Tantalum Chip Capacitors
Standard / HighCap
Series/Type: B45196E, B45198E,
B45196H, B45198H
Date: July 2006
© KEMET 2006. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without KEMET'sprior express consent is prohibited.
Construction
Polar tantalum capacitors with solid
electrolyte
Conventional TaMnO2technology
Flame-retardant plastic case (UL 94 V-0)
Optionally tinned or gold-plated terminals
Features
Ultra-high volumetric efficiency
Excellent solderability
Stable temperature and frequency characteristics
Low leakage current, low dissipation factor
Low self-inductance
High resistance to shock and vibration
Suitable for use without series resistor (special operating conditions recommended)
Lead-free and material content compatible with RoHS
Some partnumbers are only available in M (±20%) tolerance; these types have a maximum
capacitance drift at +125 °C of +20%
Applications
Telecommunications (e.g. mobile phones, infrastructure)
Data processing (e.g. laptops, mainframes)
Measuring and control engineering (e.g. voltage regulators)
Automotive electronics (e.g. safety applications e.g airbags, ABS, motor management)
Medical engineering
DC/DC converters
Soldering
Suitable for reflow soldering (IR and vapor phase, in compliance with JEDEC J-STD-020 C) and
wave soldering
Delivery mode
Taped and reeled in accordance with IEC 60286-3
Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H
Standard / HighCap
Page 2 of 20Please read Important notes and
Cautions and warnings at the end of this document.
Dimensional drawing
➀Encapsulation: molded epoxy resin
➁NiFe; tinned surface Sn100 or gold-plated
➂Reduced slot length for case size A
Dimensions
Case size Dimensions in mm (inches)
KEMET EIA/IECQ L W H L2typ. W2±0.1 H2typ. P ±0.3
±(.004) ±(.012)
A 3216-18 3.2 ±0.2 1.6 ±0.2 1.6 ±0.2 3.2 1.2 1.3 0.8
(.126
±0.008)
(.063
±0.008)
(.063
±0.008)
(.126) (.047) (.051) (.031)
B 3528-21 3.5 ±0.2 2.8 ±0.2 1.9 ±0.2 3.5 2.2 1.4 0.7
(.138
±0.008)
(.110
±0.008)
(.075
±0.008)
(.138) (.087) (.055) (.027)
C 6032-28 6.0 ±0.3 3.2 ±0.3 2.5 ±0.3 6.1 2.2 1.8 1.3
(.236
±0.012)
(.126
±0.012)
(.098
±0.012)
(.240) (.087) (.071) (.051)
D 7343-31 7.3 ±0.3 4.3 ±0.3 2.8 ±0.3 7.3 2.4 1.8 1.3
(.287
±0.012)
(.169
±0.012)
(.110
±0.012)
(.287) (.094) (.071) (.051)
E 7343-44 7.3 ±0.3 4.3 ±0.3 4.1 ±0.3 7.3 2.4 1.8 1.3
(.287
±0.012)
(.169
±0.012)
(.161
±0.012)
(.287) (.094) (.071) (.051)
Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H
Standard / HighCap
Page 3 of 20Please read Important notes and
Cautions and warnings at the end of this document.
Marking
Case size A Case size B
Case sizes C, D, E
Voltage coding for case size A
Rated voltage 4 6.3 10 16 20 25 35 50
Code letter G J A C D E V T
Capacitance coding
1st and 2nd digit Capacitance in pF
3rd digit Multiplier: 6 = 106pF
7 = 107pF
8 = 108pF
Date coding
Year Month
S = 2004
T = 2005
U = 2006
V = 2007
W = 2008
X = 2009
1 = January
2 = February
3 = March
4 = April
5 = May
6 = June
7 = July
8 = August
9 = September
O = October
N = November
D = December
Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H
Standard / HighCap
Page 4 of 20Please read Important notes and
Cautions and warnings at the end of this document.
