SBT250-10J Ordering number : ENN7799 SBT250-10J Schottky Barrier Diode (Twin Type * Cathode Common) 100V, 25A Rectifier Applications * High frequency rectification (switching regulators, converters, choppers). Features * * * * * * Guaranteed up to Tj=150C. Low forward voltage (VF max=0.80V). Short reverse recovery time. Low switching noise. High reliability due to highly reliable planar structure. Attachment workability is good by Mica-less package. Specifications Absolute Maximum Ratings at Ta=25C Parameter Symbol Repetitive Peak Reverse Voltage Nonrepetitive Peak Reverse Surge Voltage Conditions Ratings VRRM VRSM Average Output Current IO Surge Forward Current IFSM 50Hz resistive load, Sine wave Tc=42C 50Hz sine wave, 1 cycle Unit 100 V 105 V 25 A 100 A Junction Temperature Tj --55 to +150 C Storage Temperature Tstg --55 to +150 C Electrical Characteristics at Ta=25C Parameter Symbol Reverse Voltage VR Forward Voltage VF Reverse Current IR Interterminal Capacitance C Thermal Resistance Rth(j-c) Conditions IR=3mA, Tj=25C* IF=9.5A, Tj=25C* Ratings min typ max 100 VR=50V, Tj=25C* VR=10V, Tj=25C* Junction-Case : Smoothed DC Unit V 0.80 V 0.3 mA 3.4 C / W 280 pF Note) * : Value per element Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 31505SD TS IM TB-00001226 No.7799-1/3 SBT250-10J Package Dimensions unit : mm 1178A Electrical Connection Anode Anode 4.5 2.8 16.0 3.2 7.2 3.5 7.2 10.0 5.6 18.1 Cathode 2.4 14.0 1.6 1.2 0.7 0.75 1 2 1 : Anode 2 : Cathode 3 : Anode 3 2.55 2.4 2.55 2.55 IF -- VF 100 7 5 3 2 Represented by max 50C 25C 3 Tj=1 Reverse Current, IR -- mA 2 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 0.01 ax m 0C 5 Tj=1 100 7 5 yp C t 150 3 yp C t 125 2 10 7 5 100 C typ 3 2 1.0 0 0.5 1.0 1.5 2.0 Forward Voltage, VF -- V Average Forward Power Dissipation, PF(AV) -- W IR -- VR 5 Rectangular wave (4) 30 25 (3) (2) (1) 360 Sine wave 20 180 15 360 10 (1)Rectangular wave =60 (2)Rectangular wave =120 (3)Rectangular wave =180 (4)Sine wave =180 5 0 0 5 10 15 20 40 20 Average Forward Current, IO -- A 25 30 IT09193 60 80 100 Reverse Voltage, VR -- V IT09159 PF(AV) -- IO 35 0 2.5 Average Reverse Power Dissipation, PR(AV) -- W Forward Current, IF -- A SANYO : TO-220ML 2.55 PR(AV) -- VRM 20 18 16 14 12 120 IT09160 PR max at Tj=150C (1) (1)Rectangular wave =300 (2)Rectangular wave =240 (3)Rectangular wave =180 (4)Sine wave =180 Rectangular wave (2) (3) VR 10 8 360 Sine wave 6 (4) VR 4 180 360 2 0 0 20 40 60 80 Peak Reverse Voltage, VRM -- V 100 120 IT09162 No.7799-2/3 SBT250-10J Tc -- IO 160 120 Interterminal Capacitance, C -- pF Case Temperature, Tc -- C 140 Sine wave 100 360 180 80 60 40 Rectangular wave 20 (1) 360 (2) f=100kHz 1000 7 5 3 2 100 7 (4) (3) 5 0 5 10 20 15 25 Average Output Current, IO -- A Current waveform 50Hz sine wave IS 100 20ms t 80 60 40 20 0 7 0.01 2 3 5 7 0.1 2 Time, t -- s 3 5 7 1.0 7 1.0 2 3 ID01097 2 3 5 7 10 2 3 5 Reverse Voltage, VR -- V IT09194 IFSM -- t 120 5 30 Transient Thermal Resistance, Rth(j-c) -- C / W 0 Surge Forward Current, IFSM(Peak) -- A C -- VR 2 (1)Rectangular wave =60 (2)Rectangular wave =120 (3)Rectangular wave =180 (4)Sine wave =180 7 100 2 ID01096 Rth(j-c) -- t 10 7 5 3 2 1.0 7 5 3 2 0.1 0.001 0.01 0.1 1.0 10 100 1000 Time, t -- s 10000 IT06973 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of March, 2005. Specifications and information herein are subject to change without notice. PS No.7799-3/3