Two Chip TO-220 AB Series SIDACtor Data Book Two Chip TO-220 AB Series The two chip TO-220 AB series SIDACtor is a 100A rated solid state protection device designed for telecommunications applications that reference Tip and Ring to earth ground but do not require balanced protection. The AB series SIDACtor is used to help equipment meet various regulatory requirements including: Beilcore 1089, ITU K.20 & K.21, IEC 950, UL 1459 & 1950 and FCC Part 68. Electrical Parameters P0602AB P1402AB P1602AB P2202AB P2702AB P3002AB P3602AB P4202AB P4802AB P6002AB at ao] oy oy oe my oy OF] My om al, al al a] at oy oy oy any oH Notes: - All measurements are made at an ambient temperature of 25C. * Listed SIDACtors are bi-directional. All electrical parameters & surge ratings apply to forward and reverse polarities. * Vorm is measured at lorm. * Vg is measured at 100V/us. + Special voltage (Vs & Vory) and holding current (1,4) requirements are available upon request. Off-state capacitance is measured at 1MHz with a 2 volt bias and is a typical value. Surge Ratings AB 150 100 1-18 Teccor Electronics, Inc. (972) 580-7777 SIDACtor Data Book Two Chip TO-220 AB Series Thermal Considerations Series | Parameter Nala | Unit. Junction Temperature Range -40 to +150 C Ts Storage Temperature Range -65 to +150 C AB Ty Maximum Case Temperature +115 C Rejc Thermal Resistance: junction to case +12 CW Reja Thermal Resistance: junction to ambient +50 CW V-! Characteristics t-xty Pulse Wave-form +] A a {= rise time to peak value ip > |= = Peak ty = decay time to half value lg Lf - < ty |e 2 i 5 | pli. V one Pot ay 2 50 \_ Half Value to oof ft a ! Vr Vorm | 3 : Vs & ee = 0 t ty 0 . t - Time (us) -l Normalized Vg Change vs. Normalized DC Holding Current vs. Junction Temperature Case Temperature x o w o N 2 a 2 e oO a = > rs) 6 2 8 : : 2 t t -40 -20 0 20 40 60 80100120140 160 Case Temperature (Tc) - C -40 -20 0 20 40 60 80100120140 160 Junction Temperature (Ty) - C Teccor Electronics, Inc. 1-19 (972) 580-7777