Specifications and characteristics for Standard series in brief
Series Standard
Ordering code B45196E B45198E
Technology Ta-MnO2Ta-MnO2
Terminals Tinned Gold-plated
Rated voltage (up to 85 °C) VR4 ... 50 VDC
Rated capacitance (20 °C, 120 Hz) CR0.10 ... 100 µF
Capacitance tolerance ±20%, ±10%
Maximum impedance (20 °C, 100 kHz) Zmax 0.8 ... 28 Ω
Operating temperature range Top 55 ... +125 °C
Failure rate
(1 fit = 110-9 failures/h)
CRVR≤330 µFV
CRVR> 330 µFV
(at 40 °C; ≤VR,
RS≥3Ω/V) ≤3
≤10
fit
Service life >500000 h
Leakage current (VR, 5 min, 20 °C) Ileak 10 nA/µC
Detail specification CECC 30801-801
Climatic category
(to IEC 60068-1)
(55 °C/+125 °C/56
days damp heat test)
55/125/56
Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H
Standard / HighCap
Page 5 of 20Please read Important notes and
Cautions and warnings at the end of this document.
Specifications and characteristics for HighCap series in brief
Series HighCap
Ordering code B45196H B45198H
Technology Ta-MnO2Ta-MnO2
Terminals Tinned Gold-plated
Rated voltage (up to 85 °C) VR4 ... 50 VDC
Rated capacitance (20 °C, 120 Hz) CR0.15 ... 1500 µF
Capacitance tolerance ±20%, ±10%
Maximum impedance (20 °C, 100 kHz) Zmax 0.4 ... 22 Ω
Operating temperature range Top 55 ... +125 °C
Failure rate
(1 fit = 110-9 failures/h)
CRVR≤330 µFV
CRVR> 330 µFV
(at 40 °C; ≤VR,
RS≥3Ω/V) ≤8
≤24
fit
Service life >500000 h
Leakage current (VR, 5 min, 20 °C) Ileak 10 nA/µC
Detail specification CECC 30801-802
Climatic category
(to IEC 60068-1)
(55 °C/+125 °C/56
days damp heat test)
55/125/56
Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H
Standard / HighCap
Page 6 of 20Please read Important notes and
Cautions and warnings at the end of this document.
Overview of types
(VDC)
(up to 85 °C) 4 6.3 10 16 20 25 35 50
CR(µF)
0.10 A
0.15 A A B
0.22 A A B
0.33 A B
0.47 A A B B C
0.68 A A A B C
1.0 A
1.5 A A A A B A B C C D
2.2 A A A A B A B A B C C D
3.3 A A A A B A B A B C B C C D
4.7 A A A B A B A B C A B C BC D D
6.8 A A B A B A B C A B C AB C D C D D E
10 A B A B A B C A B C A B C BC D C D D E
15 A B A B C A B C A B C BC D BC D CDE
22 A B C A B C A B C B C D B C D C D D E
33 A B C A B C A B C D BC D C D C D E DE
47 A B C A B C D B C D C D C D E D E E
68 A B C D AB C D BC D C D D E E
100 A B C D B C D B C D CD E DEE
150 B C D BC D CD E D E E
220 B C D C D E C D E DE
330 C D E CD E D E E
470 C D E D E D E
680 D E D EE
1000 E E
1500 E E
Upon request
Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H
Standard / HighCap
Page 7 of 20Please read Important notes and
Cautions and warnings at the end of this document.
Ordering code structure
B45 196E 0 685 + 10 *
Tantalum
capacitor
Series
196E = Standard, tinned terminals
198E = Standard, gold-plated terminals
196H = HighCap, tinned terminals
198H = HighCap, gold-plated terminals
Rated voltage
0=4V,1=6.3V,2=10V,3=16V,4=20V,5=25V,
6=35V,7=50V
Rated capacitance + exponent
C [pF] 10x
E.g.: 686 = 68 pF 106=68µF, 157 = 15 pF 107= 150 µF
Capacitance tolerance
M=±20%, K = ±10%
Case size
10 = A
20 = B
30 = C
40 = D
50 = E
Reel diameter
9 = 180 mm, 6 = 330 mm
Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H
Standard / HighCap
Page 8 of 20Please read Important notes and
Cautions and warnings at the end of this document.
