02/11/2015 www.crouzet.com O 63 mm 33 and 67 Watts 33 W Part number 82830010 Long service life Usable power : 27 to 50 W For low-speed, high-power drive applications With 2 ball bearings Power supply via 2 output leads Part numbers 82830010 Type Type Voltage References 33 W 828300 24 V Without encoder Specifications No-load characteristics Speed of rotation (rpm) Absorbed power (W) Absorbed current (A) 2100 4,8 0,2 Nominal characteristics Speed (rpm) Torque (mNm) Usable power (W) Absorbed power (W) Absorbed current (A) Gearbox case temperature rise (C) Efficiency (%) 1500 172 27 45 1,9 50 60 General characteristics Insulation class (conforming to IEC 85) Protection (IEC/EN 60529) Max. output power (W) Start torque (mNm) Starting current (A) Resistance () Inductance (mH) Torque constant (Nm/A) Electrical time constant (ms) Mechanical time constant (ms) Thermal time constant (mn) F (155 C) IP20 33 600 6,2 3,9 6,4 0,1 1,64 19 37 Inertia (g.cm2 ) Weight (g) Number of of segments Service life (h) Ball bearings Wires length (mm) 492 840 12 5000 200 Encoder characteristics Current consumption (mA) Output current (mA) Supply (V) Ambient temperature (C) 0,15 15 < 20 (25 C) 4,5 35 DC -25 +85 Accessories Connection Code Pre-assembled female connector, casing 179228-3, tags 179227-1 and leads AWG24 250 mm 79209895 Made to order products, available on request Other supply voltages Shaft lengths at front and/or rear Built-in interference suppression Encoders Other fixing flanges on front and rear Short version possible (L = 90 mm) Dimensions (mm) Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected 02/11/2015 www.crouzet.com 82 830 0 - 82 830 5 without encoder No Legend 4 holes O 3.65 0.05 at 90 over O 48 4 holes M5 over O 40 mm depth 7 mm 4 holes M5 over O 40 mm depth 7 mm Dimensions (mm) Encoder on types 828300 - 828305 Curves 828300 No Legend rpm Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected 02/11/2015 www.crouzet.com Torque/speed curve Curves 828300 No Legend Torque/current curve Connections Encoder No Legend Signal output 0 V DC (encoder power ground supply) Emitting diode Power supply V DC Product adaptations Special output shaft Pinion on output shaft Special supply voltage Special cable length Special ball bearings Optical or Hall effect encoder - 1 or 2 channels - other resolutions Special mounting plate Special connectors EMC filter Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected