TECHNICAL DATA SHEET Gort Road Business Park, Ennis, Co. Clare, Ireland. Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803 Website: http://www.microsemi.com 5000W Transient Voltage Suppressor DEVICES - High Reliability controlled devices - Unidirectional (A) and Bidirectional (CA) construction - Plastic encapsulated TVS series for Thru Hole mounting - Selections for 5.0 to 110 V standoff voltages (VWM) M5KP5.0A thru M5KP110CA, e3 LEVELS M, MA, MX, MXL FEATURES High reliability controlled devices with wafer fabrication and assembly lot traceability 100 % surge tested devices Suppresses transients up to 5000 watts @10/1000 s and 34000 watts @ 8/20 s (see Figure 1) Optional upscreening available by replacing M prefix with MA, MX or MXL prefixes. These prefixes specify various screening and conformance inspection options based on MIL-PRF-19500. Refer to MicroNote 129 for more details on the screening options. Metal hermetically sealed DO-13 axial-leaded equivalents available in the LC6.5A - LC170A series in separate data sheet Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B RoHS Compliant devices available by adding "e3" suffix 3 lot norm screening performed on Standby Current ID APPLICATIONS / BENEFITS CASE 5A (DO-204AR) Protection from switching transients and induced RF Fast response Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4 Secondary lightning protection per IEC61000-4-5 with 42 Ohms source impedance: Class 1,2,3,4: M5KP5.0A to M5KP110CA Class 5: M5KP5.0A to M5KP110CA (short distance) Class 5: M5KP5.0A to M5KP36CA (long distance) Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance: o Class 1 & 2: M5KP5.0A to M5KP110CA o Class 3: M5KP5.0A to M5KP78CA o Class 4: M5KP5.0A to M5KP40CA Secondary lightning protection per IEC61000-4-5 with 2 Ohms source impedance: Class 2: M5KP5.0A to M5KP70CA Class 3: M5KP5.0 to M5KP36CA Class 4: M5KP5.0 to M5KP18CA MAXIMUM RATINGS Peak Pulse Power dissipation at 25 C: 5000 watts at 10/1000 s (also see Figures 1 and 2) with impulse repetition rate (duty factor) of 0.05 % or less tclamping (0 volts to VBR min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional Operating and Storage temperature: -65 C to +150 C Thermal resistance: 20C/W junction to lead, or 80C/W junction to ambient when mounted on FR4 PC board with 4 mm2 copper pads (1oz) and track width 1 mm, length 25 mm Steady-State Power dissipation: 6 watts at TL = 30 C, or 1.56 watts at TA = 25 C when mounted on FR4 PC board described for thermal resistance Forward Surge Voltage: 3.5 V maximum @ 100 Amps 8.3 ms half-sine wave (unidirectional devices only) Solder temperatures: 260 C for 10 s (maximum) RF01010 Rev A, June 2010 High Reliability Product Group Page 1 of 4 TECHNICAL DATA SHEET Gort Road Business Park, Ennis, Co. Clare, Ireland. Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803 Website: http://www.microsemi.com ___________________________________________________________________________________________________________________________________ MECHANICAL AND PACKAGING Void-free transfer molded thermosetting epoxy body meeting UL94V-0 Tin-Lead (90 % Sn, 10 % Pb) or RoHS (100% Sn) Compliant annealed matte-Tin plating readily solderable per MIL-STD-750, method 2026 Body marked with part number Cathode indicated by band. No cathode band on bi-directional devices. Available in Bulk or custom tape-and-reel packaging TAPE-AND-REEL standard per EIA-296 for axial package (add "TR" suffix to part number) Weight: 1.4 gram (approximately) PACKAGE DIMENSIONS CASE 5A Dimensions in inches SYMBOLS & DEFINITIONS Symbol VWM PPP VBR ID Definition Symbol Working Peak (Standoff) Voltage Peak Pulse Power Breakdown Voltage Standby Current RF01010 Rev A, June 2010 IPP VC IBR Definition Peak Pulse Current Clamping Voltage Breakdown Current for VBR High Reliability Product Group Page 2 of 4 TECHNICAL DATA SHEET Gort Road Business Park, Ennis, Co. Clare, Ireland. Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803 Website: http://www.microsemi.com ___________________________________________________________________________________________________________________________________ ELECTRICAL CHARACTERISTICS @ 25oC MICROSEMI PART NUMBER (Note 2) REVERSE STAND-OFF VOLTAGE VWM (Note 1) M5KP5.0A M5KP6.0A M5KP6.5A M5KP7.0A M5KP7.5A M5KP8.0A M5KP8.5A M5KP9.0A M5KP10A M5KP11A M5KP12A M5KP13A M5KP14A M5KP15A M5KP16A M5KP17A M5KP18A M5KP20A M5KP22A M5KP24A M5KP26A M5KP28A M5KP30A M5KP33A M5KP36A M5KP40A M5KP43A M5KP45A M5KP48A M5KP51A M5KP54A M5KP58A M5KP60A M5KP64A M5KP70A M5KP75A M5KP78A M5KP85A M5KP90A M5KP100A M5KP110A 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 90 100 110 V NOTE 1: NOTE 2: BREAKDOWN VOLTAGE VBR @ IBR V 6.40 - 7.00 6.67 - 7.37 7.22 - 7.98 7.78 - 8.60 8.33 - 9.21 8.89 - 9.83 9.44 - 10.4 10.0 - 11.1 11.1 - 12.3 12.2 - 13.5 13.3 - 14.7 14.4 - 15.9 15.6 - 17.2 16.7 - 18.5 17.8 - 19.7 18.9 - 20.9 20.0 - 22.1 22.2 - 24.5 24.4 - 26.9 26.7 - 29.5 28.9 - 31.9 31.1 - 34.4 33.3 - 36.8 36.7 - 40.6 40.0 - 44.2 44.4 - 49.1 47.8 - 52.8 50.0 - 55.3 53.3 - 58.9 56.7 - 62.7 60.0 - 66.3 64.4 - 71.2 66.7 - 73.7 71.1 - 78.6 77.8 - 86.0 83.3 - 92.1 86.7 - 95.8 94.4 - 104.0 100 - 111 111 - 123 122 - 135 MAXIMUM CLAMPING VOLTAGE VC @ IPP mA 50 50 50 50 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 MAXIMUM STANDBY CURRENT ID @ VWM MAXIMUM PEAK PULSE CURRENT IPP (FIG. 2) MAXIMUM TEMPERATURE COEFFICIENT OF VBR V(BR) V A A mV/ C 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.5 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113 121 126 137 146 162 177 2000* 5000 2000 1000 250 150 50 20 15 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 543 485 447 417 388 367 347 325 294 274 251 232 215 206 192 181 172 154 141 128 119 110 103 94 86 78 72 69 65 61 57 53 52 49 44 41 40 36 34 31 28 4.0 4.0 4.0 5.0 6.0 6.0 7.0 8.0 9.0 10 11 12 13 15 16 18 19 22 24 27 29 30 35 38 40 45 49 51 55 60 64 69 70 75 84 90 94 102 109 122 132 Transient Voltage Suppressors are normally selected with reverse "Stand Off Voltage" VWM which should be equal to or greater than the dc or continuous peak operating voltage level For bidirectional construction, indicate a CA suffix after the part number * For the 5KP5.0CA double the ID Maximum Standby Current to 4000 A RF01010 Rev A, June 2010 High Reliability Product Group Page 3 of 4 TECHNICAL DATA SHEET Gort Road Business Park, Ennis, Co. Clare, Ireland. Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803 Website: http://www.microsemi.com ___________________________________________________________________________________________________________________________________ PPP Peak Pulse Power - kW GRAPHS tp - Pulse Time - sec C - Capacitance - pico farads FIGURE 1 - Peak Pulse Power vs. Pulse Time to 50% of Exponentially Decaying Pulse Test waveform parameters: tr=10 s, tp=1000 s FIGURE 2 - Pulse Waveform RF01010 Rev A, June 2010 V(BR) Breakdown Voltage - Volts FIGURE 3 Typical Capacitance vs Breakdown Voltage High Reliability Product Group Page 4 of 4