Technical data and ordering codes
CR
(20 °C, 120 Hz)
µF
Case size DFmax
(20 °C, 120 Hz)
%
Ileak,max
(20 °C, VR,
5 min)
µA
Zmax
(20 °C,
100 kHz)
Ω
Ordering code
●Preliminary Data
* = Code number for reel diameter + = Capacitance tolerance
6 = 330-mm reel
9 = 180-mm reel
M = ±20%
K = ±10%
VR(up to 85 °C) = 4 VDC, VR(up to 125 °C) = 2.5 VDC
3.3 A 60.5 9.0 B45196E0335+10*
4.7 A 60.5 7.0 B45196E0475+10*
6.8 A 60.5 6.0 B45196H0685+10*
10 A60.5 4.5 B45196H0106+10*
10 B60.5 4.5 B45196E0106+20*
15 A60.6 4.0 B45196H0156+10*
15 B60.6 3.5 B45196E0156+20*
22 A80.9 3.5 B45196H0226+10*
22 B60.9 3.0 B45196H0226+20*
22 C60.9 2.4 B45196E0226+30*
33 A81.3 3.0 B45196H0336+10*
33 B61.3 2.5 B45196H0336+20*
33 C61.3 2.0 B45196E0336+30*
47 A10 1.9 2.8 B45196H0476+10*
47 B61.9 2.3 B45196H0476+20*
47 C61.9 1.6 B45196H0476+30*
68 A30 2.7 4.0 B45196H0686M10* ●
68 B62.7 1.8 B45196H0686+20*
68 C62.7 1.5 B45196H0686+30*
68 D62.7 1.1 B45196E0686+40*
100 A30 4.0 4.0 B45196H0107M10* ●
100 B84.0 1.6 B45196H0107+20*
100 C84.0 1.4 B45196H0107+30*
100 D84.0 0.8 B45196E0107+40*
150 B10 6.0 1.5 B45196H0157+20* ●
150 C86.0 1.3 B45196H0157+30*
150 D86.0 0.8 B45196H0157+40*
220 B20 8.8 1.5 B45196H0227M20* ●
220 C15 8.8 1.2 B45196H0227+30*
220 D88.8 0.8 B45196H0227+40*
330 C15 13.2 1.2 B45196H0337+30* ●
330 D10 13.0 0.9 B45196H0337+40*
Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H
Standard / HighCap
Page 9 of 20Please read Important notes and
Cautions and warnings at the end of this document.
CR
(20 °C, 120 Hz)
µF
Case size DFmax
(20 °C, 120 Hz)
%
Ileak,max
(20 °C, VR,
5 min)
µA
Zmax
(20 °C,
100 kHz)
Ω
Ordering code
●Preliminary Data
* = Code number for reel diameter + = Capacitance tolerance
6 = 330-mm reel
9 = 180-mm reel
M = ±20%
K = ±10%
330 E813.0 0.8 B45196H0337+50*
470 C20 14.2 1.2 B45196H0477+30* ●
470 D10 19.0 0.9 B45196H0477+40*
470 E819.0 0.6 B45196H0477+50*
680 D12 27.2 0.9 B45196H0687+40*
680 E12 27.0 0.6 B45196H0687+50*
1000 E15 40.0 0.6 B45196H0108+50* ●
1500 E25 60.0 0.6 B45196H0158+50* ●
VR(up to 85 °C) = 6.3 VDC, VR(up to 125 °C) = 4 VDC
2.2 A 60.5 10.0 B45196E1225+10*
3.3 A 60.5 7.0 B45196E1335+10*
4.7 A 60.5 5.5 B45196H1475+10*
6.8 A 60.5 4.5 B45196H1685+10*
6.8 B 60.5 4.5 B45196E1685+20*
10 A60.6 4.0 B45196H1106+10*
10 B60.6 3.5 B45196E1106+20*
15 A60.9 3.8 B45196H1156+10*
15 B60.9 3.0 B45196H1156+20*
15 C61.0 2.4 B45196E1156+30*
22 A81.4 3.0 B45196H1226+10*
22 B61.4 2.5 B45196H1226+20*
22 C61.4 2.0 B45196E1226+30*
33 A10 2.1 2.8 B45196H1336+10*
33 B62.1 2.2 B45196H1336+20*
33 C62.1 1.6 B45196H1336+30*
47 A15 3.0 3.5 B45196H1476M10* ●
47 B63.0 2.0 B45196H1476+20*
47 C63.0 1.5 B45196H1476+30*
47 D63.0 1.1 B45196E1476+40*
68 A15 4.3 3.5 B45196H1686M10* ●
68 B84.3 1.8 B45196H1686+20*
68 C64.3 1.4 B45196H1686+30*
68 D64.3 0.8 B45196E1686+40*
100 B12 6.3 1.6 B45196H1107+20*
Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H
Standard / HighCap
Page 10 of 20Please read Important notes and
Cautions and warnings at the end of this document.
