50mA 100-200kHz
Q09-5 0 to 5V 0 to +/-900V 0.555 mA <0.30% <50mA <175mA 125-300kHz
Q09-12 0 to 12V 0 to +/-900V 0.555 mA <0.25% <20mA <100mA 125-300kHz
Q09-24 0 to 24V 0 to +/-900V 0.555 mA <0.30% <10mA <50mA 125-300kHz
Q10-5 0 to 5V 0 to 1,000V 0.5 mA <0.25% <50mA <175mA 400-500kHz
Q10-12 0 to 12V 0 to 1,000V 0.5 mA <0.25% <20mA <100mA 125-300kHz
Q10-24 0 to 24V 0 to 1,000V 0.5 mA <0.25% <10mA <50mA 125-300kHz
Q10N-5 0 to 5V 0 to -1,000V 0.5 mA <0.25% <50mA <175mA 125-300kHz
Q10N-12 0 to 12V 0 to -1,000V 0.5 mA <0.25% <20mA <100mA 125-300kHz
Q10N-24 0 to 24V 0 to -1,000V 0.5 mA <0.25% <10mA <50mA 125-300kHz
Q12-5 0 to 5V 0 to 1,200V 0.4 mA <0.25% <50mA <175mA 150-250kHz
Q12N-5 0 to 5V 0 to -1,200V 0.4 mA <0.25% <50mA <175mA 150-250kHz
Q15-5 0 to 5V 0 to 1,500V 0.3 mA <0.25% <75mA <175mA 125-350kHz
Q15N-5 0 to 5V 0 to -1,500V 0.3 mA <0.25% <75mA <200mA 125-350kHz
Q20-5 0 to 5V 0 to 2,000V 0.25 mA <0.25% <100mA <200mA 150-350kHz
Q20N-5 0 to 5V 0 to -2,000V 0.25 mA <0.25% <100mA <200mA 150-350kHz
Q30-5 0 to 5V 0 to 3,000V 0.16mA <0.50% <100mA <200mA 100-225kHz
Q30N-5 0 to 5V 0 to -3,000V 0.16mA <0.50% <100mA <200mA 125-275kHz
Q40-5 0 to 5V 0 to 4000V 0.125mA <0.50% <175mA <300mA 125-275kHz
Q40N-5 0 to 5V 0 to -4000V 0.125mA <0.50% <175mA <300mA 125-275kHz
Q50-5 0 to 5V 0 to 5000V 0.100mA <0.50% <250mA <400mA 200-350kHz
Q50N-5 0 to 5V 0 to -5000V 0.100mA <0.50% <250mA <400mA 200-350kHz
Q60-5 0 to 5V 0 to 6000V 83µA <1.00% <175mA <250mA 50-100kHz
Q60N-5 0 to 5V 0 to -6000V 83µA <1.00% <175mA <250mA 50-100kHz
Q80-5 0 to 5V 0 to 8000V 62.5µA <1.00% <175mA <250mA 50-100kHz
Q80N-5 0 to 5V 0 to -8000V 62.5µA <1.00% <175mA <250mA 50-100kHz
Q101-5 0 to 5V 0 to 10,000V 50µA <1.00% <175mA <250mA 50-75kHz
Q101N-5 0 to 5V 0 to -10,000V 50µA <1.00% <175mA <250mA 50-75kHz
INTERNAL
OSCILLATOR
FREQUENCY
(TYPICAL)
CASE
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
C
C
C
C
C
C
OPTIONS
External Copper Shield (Add”S” to model# ie: Q10-5S)
RoHS(- ‘R’ suffix denotes the product is designed to meet RoHS
requirements i.e Q01-5R)
Alternate Input/Output configurations: contact factory
Epoxy: A. Low Outgassing (NASA approved per ASTM E-595-93)
B. UL 94 V0 flammability rating
Extended Operating Temp: (Q01-Q20) -55o to +75oC
We reserve the right to make changes without notification
Quote Now
.35.10
(2.54) (8.89)
DIA .025 (.64)
4 PINS
.15 (3.81)
.05 (1.27)
.50
(12.70)
.40
2
3
1
(10.16)
4
MODEL
MFG CODE
.20 (5.08) MIN
(12.70)
.50
(12.70)
.50
.37.10
(2.54) (9.40)