CR
(20 °C, 120 Hz)
µF
Case size DFmax
(20 °C, 120 Hz)
%
Ileak,max
(20 °C, VR,
5 min)
µA
Zmax
(20 °C,
100 kHz)
Ω
Ordering code
●Preliminary Data
* = Code number for reel diameter + = Capacitance tolerance
6 = 330-mm reel
9 = 180-mm reel
M = ±20%
K = ±10%
100 C86.3 1.2 B45196H1107+30*
100 D86.3 0.8 B45196H1107+40*
150 B15 9.5 1.5 B45196H1157M20* ●
150 C89.5 1.3 B45196H1157+30*
150 D89.5 0.8 B45196H1157+40*
220 C10 14.0 1.2 B45196H1227+30*
220 D814.0 0.8 B45196H1227+40*
220 E12 14.0 0.8 B45196H1227+50*
330 C15 20.8 0.5 B45196H1337+30* ●
330 D821.0 0.8 B45196H1337+40*
330 E821.0 0.6 B45196H1337+50*
470 D15 30.0 0.9 B45196H1477+40*
470 E830.0 0.6 B45196H1477+50*
680 D20 42.8 0.5 B45196H1687+40* ●
680 E15 43.0 0.6 B45196H1687+50*
1000 E20 63.0 0.6 B45196H1108+50* ●
1500 E25 60.0 0.6 B45196H1158+50* ●
VR(up to 85 °C) = 10 VDC, VR(up to 125 °C) = 6.3 VDC
1.5 A 60.5 10.0 B45196E2155+10*
2.2 A 60.5 7.0 B45196E2225+10*
3.3 A 60.5 5.5 B45196H2335+10*
4.7 A 60.5 4.5 B45196H2475+10*
4.7 B 60.5 4.5 B45196E2475+20*
6.8 A 60.7 4.0 B45196H2685+10*
6.8 B 60.7 3.5 B45196E2685+20*
10 A61.0 3.8 B45196H2106+10*
10 B61.0 3.0 B45196H2106+20*
10 C61.0 2.4 B45196E2106+30*
15 A61.5 3.2 B45196H2156+10*
15 B61.5 2.5 B45196H2156+20*
15 C61.5 2.0 B45196E2156+30*
22 A82.2 3.2 B45196H2226+10*
22 B62.2 2.3 B45196H2226+20*
22 C62.2 1.6 B45196H2226+30*
Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H
Standard / HighCap
Page 11 of 20Please read Important notes and
Cautions and warnings at the end of this document.
CR
(20 °C, 120 Hz)
µF
Case size DFmax
(20 °C, 120 Hz)
%
Ileak,max
(20 °C, VR,
5 min)
µA
Zmax
(20 °C,
100 kHz)
Ω
Ordering code
●Preliminary Data
* = Code number for reel diameter + = Capacitance tolerance
6 = 330-mm reel
9 = 180-mm reel
M = ±20%
K = ±10%
33 A10 3.3 3.0 B45196H2336M10* ●
33 B63.3 2.0 B45196H2336+20*
33 C63.0 1.5 B45196H2336+30*
33 D63.3 1.1 B45196E2336+40*
47 B84.7 1.6 B45196H2476+20*
47 C64.7 1.4 B45196H2476+30*
47 D64.7 0.8 B45196E2476+40*
68 B86.8 1.2 B45196H2686+20* ●
68 C66.8 1.2 B45196H2686+30*
68 D66.8 0.8 B45196H2686+40*
100 B12 10.0 1.2 B45196H2107M20* ●
100 C810.0 1.2 B45196H2107+30*
100 D810.0 0.8 B45196H2107+40*
150 C10 15.0 1.0 B45196H2157+30* ●
150 D815.0 0.8 B45196H2157+40*
150 E815.0 0.8 B45196H2157+50*
220 C10 22.0 0.9 B45196H2227+30* ●
220 D10 22.0 0.8 B45196H2227+40*
220 E822.0 0.6 B45196H2227+50*
330 D12 33.0 0.9 B45196H2337+40*
330 E10 33.0 0.6 B45196H2337+50*
470 D15 47.0 0.5 B45196H2477+40* ●
470 E12 47.0 0.6 B45196H2477+50*
680 E15 68.0 0.6 B45196H2687+50* ●
VR(up to 85 °C) = 16 VDC, VR(up to 125 °C) = 10 VDC
1.0 A 40.5 10.0 B45196E3105+10*
1.5 A 60.5 8.0 B45196E3155+10*
2.2 A 60.5 6.5 B45196H3225+10*
3.3 A 60.5 5.0 B45196H3335+10*
3.3 B 60.6 5.0 B45196E3335+20*
4.7 A 60.8 4.0 B45196H3475+10*
4.7 B 60.8 3.5 B45196E3475+20*
6.8 A 61.1 3.8 B45196H3685+10*
6.8 B 61.1 3.0 B45196H3685+20*
Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H
Standard / HighCap
Page 12 of 20Please read Important notes and
Cautions and warnings at the end of this document.
CR
(20 °C, 120 Hz)
µF
Case size DFmax
(20 °C, 120 Hz)
%
Ileak,max
(20 °C, VR,
5 min)
µA
Zmax
(20 °C,
100 kHz)
Ω
Ordering code
●Preliminary Data
* = Code number for reel diameter + = Capacitance tolerance
6 = 330-mm reel
9 = 180-mm reel
M = ±20%
K = ±10%
6.8 C 61.1 2.4 B45196E3685+30*
10 A61.6 3.0 B45196H3106+10*
10 B61.6 2.5 B45196H3106+20*
10 C61.6 2.0 B45196E3106+30*
15 A82.4 3.5 B45196H3156+10* ●
15 B62.4 2.3 B45196H3156+20*
15 C62.4 1.6 B45196H3156+30*
22 B63.5 2.6 B45196H3226+20*
22 C63.5 1.5 B45196H3226+30*
22 D63.6 1.1 B45196E3226+40*
33 B85.3 2.1 B45196H3336+20* ●
33 C65.3 1.4 B45196H3336+30*
33 D65.3 1.0 B45196E3336+40*
47 C67.5 1.4 B45196H3476+30*
47 D67.5 0.8 B45196H3476+40*
68 C611.0 1.2 B45196H3686+30*
68 D611.0 0.8 B45196H3686+40*
100 C10 16.0 1.0 B45196H3107+30* ●
100 D816.0 0.8 B45196H3107+40*
100 E816.0 0.8 B45196H3107+50*
150 D10 24.0 0.9 B45196H3157+40*
150 E824.0 0.6 B45196H3157+50*
220 D15 35.2 0.9 B45196H3227+40* ●
220 E10 35.0 0.9 B45196H3227+50*
330 E12 52.8 0.4 B45196H3337+50* ●
VR(up to 85 °C) = 20 VDC, VR(up to 125 °C) = 13 VDC
0.68 A 40.5 12.0 B45196E4684+10*
1A40.5 9.0 B45196E4105+10*
1.5 A 60.5 8.0 B45196H4155+10*
2.2 A 60.5 6.0 B45196H4225+10*
2.2 B 60.5 6.0 B45196E4225+20*
3.3 A 60.7 4.0 B45196H4335+10*
3.3 B 60.7 4.5 B45196E4335+20*
4.7 A 60.9 3.5 B45196H4475+10*
Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H
Standard / HighCap
Page 13 of 20Please read Important notes and
Cautions and warnings at the end of this document.