.15 (3.81)
.05 (1.27)
DIA .016 (.41)
4 PINS
(10.16)
.40
2
13
4
.20 (5.08) MIN
MODEL
MFG CODE
.50
(12.70)
(12.70)
.50
HIGH
EMCO
VOLTAGE
.50
(12.70)
EMCO
VOLTAGE
HIGH
Ultra-Miniature DC to HV DC Converters
0 to + or -100 through 0 to + or - 10,000 VDC @ 0.5 Watts
Q Series
Pin Diameter .025 Pin Diameter .016
BOTTOM VIEW
BOTTOM VIEW
PHYSICAL CHARACTERISTICS
SIZE: 0.5 x 0.5 x 0.5 (12.7 x 12.7 x 12.7 )
WEIGHT: 0.15 Ounces Approx. (4.25 Grams)
PACKAGING: Fully Encapsulated
CASE MATERIAL: Glass-filled Epoxy
PINS: See Table
CASE A
Q01 to Q20
CASE B
Q30 to Q50
PHYSICAL CHARACTERISTICS
SIZE: 0.85 x 0.85 x 0.85 (21.59 x 21.59 x 21.59 )
WEIGHT: 1 Ounce (28.3 Grams)
PACKAGING: Fully Encapsulated
CASE MATERIAL: Glass-filled Epoxy
ELECTRICAL SPECIFICATIONS*1
INPUT VOLTAGE: Models Q01-Q10: 0 to 5, 12 or 24 VDC
Models Q12-Q50: 0 to 5 VDC
TYPICAL TURN-ON VOLTAGE: 0.7 Volts
OUTPUT VOLTAGE TOLERANCE: +5%, -10%
At full rated output voltage, full load, 250C.
ISOLATION: < +/- 500V BIAS ON OUTPUT RTN (PIN 4)
OPERATING TEMP: -25° to +70° C (Q30 - Q50: -10° to +60° C)
OPTION: EXTENDED OPERATING TEMP (Q01-Q20) -55° to 75°C
STORAGE TEMP: -55° to +105° C
ELECTRICAL SPECIFICATIONS*1
INPUT VOLTAGE: 0 to 5 VDC
TYPICAL TURN-ON VOLTAGE: 0.7 Volts
OUTPUT VOLTAGE TOLERANCE: +5%, -10%
At full rated output voltage, full load, 250C.
ISOLATION: <+/- 500V BIAS ON OUTPUT RTN (W4)
OPERATING TEMP: -10° to +60° C
STORAGE TEMP: -20° to +105° C
NOTE: Do not allow output voltage to exceed
maximum rating.
.43
(10.92)
.085
(2.16) .085
(2.16)
HIGH VOLTAGE
DANGER .85
(21.59)
MODEL
MFG CODE
INPUT LEADS
#22 AWG
>8"(20.3cm)
#4-40 NYLON
MOUNTING STUD
WITH NUT
.68
(17.27)
BOTTOM VIEW
.68
(17.27)
W4 W2
.35±.03(8.89)
.43
(10.92)
W1W3
OUTPUT LEADS
#22 AWG 15KV
>8"(20.3cm)
.85
(21.59)
EMCO
.85
(21.59)
Wire # Color Function Qxx QxxN
W1 Red Input (+) (+)
W2 Black Input (-) (-)
W3 Brn Output (+) (-)
W4 Vio Output (RTN) (RTN)
Dimensions are in inches
Dimensional Tolerances: ± .03 (.76mm)
(Metric Equivalents in Parenthesis)
*Notes:
1. Specifications after 30 minute warm-up, full load, at 25oC ‘
‘ unless other wise noted.
Post-wave solder installation recommended
CASE C
Q60, Q80 & Q101
Pin # Function Qxx QxxN
1 Input (-) (-)
2 Input (+) (+)
3 Output (+) (-)
4 Output (RTN) (RTN)
Dimensions are in inches
Dimensional Tolerances: ± .03 (.76mm)
(Metric Equivalents in Parenthesis)
*Notes:
1. Specifications after 30 minute warm-up, full load, at 25oC
‘ unless other wise noted.
Post-wave solder installation recommended