CR
(20 °C, 120 Hz)
µF
Case size DFmax
(20 °C, 120 Hz)
%
Ileak,max
(20 °C, VR,
5 min)
µA
Zmax
(20 °C,
100 kHz)
Ω
Ordering code
●Preliminary Data
* = Code number for reel diameter + = Capacitance tolerance
6 = 330-mm reel
9 = 180-mm reel
M = ±20%
K = ±10%
4.7 B 60.9 3.0 B45196H4475+20*
4.7 C 61.0 2.4 B45196E4475+30*
6.8 A 61.4 3.0 B45196H4685+10* ●
6.8 B 61.4 2.5 B45196H4685+20*
6.8 C 61.4 2.0 B45196E4685+30*
10 A82.0 4.0 B45196H4106+10* ●
10 B62.0 2.3 B45196H4106+20*
10 C62.0 1.6 B45196H4106+30*
15 B63.0 2.5 B45196H4156+20* ●
15 C63.0 1.5 B45196H4156+30*
15 D63.0 1.2 B45196E4156+40*
22 B64.4 2.5 B45196H4226+20* ●
22 C64.4 1.4 B45196H4226+30*
22 D64.4 1.0 B45196E4226+40*
33 C66.6 1.5 B45196H4336+30*
33 D66.6 0.8 B45196H4336+40*
47 C69.4 0.9 B45196H4476+30* ●
47 D69.4 0.8 B45196H4476+40*
47 E69.4 0.8 B45196H4476+50*
68 D614.0 0.9 B45196H4686+40*
68 E614.0 0.8 B45196H4686+50*
100 D820.0 0.9 B45196H4107+40* ●
100 E820.0 0.8 B45196H4107+50*
150 E10 30.0 0.4 B45196H4157+50* ●
VR(up to 85 °C) = 25 VDC, VR(up to 125 °C) = 16 VDC
0.47 A 40.5 13.0 B45196E5474+10*
0.68 A 40.5 10.0 B45196E5684+10*
1A40.5 8.0 B45196H5105+10*
1.5 A 60.5 7.0 B45196H5155+10*
1.5 B 60.5 7.0 B45196E5155+20*
2.2 A 60.6 7.0 B45196H5225+10*
2.2 B 60.6 5.0 B45196E5225+20*
3.3 A 60.8 3.7 B45196H5335+10* ●
3.3 B 60.8 4.0 B45196H5335+20*
Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H
Standard / HighCap
Page 14 of 20Please read Important notes and
Cautions and warnings at the end of this document.
CR
(20 °C, 120 Hz)
µF
Case size DFmax
(20 °C, 120 Hz)
%
Ileak,max
(20 °C, VR,
5 min)
µA
Zmax
(20 °C,
100 kHz)
Ω
Ordering code
●Preliminary Data
* = Code number for reel diameter + = Capacitance tolerance
6 = 330-mm reel
9 = 180-mm reel
M = ±20%
K = ±10%
3.3 C 60.9 2.8 B45196E5335+30*
4.7 A 81.2 4.0 B45196H5475+10* ●
4.7 B 61.2 3.2 B45196H5475+20*
4.7 C 61.2 2.3 B45196E5475+30*
6.8 A 81.7 4.0 B45196H5685+10* ●
6.8 B 61.7 2.8 B45196H5685+20*
6.8 C 61.7 2.0 B45196H5685+30*
6.8 D 61.7 1.8 B45196E5685+40*
10 B62.5 2.5 B45196H5106+20* ●
10 C62.5 1.6 B45196H5106+30*
10 D62.5 1.2 B45196E5106+40*
15 B83.8 2.5 B45196H5156+20* ●
15 C63.8 1.5 B45196H5156+30*
15 D63.8 1.0 B45196E5156+40*
22 C65.5 1.4 B45196H5226+30*
22 D65.5 0.8 B45196H5226+40*
33 C68.3 0.9 B45196H5336+30* ●
33 D68.3 0.8 B45196H5336+40*
33 E68.3 0.8 B45196H5336+50*
47 D612.0 0.8 B45196H5476+40*
47 E612.0 0.8 B45196H5476+50*
68 E617.0 0.9 B45196H5686+50*
100 E10 25.0 0.4 B45196H5107+50* ●
VR(up to 85 °C) = 35 VDC, VR(up to 125 °C) = 23 VDC
0.10 A 40.5 28.0 B45196E6104+10*
0.15 A 40.5 23.0 B45196E6154+10*
0.22 A 40.5 19.0 B45196E6224+10*
0.33 A 40.5 15.0 B45196E6334+10*
0.47 A 40.5 11.0 B45196H6474+10*
0.47 B 40.5 11.0 B45196E6474+20*
0.68 A 40.5 8.0 B45196H6684+10*
0.68 B 40.5 8.0 B45196E6684+20*
1A40.5 7.0 B45196H6105+10*
1B40.5 7.0 B45196E6105+20*
Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H
Standard / HighCap
Page 15 of 20Please read Important notes and
Cautions and warnings at the end of this document.
CR
(20 °C, 120 Hz)
µF
Case size DFmax
(20 °C, 120 Hz)
%
Ileak,max
(20 °C, VR,
5 min)
µA
Zmax
(20 °C,
100 kHz)
Ω
Ordering code
●Preliminary Data
* = Code number for reel diameter + = Capacitance tolerance
6 = 330-mm reel
9 = 180-mm reel
M = ±20%
K = ±10%
1.5 A 60.5 7.5 B45196H6155+10* ●
1.5 B 60.5 6.0 B45196H6155+20*
1.5 C 60.6 4.8 B45196E6155+30*
2.2 A 60.8 4.5 B45196H6225+10* ●
2.2 B 60.8 4.0 B45196H6225+20*
2.2 C 60.8 3.2 B45196E6225+30*
3.3 B 61.2 3.5 B45196H6335+20*
3.3 C 61.2 2.4 B45196E6335+30*
4.7 B 61.6 3.1 B45196H6475+20* ●
4.7 C 61.6 2.0 B45196H6475+30*
4.7 D 61.7 1.5 B45196E6475+40*
6.8 C 62.4 1.8 B45196H6685+30*
6.8 D 62.4 1.2 B45196E6685+40*
10 C63.5 1.6 B45196H6106+30*
10 D63.5 1.0 B45196E6106+40*
15 C65.3 1.4 B45196H6156+30* ●
15 D65.3 0.8 B45196H6156+40*
22 D67.7 0.8 B45196H6226+40*
22 E67.7 0.8 B45196H6226+50*
33 D811.6 0.9 B45196H6336+40* ●
33 E612.0 0.8 B45196H6336+50*
47 E616.0 0.9 B45196H6476+50*
VR(up to 85 °C) = 50 VDC, VR(up to 125 °C) = 33 VDC
0.1 A 40.5 27.0 B45196E7104+10*
0.15 A 40.5 22.0 B45196H7154+10*
0.15 B 40.5 22.0 B45196E7154+20*
0.22 A 40.5 18.0 B45196H7224+10*
0.22 B 40.5 18.0 B45196E7224+20*
0.33 B 40.5 14.0 B45196E7334+20*
0.47 B 40.5 9.0 B45196H7474+20*
0.47 C 40.5 7.2 B45196E7474+30*
0.68 C 40.5 6.4 B45196E7684+30*
1C40.5 4.8 B45196E7105+30*
1.5 C 60.8 4.4 B45196H7155+30*
Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H
Standard / HighCap
Page 16 of 20Please read Important notes and
Cautions and warnings at the end of this document.
CR
(20 °C, 120 Hz)
µF
Case size DFmax
(20 °C, 120 Hz)
%
Ileak,max
(20 °C, VR,
5 min)
µA
Zmax
(20 °C,
100 kHz)
Ω
Ordering code
●Preliminary Data
* = Code number for reel diameter + = Capacitance tolerance
6 = 330-mm reel
9 = 180-mm reel
M = ±20%
K = ±10%
1.5 D 60.8 4.0 B45196E7155+40*
2.2 C 61.1 3.2 B45196H7225+30*
2.2 D 61.1 2.8 B45196E7225+40*
3.3 C 61.7 2.5 B45196H7335+30*
3.3 D 61.7 1.6 B45196E7335+40*
4.7 D 62.4 1.2 B45196E7475+40*
6.8 D 63.4 0.8 B45196H7685+40*
6.8 E 63.4 0.8 B45196H7685+50*
10 D85.0 0.8 B45196H7106+40* ●
10 E65.0 0.8 B45196H7106+50*
15 E67.5 0.9 B45196H7156+50*
Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H
Standard / HighCap
Page 17 of 20Please read Important notes and
Cautions and warnings at the end of this document.
Cautions and warnings
When using tantalum capacitors with a manganese dioxide coating, the following cautions and
warnings should be taken into account:
Polarity
Because tantalum capacitors are polar capacitors, it is important to observe their polarity
markings (positive pole on the anode, negative pole on the cathode). Any incorrect polarity
resulting from the sum of the AC and DC voltage components must be smaller than or equal to
the permitted polarity reversal voltage. To avoid reducing their reliability, this voltage may only
occur for a short time, at most five times for a duration of one minute per hour.
Voltage
The maximum continuous voltage depends on the ambient temperature. Within the temperature
range of 55 to +85 °C, the rated voltage is equal to the maximum continuous voltage. Between
+ 85 and + 125 °C the maximum continuous voltage must be reduced linearly from the full rated
voltage to 2/3 of it (derating). At 150 °C (only B4519*P series) the voltage must be reduced to 1/2
and at 175 °C (only B4519*T series) to 1/3 of the rated voltage. Operation below the maximum
continuous voltage has a positive effect on the capacitor’s failure rate. The maximum continuous
voltage must not be exceeded.
All unfavourable operating conditions (such as possible line overvoltages, unfavourable
tolerances of the transformation ratio of the line transformer in the equipment, repeated
overvoltages when the equipment is switched on, high ambient temperatures) must be taken into
account when determining the operating voltage.
The surge voltage is the maximum voltage (peak value) that may be applied to the capacitor for
short periods, at most five times for a total duration of up to 1 minute per hour. The surge voltage
must not be applied for periodic charging and discharging in the course of normal operation and
cannot be part of the operating voltage. The permissible surge voltage for all capacitors in this
data book is 1.3 x the rated voltage. The occurrence of voltage impulses (transient voltages) that
exceed the surge voltage may lead to irreparable damage.
Capacitance
The actual capacitance of a capacitor can deviate from the rated capacitance by as much as the
full magnitude of the tolerance at delivery. The capacitance varies with the temperature (at
+125 °C +12% up to +20%) and decreases with increasing frequency.
Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H
Standard / HighCap
Page 18 of 20Please read Important notes and
Cautions and warnings at the end of this document.
Low-resistance applications and voltage networks
For low-resistance applications, KEMET recommends a maximum operating voltage of half the
permissible maximum continuous voltage, so that the capacitors have sufficient tolerance to
withstand voltage peaks. Depending on the conditions of use, the early failure rate is higher here
by a factor of 2 to 20 than in the range with a constant failure rate as specified in the data book.
When operated directly in a voltage network, the capacitor should be protected against
overvoltage, e.g. by a suppressor diode, and against polarity reversal by a diode. If a capacitor is
operated in an unprotected low-impedance circuit and fails because the permissible conditions for
the forward DC voltage, reverse DC voltage, surge current, power dissipation or temperature are
exceeded, the continued current flow through the overstressed capacitor may produce
overheating. The overheated capacitor may damage the surrounding components and the circuit
board.
Storage conditions
Capacitors with solid electrolyte may be stored at temperatures down to –80 °C. The upper
storage temperature must not exceed +85 °C (for blister tape the temperature limit is +40 °C).
The storage conditions should not exceed +40 °C and 70% R. H. A drypack is useful to prevent
the effects of humidity.
Tantalum chip capacitors B45196E, B45198E, B45196H, B45198H
Standard / HighCap
Page 19 of 20Please read Important notes and
Cautions and warnings at the end of this document.
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical re-
quirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, KEMET is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether a KEMET product with the properties de-
scribed in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic compon-
ents or failure before the end of their usual service life cannot be completely ruled out
in the current state of the art, even if they are operated as specified. In customer applica-
tions requiring a very high level of operational safety and especially in customer applications
in which the malfunction or failure of a passive electronic component could endanger human
life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured
by means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of a passive electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as “hazardous”). Should you have any more detailed questions,
please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an or-
der.
We also reserve the right to discontinue production and delivery of products. Con-
sequently, we cannot guarantee that all products named in this publication will always be
available.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the “General Terms of Delivery for Products and Services in the Electrical In-
dustry” published by the German Electrical and Electronics Industry Association
(ZVEI).
Important notes
Page 20 of 20
